ADTRAN-GENIPSERVICES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
80

adGenIpVlanVcMapProfileTable

table
.1.3.6.1.4.1.664.6.10000.62.2.1 · 1 row entry · 48 columns
Open in standard view 
This table contains information on the VLAN mappings
in an ATM-oriented system (i.e., 'cross-connects'
between VLANs and VCLs).  One entry in this
table reflects a profile defined by a manager
which can be used to provision a VLAN-to-VCL
mapping.
adGenIpVlanVcMapProfileEntry entry .1.3.6.1.4.1.664.6.10000.62.2.1.1
Each entry corresponds to an Ethernet/VLAN-to-VCL
Mapping Profile. The ifIndex used here is the GigE ifIndex
associated with the DSL port of interest.
Indexes
IF-MIBifIndex adGenIpVlanVcVpi adGenIpVlanVcVci adGenIpVlanVcVID
Column Syntax OID
adGenIpVlanVcVpi
VPI for the VCL that is being mapped. May be
the same as atmVclVpi from atmVclTable in the ATM-MIB. The
current line of thought is that adGenIpVpi should NOT be
duplicated in atmVclTable. This implies that the agent wil…
ATM-TC-MIBAtmVpIdentifier
Textual Convention: ATM-TC-MIBAtmVpIdentifier Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.1
adGenIpVlanVcVci
VCI for the VCL that is being mapped. May be
the same as atmVclVci from atmVclTable in the ATM-MIB. The
current line of thought is that adGenIpVci should NOT be
duplicated in atmVclTable. This implies that the agent wil…
ATM-TC-MIBAtmVcIdentifier
Textual Convention: ATM-TC-MIBAtmVcIdentifier Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.2
adGenIpVlanVcVID
VLAN ID for the VLAN that is being mapped (see indexes above).
This VLAN ID is in the range (1..4095), and it is associated with the 'S-tag'.
If traffic is untagged, this value MUST be 4095, and adGenIpVlanVcCtagVID
(de…
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4095
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.3
adGenIpVlanVcMapProfileName
This object is provided so that the user can identify
the characteristics of the mapping between the specified
VLAN and VCL. The profile will be stored in the EMS by
name and applied to the user-specified VLAN(s) and VC…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.4
adGenIpVlanVcEncapsMode
Encapsulation mode/type if applicable; 'notApplicable' otherwise.
Note: pppoa(2) is for PPPoA LLC.
Enumerationr/w
Enumerated Values:
1ipoe
2pppoe
3pppoa
4notApplicable
5atmoe
6pppoaVcMux
7autoDetect
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.5
adGenIpVlanVcPBits
Priority bits, 0-7, where 0 is the highest priority.
This priority is associated with adGenIpVlanVcVID (the S-tag)
defined above. A value of 8 means inherit priority from
the CE VLAN.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.6
adGenIpVlanVcManualAddrAging
Manual Address Aging in minutes for PPPoE and DHCP.
Integer32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.7
adGenIpVlanVcPPPoERelay deprecated
Enable/disable PPPoE Relay if applicable; 'notApplicable' otherwise.
This object is deprecated and will be obsoleted in a future version of this mib.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.8
adGenIpVlanVcIntermedAgent
Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.9
adGenIpVlanVcDhcpRelay
Enable/disable DHCP Relay if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.10
adGenIpVlanVcOption82Insert
Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.11
adGenIpVlanVcLearnedIpAddrAgingMethod
Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1lease
2fixed
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.12
adGenIpVlanVcIgmpProcessing
Method for IGMP Processing if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1block
2forward
3snooping
4proxy
5notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.13
adGenIpVlanVcIgmpVersion
IGMP Version if applicable: v3 implies v1, v2, and v3;
v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1v1
2v2
3v3
4notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.14
adGenIpVlanVcLastMemberQueryInterval
Last Member Query Interval in milliseconds.
This is the amount of time between Queries. Low
value results in faster detection of missed leaves.
Integer32r/w
Constraints:
range: 100-1500
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.15
adGenIpVlanVcLastMemberQueryCount
Last Member Query Count. This is the number of
queries before declaring no membership of a group
(channel). Setting to 0 is the equivalent of setting
Immediate Leave to disabled.
Integer32r/w
Constraints:
range: 1-12
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.16
adGenIpVlanVcImmediateLeave
Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise.
Disable is the equivalent of setting Last Member Query Count to 0.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.17
adGenIpVlanVcMaxAllowedMcastSessions
Maximum Allowed Multicast Sessions.
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.18
adGenIpVlanVcL2L4Classifier
Layer 2 - Layer 4 Classifier to be used; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1ethertype
2protocolId
3reserved1
4reserved2
5notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.19
adGenIpVlanVcL2L4Value
Layer 2 - Layer 4 Value; should be displayed in hexadecimal format.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.20
adGenIpVlanVcMapProfileRowStatus
This object is used to create a new row or modify or
delete an existing row in this table. This object will
most likely be used to represent ..........
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.21
adGenIpVlanVcDhcpTrustedInterface
trusted/untrusted interface for DHCP Relay if applicable.
Enumerationr/w
Enumerated Values:
1trusted
2untrusted
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.22
adGenIpVlanVcDhcpPPPoERemoteId
Enable/disable Remote ID insertion into DHCP Option 82 or
PPPoE Vendor Specific tag if applicable.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.23
adGenIpVlanVcDhcpPPPoELoopCharacteristics
Enable/disable loop characteristics insertion into DHCP Option 82 or
PPPoE Vendor Specific tag if applicable.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.24
adGenIpVlanVcDhcpPPPoECircuitIdFormat
Used to provision the format of the circuit ID string. This
string is returned by the PPPoE intermediate agent and
DHCP relay agent in sub option 1. TR-101 states that the
format of the circuit ID should be user definea…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.25
adGenIpVlanVcPPPoASessionTimeout
Used to set the PPPoA Session timeout when the
mapping is provisioned for PPPoA encapsulation.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.26
adGenIpVlanVcCtagVID
This VLAN ID is in the range (1..4095), and it is associated with the 'C-tag'.
If traffic is untagged, this value MUST be 4095, and adGenIpVlanVcVID
(defined above) MUST also be set to 4095.
If traffic is single-tagged,…
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4095
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.27
adGenIpVlanVcCtagPbitsMethod
Method to be used to determine the Priority Bits value for
the C-tag if applicable. If the C-tag (adGenIpVlanVcCtagVID
defined above for double-tagged traffic) is to be used and
the method 'specifyFixedValue' is selecte…
Enumerationr/w
Enumerated Values:
1copyFromStag
2specifyFixedValue
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.28
adGenIpVlanVcCtagPbitsValue
Priority bits, 0-7, where 0 is the highest priority.
This priority is associated with adGenIpVlanVcCtagVID
(the C-tag) defined above.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.29
adGenIpVlanVcMulticastVlanVID
Used to set which VID carries multicast (IGMP)
traffic. If set to 4095, the separate multicast
Vlan VID is disabled.
Integer32r/w
Constraints:
range: 2-4095
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.30
adGenIpVlanVcMulticastVlanUpstreamPriority
Used to set the multicast upstream vlan priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.31
adGenIpVlanVcMulticastDownstreamVlanVID
Used to set the downstream VLAN ID. If set to 4095,
the downstream VID is disabled.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.32
adGenIpVlanVcDownstreamPolicer
Enable/disable Downstream Policer if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.33
adGenIpVlanVcDownstreamPolicerCIR
Used to set the Downstream Policer Committed Information Rate (CIR) in bps.
Not applicable if the Downstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.34
adGenIpVlanVcDownstreamPolicerCBS
Used to set the Downstream Policer Committed Burst Size (CBS) in bits.
Not applicable if the Downstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.35
adGenIpVlanVcDownstreamPolicerEIR
Used to set the Downstream Policer Excess Information Rate (EIR) in bps.
Not applicable if the Downstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.36
adGenIpVlanVcDownstreamPolicerEBS
Used to set the Downstream Policer Excess Burst Size (EBS) in bits.
Not applicable if the Downstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.37
adGenIpVlanVcUpstreamPolicer
Enable/disable Upstream Policer if applicable; 'notApplicable' otherwise.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3notApplicable
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.38
adGenIpVlanVcUpstreamPolicerCIR
Used to set the Upstream Policer Committed Information Rate (CIR) in bps.
Not applicable if the Upstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.39
adGenIpVlanVcUpstreamPolicerCBS
Used to set the Upstream Policer Committed Burst Size (CBS) in bits.
Not applicable if the Upstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.40
adGenIpVlanVcUpstreamPolicerEIR
Used to set the Upstream Policer Excess Information Rate (EIR) in bps.
Not applicable if the Upstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.41
adGenIpVlanVcUpstreamPolicerEBS
Used to set the Upstream Policer Excess Burst Size (EBS) in bits.
Not applicable if the Upstream Policer is disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.42
adGenIpVlanVcMCastSessionControlStartIP
The first Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.43
adGenIpVlanVcMCastSessionControlEndIP
The last Multicast IP Address in a range of IP addresses
that are used by the Multicast Session Control.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.44
adGenIpVlanVcMCastSessionControlBitrate
Used to set the bitrate associated with the multicast IP address range
of the Multicast Session Control.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.45
adGenIpVlanVcPolicerStatus
String description of the error that occurred as a result of
the last set to adGenIpVlanVcDownstreamPolicer or adGenIpVlanVcUpstreamPolicer.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.46
adGenIpVlanVcUpstreamMACDAFilter
This item defines how upstream traffic is filtered on MAC DA.
gatewayMACOnly - indicates that upstream traffic is forwarded to the network only
if uses the gateway MAC as the DA.
allowAllValidMACs - indicates th…
Enumerationr/w
Enumerated Values:
1gatewayMACOnly
2allowAllValidMACs
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.47
adGenIpVlanVcIgmpRouterIP
The source IP address that the DSLAM places in IGMP messages destined
for the subscriber. This value only applies when IGMP is in proxy mode.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.6.10000.62.2.1.1.48

adGenIpPortProfileTable

table
.1.3.6.1.4.1.664.6.10000.62.2.2 · 1 row entry · 21 columns
Open in standard view 
This table contains information on the port profiles.
One entry in this table reflects a profile defined by a
manager which can be used to provision a port for IP
services.
adGenIpPortProfileEntry entry .1.3.6.1.4.1.664.6.10000.62.2.2.1
Each entry corresponds to a Port Profile. The ifIndex used
here is the GigE ifIndex associated with the DSL/customer port
of interest.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenIpPortProfileName
This object is provided to assist the user in identifying
the characteristics of the port profile by name. The
profile will be stored in the EMS by name and applied
to the user-specified port(s)/ifIndex(es). This
profil…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.1
adGenIpPortNetTrafficTags
Network Traffic Tagging options. Note: no tags for flat network .
Enumerationr/w
Enumerated Values:
1noTags
2singleTagged
3doubleTagged
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.2
adGenIpPortNetworkModel
This is the Network Model, also referred to as VC/VLAN
Classification.
Enumerationr/w
Enumerated Values:
1vlanPerServicePvcPerService
2vlanPerSubscriberPvcPerService
3vlanPerServiceSinglePvc
4vlanPerSubscriberSinglePvc
5noVlanTagsSinglePvc
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.3
adGenIpPortSTagVID
S-Tag VLAN ID in the range (1..4094).
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4095
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.4
adGenIpPortSTagPBitsMethod
S-Tag Priority Bits Method. If 'specifyFixedValue' is to be used,
see also adGenIpSTagPBitsValue.
Enumerationr/w
Enumerated Values:
1copyFromCTag
2specifyFixedValue
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.5
adGenIpPortSTagPBitsValue
S-Tag Priority Bits Value if 'specifyFixedValue' is to be used.
See also adGenIpSTagPBitsMethod. Priority bits range is 0-7, where
0 is the highest priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.6
adGenIpPortMaxMacAddr
The total (maximum) number of Learned/Dynamic MAC
addresses plus Learned-and-Locked MAC addresses.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.7
adGenIpPortLearnAndLockAddr
Enable/disable Learn-and-Lock feature for MAC addresses. If
'disabled' is set, then Learned/Dynamic method is implied.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.8
adGenIpPortIgmpLimit
IGMP Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.9
adGenIpPortIgmpLockout
IGMP Violation Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.10
adGenIpPortArpLimit
ARP Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.11
adGenIpPortArpLockout
ARP Violation Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.12
adGenIpPortDhcpLimit
DHCP Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.13
adGenIpPortDhcpLockout
DHCP Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.14
adGenIpPortPppoeLimit
PPPoE Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.15
adGenIpPortPppoeLockout
PPPoE Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.16
adGenIpPortMcastBcastLimit
Multicast/Broadcast Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.17
adGenIpPortMcastBcastLockout
Multicast/Broadcast Violation Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.18
adGenIpPortUcastExceptionLimit
Unicast Exception Limit in frames/sec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.19
adGenIpPortUcastExceptionLockout
Unicast Exception Violation Lockout in minutes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.20
adGenIpPortProfileRowStatus
This type of object is normally used to create a new row or
modify or delete an existing row in the table with which it
is associated. A profile is activated by setting this object
to`active'. When `active' is set, the…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.6.10000.62.2.2.1.21

adGenIpVlanPropertiesTable

table
.1.3.6.1.4.1.664.6.10000.62.2.4 · 1 row entry · 1 columns
Open in standard view 
This table contains information on properties, such as
name, of the specified VLAN.
adGenIpVlanPropertiesEntry entry .1.3.6.1.4.1.664.6.10000.62.2.4.1
The index used is the VID of the VLAN of interest.
Indexes
adGenIpVlanVcVID
Column Syntax OID
adGenIpVlanPropName
Name associated with the specified VLAN.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.6.10000.62.2.4.1.1

adGenIpSysProvTable

table
.1.3.6.1.4.1.664.6.10000.62.2.5 · 1 row entry · 8 columns
Open in standard view 
This table contains provisioning variables for the system.
adGenIpSysProvEntry entry .1.3.6.1.4.1.664.6.10000.62.2.5.1
The index used is the slot number of the active switch module.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenIpSysProvMgmtVID
The Management VLAN ID for this system. The index is the slot
number of the switch module. Management VID = 0 implies no
tagging; however, also see adGenIpSysMgmtTagEnable which is
the master variable for enabling taggi…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.1
adGenIpSysProvMgmtTagEnable
Enable/disable the switch module to receive and transmit tagged
(as opposed to untagged) traffic on the Management VLAN.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.2
adGenIpSysProvMgmtPBits
Priority bits, 0-7, where 0 is the highest priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.3
adGenIpSysProvMacAgingTimeout
Time limit (in seconds) for keeping MAC addresses while
in MAC aging mode. If this limit is set to zero, the mode of
operation is learn-and-lock.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.5
adGenIpSysProvIgmpVID
The IGMP VLAN ID for this system. The index is the slot
number of the switch module. IGMP VID = 0 implies no
tagging; however, also see adGenIpSysIgmpTagEnable which is
the master variable for enabling tagging.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.6
adGenIpSysProvIgmpTagEnable
Enable/disable the switch module to receive and transmit tagged
(as opposed to untagged) traffic on the IGMP VLAN.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.7
adGenIpSysProvIgmpPBits
Priority bits, 0-7, where 0 is the highest priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.8
adGenIpSysProvIgmpHostIP
The IGMP Host IP address for this system. The index is the slot
number of the switch module.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.664.6.10000.62.2.5.1.9

adGenIpVlanAndPortProvTable

table
.1.3.6.1.4.1.664.6.10000.62.2.6 · 1 row entry · 1 columns
Open in standard view 
This table contains provisioning (row status) for VLAN membership.
adGenIpVlanAndPortProvEntry entry .1.3.6.1.4.1.664.6.10000.62.2.6.1
...
Indexes
adGenIpVlanVcVID IF-MIBifIndex
Column Syntax OID
adGenIpAccessPortVlanMemRowStatus
This object is used to create a new row or to modify or
delete an existing row in this table. This object, by the
definition of its indexes, represents the membership of
the specified port (ifIndex) to the specified VL…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.6.10000.62.2.6.1.1

adGenIpVlanAndPortStatusTable

table
.1.3.6.1.4.1.664.6.10000.62.3.2 · 1 row entry · 1 columns
Open in standard view 
This table contains status information on VLAN membership.
adGenIpVlanAndPortStatusEntry entry .1.3.6.1.4.1.664.6.10000.62.3.2.1
...
Indexes
IF-MIBifIndex adGenIpVlanVcVID
Column Syntax OID
adGenIpConfVlanMapping
This variable is indexed by the ifIndex of the GigE port on the
'backplane' of the card (e.g., the TA1148, the TA5000 ADSL card,
etc.) and the VID of interest. The counter is incremented once for
every mapping that is c…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.6.10000.62.3.2.1.2