adGenSeltDeltEnumTestStatus
ADTRAN-GEN-SELTDELT-MIB ·
.1.3.6.1.4.1.664.5.73.1.1.1.1.9
Object
column
Enumeration
Used to display the state of the current test in an
enumerated format.
The descriptions of the values are:
idle(1) - Signifies the unit can accept an activation
command. This response will only occur if no
previous test has completed.
active(2) - Signifies a SELT or DELT test is currently active.
collectingData(3) - Signifies the test is complete and the data is
being retrieved from the datapump.
dataAvailable(4) - Signifies the test is complete and the data is
availble for the user to retrieve for evaluation.
testFailed(5) - Signifies the SELT or DELT test failed.
Use adGenSeltDeltLastTestStatus to determine the reason.
Context
- MIB
- ADTRAN-GEN-SELTDELT-MIB
- OID
.1.3.6.1.4.1.664.5.73.1.1.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenSeltDeltEntry
- Table
- adGenSeltDeltTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | idle |
2 | active |
3 | collectingData |
4 | dataAvailable |
5 | testFailed |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenSeltDeltTestPortNumber Selected port number for test operation.
The valid range is 0 up to the number of
ports on the card. This is functionally
equivalent to the port number of the
selected interface.
… | column | Integer32 | .1.3.6.1.4.1.664.5.73.1.1.1.1.1 |
| adGenSeltDeltTestRemoteDevice The remote device index selected for test operation.
NOTE: adGenSeltDeltTestPortNumber should
be set to 0 prior to provisioning of this
remote device… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.664.5.73.1.1.1.1.10 |
| adGenSeltDeltTestFilename Name of the file to be transmitted via TFTP
containing all of the test data for the selected
interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.73.1.1.1.1.2 |
| adGenSeltDeltStartSELTTest Used to initiate the SELT test for the xDSL port. When
the SELT test has completed the data file can be transferred
to a server via TFTP using adGenSeltDeltRetrieveData.
The TFTP… | column | Enumeration | .1.3.6.1.4.1.664.5.73.1.1.1.1.3 |
| adGenSeltDeltStartDELTTest Used to initiate the DELT test for the xDSL port. When
the DELT test has completed the data file can be transferred
to a server via TFTP using adGenSeltDeltRetrieveData.
The TFTP… | column | Enumeration | .1.3.6.1.4.1.664.5.73.1.1.1.1.4 |
| adGenSeltDeltStopTest Used to terminate the currently active test.
A get is meaningless and will always return stop(1). | column | Enumeration | .1.3.6.1.4.1.664.5.73.1.1.1.1.5 |
| adGenSeltDeltCurrentTestStatus Status of the currently active SELT or DELT test. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.73.1.1.1.1.6 |
| adGenSeltDeltLastTestStatus Status of the last attempted SELT or DELT test. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.73.1.1.1.1.7 |
| adGenSeltDeltRetrieveData Used to begin the transfer of the diagnostic data
to a remote server for evaluation.
A get is meaningless and always returns beginTransfer(1). | column | Enumeration | .1.3.6.1.4.1.664.5.73.1.1.1.1.8 |