ADTRAN-GENERIC-VECTORING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
49

adGenVectorModuleConfTable

table
.1.3.6.1.4.1.664.5.70.57.1.1 · 1 row entry · 7 columns
Open in standard view 
This table contains global vectoring configuration
parameters, per populated card slot.
adGenVectorModuleConfEntry entry .1.3.6.1.4.1.664.5.70.57.1.1.1
This list contains vector limits per module .
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenVectorModuleConfSupportedVectorModeTypes
Indicates the vectoring modes in which the card is capable of participating.
AdGenVectorMode
Textual Convention: AdGenVectorMode Enumeration
Type Values:
1blv
2slv
3both
4none
5dlv
7blv-dlv-slv
 .1.3.6.1.4.1.664.5.70.57.1.1.1.1
adGenVectorModuleConfMaxBLVGroups
The maximum number of Board-Level vectoring groups the module can support.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.1.1.2
adGenVectorModuleConfMaxSLVGroups
The maximum number of System-Level vectoring groups the module can support.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.1.1.3
adGenVectorModuleConfMaxPhysPerSLVGroup
The maximum number of physical ports available per System-Level vectoring group.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.1.1.4
adGenVectorModuleConfNumPhys
The number of physical ports available for vectoring on the given slot.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.1.1.5
adGenVectorModuleConfVectorEngineHwRev
The hardware revision of the vectoring engine chip set.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.1.1.6
adGenVectorModuleConfVectorEngineSwRev
The software revision of the vectoring engine chip set.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.1.1.7

adGenVectorGroupTable

table
.1.3.6.1.4.1.664.5.70.57.1.3 · 1 row entry · 10 columns
Open in standard view 
The Vectoring Group Table.  A unique group is created for each
unique set of physical ports that will be independently vectored.
adGenVectorGroupEntry entry .1.3.6.1.4.1.664.5.70.57.1.3.1
An entry in the Vectoring Group table.
Indexes
adGenVectorGroupIfIndex
Column Syntax OID
adGenVectorGroupIfIndex
The ifIndex value of the interface associated
with this Vectoring Group. The IANA type should be linegroup (210).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.3.1.1
adGenVectorGroupDescription
The textual name given to this group.
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.664.5.70.57.1.3.1.2
adGenVectorGroupLastError
The string describing the last error experienced.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.3.1.3
adGenVectorGroupBandPlan
The superset band plan for the vectoring group.
An individual port in the vectoring group must
be a subset of the group's band plan.
Valid options listed below:
g998 (1) -- Annex A (EU32)
g998e (2) …
AdGenVectorGroupBandPlansr/w
Textual Convention: AdGenVectorGroupBandPlans Enumeration
Type Values:
1g998
2g998e
3g998ade
4g997
5g997e
6hpe
 .1.3.6.1.4.1.664.5.70.57.1.3.1.4
adGenVectorGroupRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. Setting this value to 'active'
indicates that the vectoring group is administratively In-Service.
Setting this value to 'inactiv…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.57.1.3.1.5
adGenVectorGroupFallbackMode
The vectoring group fallback mode determines port behavior
during misconfiguration and system failure events.
Valid options listed below:
adsl2-multimode (1) -- DEPRECATED, this value will change the mode to adsl2…
AdGenVectorGroupFallbackModesr/w
Textual Convention: AdGenVectorGroupFallbackModes Enumeration
Type Values:
1adsl2-multimode
2shutdown
3adsl2
4non-vectored
 .1.3.6.1.4.1.664.5.70.57.1.3.1.6
adGenVectorGroupFallbackAlarmSeverity
Sets the severity for adGenVectorAlarmsForcedFallbackAlarm. This severity
applies to the entire group, which may span several slots.
Valid options listed below:
critical (0)
major (1)
minor (2)
…
Enumerationr/w
Enumerated Values:
0critical
1major
2minor
3alert
4info
 .1.3.6.1.4.1.664.5.70.57.1.3.1.7
adGenVectorGroupFallbackAlarmEnable
Controls whether the adGenVectorAlarmsForcedFallback alarm is
generated when the alarm condition is active. This selection
applies to the entire group, which may span several slots.
Valid options listed below:
disab…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.664.5.70.57.1.3.1.8
adGenVectorGroupVectoringMode
Controls the vectoring mode in which the card is currently operating.
Valid options listed below:
blv (1) -- Board Level Vectoring is vectoring of physical ports on a single board.
slv (2) -- System Level …
AdGenVectorModer/w
Textual Convention: AdGenVectorMode Enumeration
Type Values:
1blv
2slv
3both
4none
5dlv
7blv-dlv-slv
 .1.3.6.1.4.1.664.5.70.57.1.3.1.9
adGenVectorGroupAutoAddEnable
Controls whether a slot is automatically added to a System Level vecotoring group when
Inserted into a shelf:
disable (0) -- auto add disabled
enable (1) -- auto add enabled
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.664.5.70.57.1.3.1.10

adGenVectorPhyMapTable

table
.1.3.6.1.4.1.664.5.70.57.1.5 · 1 row entry · 5 columns
Open in standard view 
Row creation adds/maps the physical port to a vectoring group.
adGenVectorPhyMapEntry entry .1.3.6.1.4.1.664.5.70.57.1.5.1
An entry in the Phy Map table.
This entry is represents one port that
is associated with a vectoring group.
Indexes
adGenVectorPhyMapGroupIfIndex adGenVectorPhyMapPhyIfIndex
Column Syntax OID
adGenVectorPhyMapGroupIfIndex
The ifIndex value of the vectoring group to which the physical port
is mapped.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.5.1.1
adGenVectorPhyMapPhyIfIndex
The ifIndex value of the physical port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.5.1.2
adGenVectorPhyMapLastChange
The value of sysUpTime at the time this
Group-Phy mapping entered its current operational state.
AdGenVectorLastChange
Textual Convention: AdGenVectorLastChange Unsigned32
 .1.3.6.1.4.1.664.5.70.57.1.5.1.3
adGenVectorPhyMapLastError
The string describing the last error experienced.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.5.1.4
adGenVectorPhyMapRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. Creating a row adds the
Phy to the Group. Setting this value to 'active'
indicates that the Group-Phy mapping is
administrativel…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.57.1.5.1.5

adGenVectorGroupStatusTable

table
.1.3.6.1.4.1.664.5.70.57.1.6 · 1 row entry · 10 columns
Open in standard view 
The Vectoring Group Status Table displays the status of
each vectoring group.
adGenVectorGroupStatusEntry entry .1.3.6.1.4.1.664.5.70.57.1.6.1
An entry in the Vectoring Group table.
Indexes
adGenVectorGroupStatusIfIndex
Column Syntax OID
adGenVectorGroupStatusIfIndex
The ifIndex value of the interface associated
with this Vectoring Group. The IANA type should be linegroup (210).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.1
adGenVectorGroupStatusNumProvisionedPorts
The number of ports assigned to this vectoring group.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.2
adGenVectorGroupStatusNumVectoredPorts
The number of ports assigned to this vectoring group
that are trained and being vectored (g993.5).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.3
adGenVectorGroupStatusNumUntrainedPorts deprecated
The number of ports assigned to this vectoring group
that are not currently trained.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.4
adGenVectorGroupStatusNumVectorFriendlyPorts
The number of ports assigned to this vectoring group that
are trained and are vectoring friendly (g993.2 annex y).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.5
adGenVectorGroupStatusNumNonVectoredPorts
The number of ports assigned to this vectoring group
that are trained and are not vectored.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.6
adGenVectorGroupStatusNumLegacyPorts
The number of ports assigned to this vectoring group
that are trained with a legacy VDSL2 modem that does not
support vectoring.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.7
adGenVectorGroupStatusOperStatus
The current operational status of the vectoring group.
AdGenVectorGroupOperStatus
Textual Convention: AdGenVectorGroupOperStatus Enumeration
Type Values:
1up
2down
3upPartial
 .1.3.6.1.4.1.664.5.70.57.1.6.1.8
adGenVectorGroupStatusReset
A SET clears the status information for each interface
in the specified group.
A GET will always return a one (1).
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.57.1.6.1.9
adGenVectorGroupStatusNumFallbackPorts
The number of ports assigned to this vectoring group
that have been forced into the fallback mode specified by
adGenVectorGroupFallbackMode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.6.1.10

adGenVectorPhyStatusTable

table
.1.3.6.1.4.1.664.5.70.57.1.7 · 1 row entry · 8 columns
Open in standard view 
Displays the status of the available physical ports in the system,
including the group, if any, a physical port is associated with.
It also indicates the installed status of a certain physical port
along with the type of group to which the physical port is installed.
adGenVectorPhyStatusEntry entry .1.3.6.1.4.1.664.5.70.57.1.7.1
An entry in the Physical Port Status table.
This entry represents one physical port.
Indexes
adGenVectorPhyStatusPhyIfIndex
Column Syntax OID
adGenVectorPhyStatusPhyIfIndex
The ifIndex value of the physical link. IANA type is propVirtual(53).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.7.1.1
adGenVectorPhyStatusGroupIfIndex
The ifIndex value of the Group of which this
physical link belongs. A value of '0' indicates
that the link is currently not mapped to any
Group. IANA type is linegroup(210).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.1.7.1.2
adGenVectorPhyStatusGroupType
Indicates this physical port's vectoring group type, if any.
AdGenVectorMode
Textual Convention: AdGenVectorMode Enumeration
Type Values:
1blv
2slv
3both
4none
5dlv
7blv-dlv-slv
 .1.3.6.1.4.1.664.5.70.57.1.7.1.3
adGenVectorPhyStatusPortLineState deprecated
The line state of the physical port.
AdGenVectorPhyLineState
Textual Convention: AdGenVectorPhyLineState Enumeration
Type Values:
0notAvailable
1down
2train
3up
4deltActive
5deltDataExchange
6deltDataRequest
7deltComplete
8seltActive
9seltDataRequest
10seltComplete
 .1.3.6.1.4.1.664.5.70.57.1.7.1.4
adGenVectorPhyStatusPortVectoringState
The vectoring state of a physical port. The ff
suffix designates vectoring friendly states.
AdGenVectorPhyPortVectoringState
Textual Convention: AdGenVectorPhyPortVectoringState Enumeration
Type Values:
0idle
1dsInit-1-0
2dsInit-2-1
3usInit-1
4usInit-2
5steady
6trans
7waitForStart
8dsInit-1-1
9dsInit-2-0
10reset
11nonVectoring
12handshake
13waitForStart-Legacy
14init-Legacy
15steady-Legacy
16steadyB
17stopPending
18idle-FF
19dsInit-1-0-ff
20dsInit-2-1-ff
21usInit-1-ff
22usInit-2-ff
23steady-ff
24trans-ff
25waitForStart-ff
26dsInit-1-1-ff
27dsInit-2-0-ff
28steadyB-ff
29stopPending-ff
30unknown
31fallback
 .1.3.6.1.4.1.664.5.70.57.1.7.1.5
adGenVectorPhyStatusVectoringError
The last error received in relation to the physical port.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.7.1.6
adGenVectorPhyStatusVectoringErrorTimestamp
The card uptime when the last physical port error occurred.
If no error has occurred, this value will be zero.
secondsAdGenVectorPhyPortErrorTimestamp
Textual Convention: AdGenVectorPhyPortErrorTimestamp Unsigned32
 .1.3.6.1.4.1.664.5.70.57.1.7.1.7
adGenVectorPhyStatusVectoringErrorDateTime
Date/time string in format yyyy.MM.dd HH:mm of the last
physical port error. If no error has occurred, the value will be N/A.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.57.1.7.1.8

adGenVectorSlotConfTable

table
.1.3.6.1.4.1.664.5.70.57.1.9 · 1 row entry · 1 columns
Open in standard view 
Table contains slot based vectoring configuration items
adGenVectorSlotConfEntry entry .1.3.6.1.4.1.664.5.70.57.1.9.1
Each entry can be applied per vectored slot.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenVectorSlotConfForceFallback
Used to manually force slot into or out of vectoring fallback mode.
A read will always return allowVectoring (2)
Enumerationr/w
Enumerated Values:
1forceSlotFallback
2allowVectoring
 .1.3.6.1.4.1.664.5.70.57.1.9.1.1

adGenVectorSlotStatusTable

table
.1.3.6.1.4.1.664.5.70.57.1.10 · 1 row entry · 1 columns
Open in standard view 
Table contains slot based vectoring status items
adGenVectorSlotStatusEntry entry .1.3.6.1.4.1.664.5.70.57.1.10.1
Each entry can be read per vectored slot
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenVectorSlotStatusFallbackState
Used to query the slot fallback state.
Enumeration
Enumerated Values:
1fallbackActive
2fallbackInactive
 .1.3.6.1.4.1.664.5.70.57.1.10.1.1

adGenVectorBulkInstanceTable

table
.1.3.6.1.4.1.664.5.70.57.2.1 · 1 row entry · 1 columns
Open in standard view 
Table contains instances that are created when there is a request to reserve a bulk vector instance
adGenVectorBulkInstanceEntry entry .1.3.6.1.4.1.664.5.70.57.2.1.1
Index is the slot number.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenVectorBulkReserveSlotInstance
Used to index the TLV table; Each time this is called by slot it
creates an instance for that viewer. Once an instance is created, it may
be found by doing a get on adTa5kTlvBySlotInstance with the instance
number
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.2.1.1.1

adGenVectorBulkFilterTable

table
.1.3.6.1.4.1.664.5.70.57.2.2 · 1 row entry · 6 columns
Open in standard view 
Table contains filters that can be applied on the requested instance
adGenVectorBulkFilterEntry entry .1.3.6.1.4.1.664.5.70.57.2.2.1
Indexes are the vector group status index and instance number
Indexes
adGenVectorGroupStatusIfIndex adGenVectorBulkFilterInstance
Column Syntax OID
adGenVectorBulkFilterInstance
Used to index the table by TLV Instance number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.2.2.1.1
adGenVectorBulkFilterInterface
Used to set the vector group filter for a specific bulk vector instance of the Tlv table.
The interface ID passed here will be the SNMP interface ID.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.57.2.2.1.2
adGenVectorBulkFilterSlot
Used to set the slot of bulk vector info to return in the bulk vector instance
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.70.57.2.2.1.3
adGenVectorBulkFilterDirection
Used to set the direction of bulk vector info to return in the bulk vector instance:
1 - Upstream Direction, 2 - Downstream direction
Enumerationr/w
Enumerated Values:
1upstream
2downstream
 .1.3.6.1.4.1.664.5.70.57.2.2.1.4
adGenVectorBulkFilterType
Used to set the type of bulk vector info to return in the bulk vector instance:
1 - weights
Enumerationr/w
Enumerated Values:
1weights
 .1.3.6.1.4.1.664.5.70.57.2.2.1.5
adGenVectorBulkSlotCreate
Set this OID to 1 to update the instance with bulk vector info depending on filters.
A get on this OID always returns a 1.
Enumerationr/w
Enumerated Values:
1updateinstance
 .1.3.6.1.4.1.664.5.70.57.2.2.1.6