adGenVectorGroupBandPlan
ADTRAN-GENERIC-VECTORING-MIB ·
.1.3.6.1.4.1.664.5.70.57.1.3.1.4
Object
column
r/w
AdGenVectorGroupBandPlans
The superset band plan for the vectoring group.
An individual port in the vectoring group must
be a subset of the group's band plan.
Valid options listed below:
g998 (1) -- Annex A (EU32)
g998e (2) -- G.998 Extension
g998ade (3) -- G.998 Annex A Direct Extension
g997 (4) -- G.997 (not supported)
g997e (5) -- G.997 Extension
hpe (6) -- Hybrid Partial Extension
Context
- MIB
- ADTRAN-GENERIC-VECTORING-MIB
- OID
.1.3.6.1.4.1.664.5.70.57.1.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenVectorGroupEntry
- Table
- adGenVectorGroupTable
- Siblings
- 9
Syntax
AdGenVectorGroupBandPlans
- Source
- AdGenVectorGroupBandPlans
- Base type
Enumeration
Values & Constraints
Type Values
1 | g998 |
2 | g998e |
3 | g998ade |
4 | g997 |
5 | g997e |
6 | hpe |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenVectorGroupIfIndex The ifIndex value of the interface associated
with this Vectoring Group. The IANA type should be linegroup (210). | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.664.5.70.57.1.3.1.1 |
| adGenVectorGroupAutoAddEnable Controls whether a slot is automatically added to a System Level vecotoring group when
Inserted into a shelf:
disable (0) -- auto add disabled
enable (1) -- aut… | column | Enumeration | .1.3.6.1.4.1.664.5.70.57.1.3.1.10 |
| adGenVectorGroupDescription The textual name given to this group. | column | OctetString | .1.3.6.1.4.1.664.5.70.57.1.3.1.2 |
| adGenVectorGroupLastError The string describing the last error experienced. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.57.1.3.1.3 |
| adGenVectorGroupRowStatus This object is used to create a new row or modify or delete an
existing row in this table. Setting this value to 'active'
indicates that the vectoring group is administratively In… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.70.57.1.3.1.5 |
| adGenVectorGroupFallbackMode The vectoring group fallback mode determines port behavior
during misconfiguration and system failure events.
Valid options listed below:
adsl2-multimode (1) -- DEPRECATED, … | column | AdGenVectorGroupFallbackModes | .1.3.6.1.4.1.664.5.70.57.1.3.1.6 |
| adGenVectorGroupFallbackAlarmSeverity Sets the severity for adGenVectorAlarmsForcedFallbackAlarm. This severity
applies to the entire group, which may span several slots.
Valid options listed below:
critical (0)
… | column | Enumeration | .1.3.6.1.4.1.664.5.70.57.1.3.1.7 |
| adGenVectorGroupFallbackAlarmEnable Controls whether the adGenVectorAlarmsForcedFallback alarm is
generated when the alarm condition is active. This selection
applies to the entire group, which may span several slot… | column | Enumeration | .1.3.6.1.4.1.664.5.70.57.1.3.1.8 |
| adGenVectorGroupVectoringMode Controls the vectoring mode in which the card is currently operating.
Valid options listed below:
blv (1) -- Board Level Vectoring is vectoring of physical ports on a singl… | column | AdGenVectorMode | .1.3.6.1.4.1.664.5.70.57.1.3.1.9 |