ADTRAN-GEN-SELTDELT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
adGenSeltDeltTable
table.1.3.6.1.4.1.664.5.73.1.1.1
·
1 row entry
·
10 columns
This table contains information on the XDSL generic SELT / DELT feature. Each entry reflects a required parameter or action required to perform either the SELT or DELT diagnostic test.
This table contains information on the SELT / DELT feature.
The entries are used for SELT / DELT support and operation.
The entries are used for SELT / DELT support and operation.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adGenSeltDeltTestPortNumber
Selected port number for test operation.
The valid range is 0 up to the number of ports on the card. This is functionally equivalent to the port number of the selected interface. Note: adGenSeltDeltTestR… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.664.5.73.1.1.1.1.1 |
||||||||||
|
adGenSeltDeltTestFilename
Name of the file to be transmitted via TFTP
containing all of the test data for the selected interface. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.73.1.1.1.1.2 |
||||||||||
|
adGenSeltDeltStartSELTTest
Used to initiate the SELT test for the xDSL port. When
the SELT test has completed the data file can be transferred to a server via TFTP using adGenSeltDeltRetrieveData. The TFTP address of the server will be specified… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.73.1.1.1.1.3 |
||||||||||
|
adGenSeltDeltStartDELTTest
Used to initiate the DELT test for the xDSL port. When
the DELT test has completed the data file can be transferred to a server via TFTP using adGenSeltDeltRetrieveData. The TFTP address of the server will be specified… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.73.1.1.1.1.4 |
||||||||||
|
adGenSeltDeltStopTest
Used to terminate the currently active test.
A get is meaningless and will always return stop(1). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.73.1.1.1.1.5 |
||||||||||
|
adGenSeltDeltCurrentTestStatus
Status of the currently active SELT or DELT test.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.73.1.1.1.1.6 |
||||||||||
|
adGenSeltDeltLastTestStatus
Status of the last attempted SELT or DELT test.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.73.1.1.1.1.7 |
||||||||||
|
adGenSeltDeltRetrieveData
Used to begin the transfer of the diagnostic data
to a remote server for evaluation. A get is meaningless and always returns beginTransfer(1). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.73.1.1.1.1.8 |
||||||||||
|
adGenSeltDeltEnumTestStatus
Used to display the state of the current test in an
enumerated format. The descriptions of the values are: idle(1) - Signifies the unit can accept an activation command. This response will … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.664.5.73.1.1.1.1.9 |
||||||||||
|
adGenSeltDeltTestRemoteDevice
The remote device index selected for test operation.
NOTE: adGenSeltDeltTestPortNumber should be set to 0 prior to provisioning of this remote device indexing |
IF-MIBInterfaceIndexr/w Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.664.5.73.1.1.1.1.10 |