esmPortCfgPause
ALCATEL-ENT1-PORT-MIB ·
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13
Object
column
r/w
Enumeration
This object is used to configure the default
administrative PAUSE mode for this interface.
This object represents the
administratively-configured PAUSE mode for this
interface. If auto-negotiation is not enabled
or is not implemented for the active MAU
attached to this interface, the value of this
object determines the operational PAUSE mode
of the interface whenever it is operating in
full-duplex mode. In this case, a set to this
object will force the interface into the
specified mode.
If auto-negotiation is implemented and enabled
for the MAU attached to this interface, the
PAUSE mode for this interface is determined by
auto-negotiation, and the value of this object
denotes the mode to which the interface will
automatically revert if/when auto-negotiation is
later disabled. For more information on what
pause values will be autonegotiated based on
settings on this object, please refer to the
truth table in the users manual.
Note that the value of this object is ignored
when the interface is not operating in
full-duplex mode.
Context
- MIB
- ALCATEL-ENT1-PORT-MIB
- OID
.1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- esmConfEntry
- Table
- esmConfTable
- Siblings
- 39
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | enabledXmit |
3 | enabledRcv |
4 | enabledXmitAndRcv |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esmPortSlot The physical Slot number for this Ethernet Port.
Slot number has been added to be used by the private Trap. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.1 |
| esmPortCfgMaxFrameSize Configure the value of the maximum frame
size allow.
For 10Mbps the range is upto 1518 bytes.
For ports with speed > 10Mbps the value can extend upto 9216 by… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.11 |
| esmPortAlias This object is an 'alias' name for the interface as
specified by a network manager, and provides a non-volatile
'handle' for the interface.
On the first instantiati… | column | OctetString | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.12 |
| esmPortCfgAutoNegotiation Allow the user to enable or disable the port auto negotiation. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.15 |
| esmPortCfgCrossover Allow the user to configure port crossover.
This object is applicable only to copper ports.
For fiber ports notapplicable is returned as a status. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.16 |
| esmPortCfgHybridActiveType This object is only applicable to hybrid ports .
It indicates configured active media type.(the operational media
type may be different if esmPortCfgHybridMode is configured to be… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.18 |
| esmPortCfgHybridMode This object is only applicable to hybrid ports.
This allows the user the user to configure the media type
with which the port should come up.
The user can configure the port to co… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.19 |
| esmPortIF The on-board interface number for this Ethernet Port.
Port Number has been added to be used by the private Trap. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.2 |
| esmPortOperationalHybridType This object is only applicable to hybrid ports .
It indicates the actual media type that has link up and is or will be
passing traffic. If link is not present the object will ret… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.20 |
| esmPortBcastRateLimitEnable Enable/disable per port broadcast traffic rate limit. When 'enable' value from
esmPortBcastRateLimit object will be applicable to the ingressing broadcast traffic if
the speed is … | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.21 |
| esmPortBcastRateLimitType The unit applicable to the value in esmPortBcastRateLimit object. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.22 |
| esmPortBcastRateLimit The value of the maximum broadcast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port spe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.23 |
| esmPortMcastRateLimitEnable Enable/disable per port multicast traffic rate limit. When 'enable' value from
esmPortMcastRateLimit object will be applicable to the ingressing multicast traffic if
the speed is … | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.24 |
| esmPortMcastRateLimitType The unit applicable to the value in esmPortMcastRateLimit object. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.25 |
| esmPortMcastRateLimit The value of the maximum multicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current port spe… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.26 |
| esmPortUucastRateLimitEnable Enable/disable per port unknown unicast traffic rate limit. When 'enable' value from
esmPortUucastRateLimit object will be applicable to the ingressing unknown unicast traffic if
… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.27 |
| esmPortUucastRateLimitType The unit applicable to the value in esmPortUucastRate object. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.28 |
| esmPortUucastRateLimit The value of the maximum unknown unicast traffic that can flow
through the port. The actual value depends on the port speed
if the configured values is greater than the current po… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.29 |
| esmPortAutoSpeed The automatically detected port line speed
of this ESM port. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.3 |
| esmPortIngressRateLimitEnable Enable/disable per port ingress traffic rate limit. When 'enable' value from
esmPortIngressRate object will be applicable to the ingressing traffic (BC, MC, UUC) if
the speed is g… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.30 |
| esmPortIngressRateLimit The value of the maximum ingress traffic that can flow
through the port. The actual value depends on the port speed
if the configured value is greater than the current port speed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.31 |
| esmPortIngressRateLimitBurst The value of ingress traffic burst size in Mbits. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.32 |
| esmPortEPPEnable use for port diagnostics | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.33 |
| esmPortEEEEnable 10Gbase-T Energy Efficent Ethernet port parameter. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.34 |
| esmPortIsFiberChannelCapable The port can be configured as Fiber Channel interface (yes) or can
not be configured as Fiber Channel interface. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.35 |
| esmPortBcastThresholdAction The port can be configured to send trap/shutdown if
the threshold limit is crossed for Bcast Frames | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.36 |
| esmPortMcastThresholdAction The port can be configured to send trap/shutdown if
the threshold limit is crossed for Mcast Frames | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.37 |
| esmPortUucastThresholdAction The port can be configured to send trap/shutdown if
the threshold limit is crossed Unknown Unicast Frames | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.38 |
| esmPortMinBcastRateLimit The value of low threshold for bcast. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.39 |
| esmPortAutoDuplexMode The automatically detected port duplex mode
of this ESM port.
Note: GigaEthernet supports only Full duplex mode.
Default value for 10/100 = Half duplex mode. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.4 |
| esmPortMinMcastRateLimit The value of low threshold for mcast. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.40 |
| esmPortMinUucastRateLimit The value of low threshold for uucast. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.41 |
| esmPortBcastStormState The state of the port for broadcast Storm Control. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.42 |
| esmPortMcastStormState The state of the port for multi-cast Storm Control. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.43 |
| esmPortUucastStormState The state of the port for uucast Storm Control. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.44 |
| esmPortCfgSpeed The configured port line speed of this ESM port. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.5 |
| esmPortCfgDuplexMode The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex. | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.6 |
| esmPortAdminStatus The desired state of the interface. The testing(3) state
indicates that no operational packets can be passed. When a
managed system initializes, all interfaces start with
ifAdmi… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.7 |
| esmPortLinkUpDownTrapEnable Indicates whether linkUp/linkDown traps should be generated
for this interface.
By default, this object should have the value enable(1) for
interfac… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.2.1.5.1.1.2.1.1.8 |