A3Com-MLN-r1-MIB Table View

This object specifies a port entry in the table and is
specified as a value within the total port range
(a3mlnMaxPorts).

The port's type. A value of `ppmPort' indicates that the
port has not been configured in any Logical Network.

The port's owner (media type). If this is a Group Port, all
Member ports must have the same owner. A value of `otherMedia'
would imply a non-supported owner (media type).

For a Group Port, this is either the value of the first
member port or, if there are no member ports, the value
negative two. For a Member port, this is the value of
Group Port.

The Spanning Tree state of this port. For a Group Port,
this is the aggregate of all Member port states. If all
Member ports are blocking, the Group Port is blocking.
If a single Member port is forwarding, the Group Por…

Only valid for Member ports. This is the Transparent Bridge
CONTrol value setting of the learn parameter. If the port
has not been configured as a Logical Network port, the value
`ignore' will be returned.

Only valid for Group Ports. This is the value of the physical
port assigned as the group's primary port. This value is
assigned by the agent and may change over time.

Only valid for Group Ports. This is the physical port used
to assign the group's source MAC address used for all packets
transmitted by the group. This value is assigned by the agent.
A value of negative two indicates t…

Only valid for Group Ports. This is the media type of the
physical port being used for the group's source address.
This value is assigned by the agent.

Only valid for Group Ports. This is the physical MAC
address of the group's source port. In the future, a profile
VARIATION should be used to further specify media formats
such as MacAddress, SMDSAddress, etc. This valu…

Only valid for Group Ports. This is the description (name)
string for this Logical Network.

This object specifies an entry in the table, and is a
Group Port. Group Ports are virtual ports used as points
of attachment to Logical Networks by upper layer clients.
Valid values number within the virtual port range …

This port's type. The only valid value for a Group Port is
`groupPort'.

The PPM state of this Group Port.

This is the value of the physical port assigned as
the group's primary port. This value is assigned by
the agent.

The owner of this group (which is actually the media type
for the group). All Member ports must have the same owner.

The number of Member ports in this group.

This is the value (index) of the first Member port of
this group. A value of negative two indicates that no
Member ports have been configured.

The description (name) string for this logical network.

This object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB. Note - A group's description may be changed
without first deleting the row.

This object specifies a Logical Network within the table
and is a Group Port within the virtual port range (greater
than a3mlnMaxPhyPorts and less than a3mlnMaxPorts).

This object specifies a Member port within a Logical Network
and is a physical port within the physical port range
(less than a3mlnMaxPhyPorts).

The owner of this group (which is actually the media type
for the group). All Member ports must have the same owner.

This object is used to add and delete entries in this
table. See RowStatus description at the beginning of
this MIB.

This object specifies an entry in the port statistics table
and is a Member port within the physical port range (less
than a3mlnMaxPhyPorts).

Count of data frames received on this port.

Count of data frames transmitted from this port.

Count of detected stations moving away from this port.

Count of detected stations moving to this port.

Count of Spanning Tree state changes for this port.