adGenIpVlanVcEncapsMode

ADTRAN-GENIPSERVICES-MIB · .1.3.6.1.4.1.664.6.10000.62.2.1.1.5
MIB view Table view

Object

column r/w Enumeration 
Encapsulation mode/type if applicable; 'notApplicable' otherwise.
Note: pppoa(2) is for PPPoA LLC.

Context

MIB
ADTRAN-GENIPSERVICES-MIB
OID
.1.3.6.1.4.1.664.6.10000.62.2.1.1.5
Type
column
Access
readwrite
Status
current
Parent
adGenIpVlanVcMapProfileEntry
Table
adGenIpVlanVcMapProfileTable
Siblings
47

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ipoe
2pppoe
3pppoa
4notApplicable
5atmoe
6pppoaVcMux
7autoDetect

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenIpVlanVcVpi
VPI for the VCL that is being mapped. May be the same as atmVclVpi from atmVclTable in the ATM-MIB. The current line of thought is that adGenIpVpi should NOT be duplicated in atmV…
columnATM-TC-MIBAtmVpIdentifier.1.3.6.1.4.1.664.6.10000.62.2.1.1.1
adGenIpVlanVcDhcpRelay
Enable/disable DHCP Relay if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.10
adGenIpVlanVcOption82Insert
Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.11
adGenIpVlanVcLearnedIpAddrAgingMethod
Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.12
adGenIpVlanVcIgmpProcessing
Method for IGMP Processing if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.13
adGenIpVlanVcIgmpVersion
IGMP Version if applicable: v3 implies v1, v2, and v3; v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.14
adGenIpVlanVcLastMemberQueryInterval
Last Member Query Interval in milliseconds. This is the amount of time between Queries. Low value results in faster detection of missed leaves.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.15
adGenIpVlanVcLastMemberQueryCount
Last Member Query Count. This is the number of queries before declaring no membership of a group (channel). Setting to 0 is the equivalent of setting Immediate Leave to disabled.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.16
adGenIpVlanVcImmediateLeave
Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise. Disable is the equivalent of setting Last Member Query Count to 0.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.17
adGenIpVlanVcMaxAllowedMcastSessions
Maximum Allowed Multicast Sessions.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.18
adGenIpVlanVcL2L4Classifier
Layer 2 - Layer 4 Classifier to be used; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.19
adGenIpVlanVcVci
VCI for the VCL that is being mapped. May be the same as atmVclVci from atmVclTable in the ATM-MIB. The current line of thought is that adGenIpVci should NOT be duplicated in atmV…
columnATM-TC-MIBAtmVcIdentifier.1.3.6.1.4.1.664.6.10000.62.2.1.1.2
adGenIpVlanVcL2L4Value
Layer 2 - Layer 4 Value; should be displayed in hexadecimal format.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.20
adGenIpVlanVcMapProfileRowStatus
This object is used to create a new row or modify or delete an existing row in this table. This object will most likely be used to represent ..........
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.664.6.10000.62.2.1.1.21
adGenIpVlanVcDhcpTrustedInterface
trusted/untrusted interface for DHCP Relay if applicable.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.22
adGenIpVlanVcDhcpPPPoERemoteId
Enable/disable Remote ID insertion into DHCP Option 82 or PPPoE Vendor Specific tag if applicable.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.23
adGenIpVlanVcDhcpPPPoELoopCharacteristics
Enable/disable loop characteristics insertion into DHCP Option 82 or PPPoE Vendor Specific tag if applicable.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.24
adGenIpVlanVcDhcpPPPoECircuitIdFormat
Used to provision the format of the circuit ID string. This string is returned by the PPPoE intermediate agent and DHCP relay agent in sub option 1. TR-101 states that the format …
columnOctetString.1.3.6.1.4.1.664.6.10000.62.2.1.1.25
adGenIpVlanVcPPPoASessionTimeout
Used to set the PPPoA Session timeout when the mapping is provisioned for PPPoA encapsulation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.26
adGenIpVlanVcCtagVID
This VLAN ID is in the range (1..4095), and it is associated with the 'C-tag'. If traffic is untagged, this value MUST be 4095, and adGenIpVlanVcVID (defined above) MUST also be s…
columnVlanId.1.3.6.1.4.1.664.6.10000.62.2.1.1.27
adGenIpVlanVcCtagPbitsMethod
Method to be used to determine the Priority Bits value for the C-tag if applicable. If the C-tag (adGenIpVlanVcCtagVID defined above for double-tagged traffic) is to be used and t…
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.28
adGenIpVlanVcCtagPbitsValue
Priority bits, 0-7, where 0 is the highest priority. This priority is associated with adGenIpVlanVcCtagVID (the C-tag) defined above.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.29
adGenIpVlanVcVID
VLAN ID for the VLAN that is being mapped (see indexes above). This VLAN ID is in the range (1..4095), and it is associated with the 'S-tag'. If traffic is untagged, this value MU…
columnVlanId.1.3.6.1.4.1.664.6.10000.62.2.1.1.3
adGenIpVlanVcMulticastVlanVID
Used to set which VID carries multicast (IGMP) traffic. If set to 4095, the separate multicast Vlan VID is disabled.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.30
adGenIpVlanVcMulticastVlanUpstreamPriority
Used to set the multicast upstream vlan priority.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.31
adGenIpVlanVcMulticastDownstreamVlanVID
Used to set the downstream VLAN ID. If set to 4095, the downstream VID is disabled.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.32
adGenIpVlanVcDownstreamPolicer
Enable/disable Downstream Policer if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.33
adGenIpVlanVcDownstreamPolicerCIR
Used to set the Downstream Policer Committed Information Rate (CIR) in bps. Not applicable if the Downstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.34
adGenIpVlanVcDownstreamPolicerCBS
Used to set the Downstream Policer Committed Burst Size (CBS) in bits. Not applicable if the Downstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.35
adGenIpVlanVcDownstreamPolicerEIR
Used to set the Downstream Policer Excess Information Rate (EIR) in bps. Not applicable if the Downstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.36
adGenIpVlanVcDownstreamPolicerEBS
Used to set the Downstream Policer Excess Burst Size (EBS) in bits. Not applicable if the Downstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.37
adGenIpVlanVcUpstreamPolicer
Enable/disable Upstream Policer if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.38
adGenIpVlanVcUpstreamPolicerCIR
Used to set the Upstream Policer Committed Information Rate (CIR) in bps. Not applicable if the Upstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.39
adGenIpVlanVcMapProfileName
This object is provided so that the user can identify the characteristics of the mapping between the specified VLAN and VCL. The profile will be stored in the EMS by name and appl…
columnOctetString.1.3.6.1.4.1.664.6.10000.62.2.1.1.4
adGenIpVlanVcUpstreamPolicerCBS
Used to set the Upstream Policer Committed Burst Size (CBS) in bits. Not applicable if the Upstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.40
adGenIpVlanVcUpstreamPolicerEIR
Used to set the Upstream Policer Excess Information Rate (EIR) in bps. Not applicable if the Upstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.41
adGenIpVlanVcUpstreamPolicerEBS
Used to set the Upstream Policer Excess Burst Size (EBS) in bits. Not applicable if the Upstream Policer is disabled.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.42
adGenIpVlanVcMCastSessionControlStartIP
The first Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.6.10000.62.2.1.1.43
adGenIpVlanVcMCastSessionControlEndIP
The last Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.6.10000.62.2.1.1.44
adGenIpVlanVcMCastSessionControlBitrate
Used to set the bitrate associated with the multicast IP address range of the Multicast Session Control.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.45
adGenIpVlanVcPolicerStatus
String description of the error that occurred as a result of the last set to adGenIpVlanVcDownstreamPolicer or adGenIpVlanVcUpstreamPolicer.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.6.10000.62.2.1.1.46
adGenIpVlanVcUpstreamMACDAFilter
This item defines how upstream traffic is filtered on MAC DA. gatewayMACOnly - indicates that upstream traffic is forwarded to the network only if uses the gateway MAC as …
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.47
adGenIpVlanVcIgmpRouterIP
The source IP address that the DSLAM places in IGMP messages destined for the subscriber. This value only applies when IGMP is in proxy mode.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.6.10000.62.2.1.1.48
adGenIpVlanVcPBits
Priority bits, 0-7, where 0 is the highest priority. This priority is associated with adGenIpVlanVcVID (the S-tag) defined above. A value of 8 means inherit priority from the …
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.6
adGenIpVlanVcManualAddrAging
Manual Address Aging in minutes for PPPoE and DHCP.
columnInteger32.1.3.6.1.4.1.664.6.10000.62.2.1.1.7
adGenIpVlanVcPPPoERelay deprecated
Enable/disable PPPoE Relay if applicable; 'notApplicable' otherwise. This object is deprecated and will be obsoleted in a future version of this mib.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.8
adGenIpVlanVcIntermedAgent
Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.
columnEnumeration.1.3.6.1.4.1.664.6.10000.62.2.1.1.9