A3Com-IPXpolicy-r3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
49

a3ipxPolControlTable

table mandatory
.1.3.6.1.4.1.43.2.11.1 · 1 row entry · 16 columns
Open in standard view 
This table enables and disables the use of policies,
policy attributes and the use of trusted neighbors
and their attributes.
a3ipxPolControlEntry entry .1.3.6.1.4.1.43.2.11.1.1
A single entry in the Policy Control Table
Indexes
a3ipxPCPort
Column Syntax OID
a3ipxPCPort mandatory
The port to which this Policy Control entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.1.1.1
a3ipxPCRteAdvCtl mandatory
The object enables or disables the use of the
'advertisable' entries in the Route Policy Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.2
a3ipxPCRteAdvType mandatory
The object specifies whether only those routes listed
as 'advertisable' in the Route Policy Table are
advertised from this port (normal), or if only those
routes that are not listed as 'advertisable' in the
Route Pol…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.1.1.3
a3ipxPCRteRcvCtl mandatory
The object enables or disables the use of the
'receivable' entries in the Route Policy Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.4
a3ipxPCRteRcvType mandatory
The object specifies whether only those routes listed
as 'receivable' in the Route Policy Table are accepted
from this port (normal), or if only those routes that
are not listed as 'receivable' in the Route Policy Tab…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.1.1.5
a3ipxPCSvcAdvCtl mandatory
The object enables or disables the use of the
'advertisable' entries in the Service Policy Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.6
a3ipxPCSvcAdvType mandatory
The object specifies whether only those routes listed
as 'advertisable' in the Service Policy Table are
advertised from this port (normal), or if only those
routes that are not listed as 'advertisable' in the
Service…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.1.1.7
a3ipxPCSvcRcvCtl mandatory
The object enables or disables the use of the
'receivable' entries in the Service Policy Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.8
a3ipxPCSvcRcvType mandatory
The object specifies whether only those routes listed
as 'receivable' in the Service Policy Table are
accepted from this port (normal), or if only those
routes that are not listed as 'receivable' in the
Service Polic…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.1.1.9
a3ipxPCNbrAdvCtl obsolete
This object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors to which routing and service
reachability information is advertised.

In other words, this object…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.10
a3ipxPCNbrRcvCtl obsolete
The object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors from which routing and service
reachability information is allowed to be received.

In other words…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.1.1.11
a3ipxPCNbrRcvType obsolete
If this object is set to normal(1), then route
and service reachability information is accepted
only from those neighbors listed in the Neighbor
Policy Table for which a3ipxPolNbrType = receive(2)
or both(3).
…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.1.1.12
a3ipxPCPolicyOverride obsolete
Policy Override is used to override the configured
policies when the router issues responses to specific
RIP or SAP requests. The configured policies are
always applied for regular RIP or SAP updates.

…
Enumerationr/w
Enumerated Values:
1policyOverride
2noPolicyOverride
 .1.3.6.1.4.1.43.2.11.1.1.13
a3ipxPCSvrRplyCtl mandatory
This controls whether or not the router is
permitted to respond to 'get nearest server'
requests. If this object has the value
bestSvrReply(1), then this router is permitted
to respond to these requests. If this objec…
Enumerationr/w
Enumerated Values:
1bestSvrReply
2noBestSvrReply
 .1.3.6.1.4.1.43.2.11.1.1.14
a3ipxPCRipPolOverride mandatory
RIP Policy Override is used to override the configured
RIP policies when the router issues responses to specific
RIP requests. The configured policies are always
applied for regular RIP updates.
Enumerationr/w
Enumerated Values:
1policyOverride
2noPolicyOverride
 .1.3.6.1.4.1.43.2.11.1.1.15
a3ipxPCSapPolOverride mandatory
SAP Policy Override is used to override the configured
policies when the router issues responses to specific
SAP requests. The configured policies are always
applied for regular SAP updates.
Enumerationr/w
Enumerated Values:
1policyOverride
2noPolicyOverride
 .1.3.6.1.4.1.43.2.11.1.1.16

a3ipxPolRteTable

table mandatory
.1.3.6.1.4.1.43.2.11.2 · 1 row entry · 5 columns
Open in standard view 
The IPX Route Policy Table controls the acceptance
of route reachability information from neighbors and
the advertisement of route reachability information
to neighbors.
          
If a3ipxPCRteRcvType is configured as normal, a route
is accepted if the network number for the route is in
the list of 'receivable' networks specified in this
table.  If a3ipxPCRteRcvType is configure as inverse, a
route is not accepted if the network number for the 
route is in the list of 'receivable' networks specified 
in this table.
          
If a3ipxPCRteAdvType is configured as normal, a route
is advertised if the network number for the route is in
the list of 'advertisable' networks specified in this
table.  If a3ipxPCRteAdvType is configure as inverse, a
route is not advertised if the network number for the 
route is in the list of 'advertisable' networks specified 
in this table.
          
Note, since this table allows ranges of routes to be
specified, all the entries should be examined when
determining if a specific route is affected by these
policies.  It is not sufficient to search for an instance
of a3ipxPolRteNet1 that matches the route in question.
a3ipxPolRteEntry entry .1.3.6.1.4.1.43.2.11.2.1
A single entry in the Route Policy table
Indexes
a3ipxPolRtePort a3ipxPolRteNet1 a3ipxPolRteNet2
Column Syntax OID
a3ipxPolRtePort mandatory
The IPX port to which this Receive Route Policy
entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.2.1.1
a3ipxPolRteType mandatory
This object specifies whether this entry applies
to receiving routes, advertising routes, or both.
Enumerationr/w
Enumerated Values:
1advertise
2receive
3both
 .1.3.6.1.4.1.43.2.11.2.1.2
a3ipxPolRteNet1 mandatory
The IPX Network Number for which route information
is accepted or rejected for this port. The value
0xfffffffe is used to represent the default route.
IPXNET
Textual Convention: IPXNET OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.11.2.1.3
a3ipxPolRteNet2 mandatory
When the value of this object is a valid IPX
network and different from a3ipxPolRteNet1, then
this table entries specifies a range of IPX
networks, with the value of a3ipxPolRteNet1
identifying the lower end of the r…
IPXNET
Textual Convention: IPXNET OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.11.2.1.4
a3ipxPolRteStatus mandatory
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.11.2.1.5

a3ipxPolSvcTable

table mandatory
.1.3.6.1.4.1.43.2.11.3 · 1 row entry · 5 columns
Open in standard view 
The IPX Policy Services Table controls the acceptance
of service reachability information from neighbors
and the advertisement of that information to neighbors.
          
If a3ipxPCSvcRcvType is configured as normal, a service
is accepted if its port number, server name, and
service type is in the list of tuples specified as 
'receivable' by this table.  If a3ipxPCSvcRcvType is 
configured as inverse, a service is not accepted if its 
port number, server name, and service type is in 
the list of tuples specified as 'receivable' by this 
table.
          
If a3ipxPCSvcAdvType is configured as normal, a service
is advertised if its network port, server name, and
service type is in the list of tuples specified as 
'advertisable' by this table.  If a3ipxPCSvcAdvType is 
configured as inverse, a service is not advertised if its 
port number, server name, and service type is in 
the list of tuples specified as 'advertisable' by this 
table.
a3ipxPolSvcEntry entry .1.3.6.1.4.1.43.2.11.3.1
A single entry in the Receive Services Policy table.
Indexes
a3ipxPolSvcPort a3ipxPolSvcSvrName a3ipxPolSvcType
Column Syntax OID
a3ipxPolSvcPort mandatory
The IPX port to which this Receive Svc Pol
entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.3.1.1
a3ipxPolSvcEntryType mandatory
This object specifies whether this entry applies
to receiving services, advertising services, or both.
Enumerationr/w
Enumerated Values:
1advertise
2receive
3both
 .1.3.6.1.4.1.43.2.11.3.1.2
a3ipxPolSvcSvrName mandatory
This object contains the name of a server.

A single wildcard (*) is allowed at the end of
the name.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.43.2.11.3.1.3
a3ipxPolSvcType mandatory
The type of service for which information is accepted
or rejected by this port. The value 'FFFF' acts
as a wildcard for all service types.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.43.2.11.3.1.4
a3ipxPolSvcStatus mandatory
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.11.3.1.5

a3ipxPolNbrTable

table obsolete
.1.3.6.1.4.1.43.2.11.4 · 1 row entry · 5 columns
Open in standard view 
This table defines a set of neighbors to which
the route and service reachability information is 
advertised.  This table also defines a set of
neighbors from which route and service reachability
information is accepted.
          
NOTE: this table is not supported by NETBuilders
running sw version 8.0 and greater.  The functionality
provided by this table has been replaced by
a3ipxPolRipNbrTable and a3ipxPolSapNbrTable.
a3ipxPolNbrEntry entry .1.3.6.1.4.1.43.2.11.4.1
A single entry in the Policy Neighbor Table
Indexes
a3ipxPolNbrPort a3ipxPolNbrNet a3ipxPolNbrAddress
Column Syntax OID
a3ipxPolNbrPort obsolete
The IPX port over which the Trusted Neighbor identified
by this table entry can be reached.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.4.1.1
a3ipxPolNbrType obsolete
This object specifies whether this entry applies
to receiving information, advertising information,
or both.
Enumerationr/w
Enumerated Values:
1advertise
2receive
3both
 .1.3.6.1.4.1.43.2.11.4.1.2
a3ipxPolNbrNet obsolete
The IPX Network number identifying the network
to which the neighbor identified by this table
entry is attached.
IPXNET
Textual Convention: IPXNET OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.11.4.1.3
a3ipxPolNbrAddress obsolete
The Mac Address of the Neighbor to whom route and service
reachability information is to be advertised and from which
route and service reachability information is accepted.
.1.3.6.1.4.1.43.2.11.4.1.4
a3ipxPolNbrStatus obsolete
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.11.4.1.5

a3ipxPolRipNbrCtlTable

table mandatory
.1.3.6.1.4.1.43.2.11.5.1 · 1 row entry · 4 columns
Open in standard view 
This table enables or disables the use of
the entries in a3ipxPolRipNbrTable.  If
the use of the entries in that table is enabled,
this table also controls how they are interpreted.
In one case, RIP updates are accepted only from those 
IPX Neighbors listed in a3ipxPolRipNbrTable.  In the
other case, RIP updates are accepted only from those
IPX Neighbors not listed in a3ipxPolRipNbrTable.
a3ipxPolRipNbrCtlEntry entry .1.3.6.1.4.1.43.2.11.5.1.1
Each entry in this table applies to a separate
NETBuilder port and controls those entries in
a3ipxPolRipNbrTable that correspond to the same
port.
Indexes
a3ipxPolRipNbrCtlPort
Column Syntax OID
a3ipxPolRipNbrCtlPort mandatory
This NETBuilder port to which this RIP Neighbor
Control entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.5.1.1.1
a3ipxPolRipNbrCtlAdvCtl mandatory
This object enables or disables the use of the
entries in the RIP Neighbor Policy Table
(a3ipxPolRipNbrTable) that apply to neighbors
to which routing information is advertised.

In other words, this obj…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.5.1.1.2
a3ipxPolRipNbrCtlRcvCtl mandatory
The object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors from which routing information is
allowed to be received.

In other words, this object enables or…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.5.1.1.3
a3ipxPolRipNbrCtlRcvType mandatory
If this object is set to normal(1), then route
information is accepted only from those neighbors
listed in the Neighbor Policy Table for which
a3ipxPolRipNbrType = receive(2) or both(3).

If this object …
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.5.1.1.4

a3ipxPolRipNbrTable

table mandatory
.1.3.6.1.4.1.43.2.11.5.2 · 1 row entry · 5 columns
Open in standard view 
This table defines a set of neighbors to which
the route information is advertised.  This table 
also defines a set of neighbors from which route 
information is accepted.
a3ipxPolRipNbrEntry entry .1.3.6.1.4.1.43.2.11.5.2.1
A single entry in the Policy Neighbor Table
Indexes
a3ipxPolRipNbrPort a3ipxPolRipNbrNet a3ipxPolRipNbrAddress
Column Syntax OID
a3ipxPolRipNbrPort mandatory
The IPX port over which the Trusted Neighbor identified
by this table entry can be reached.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.5.2.1.1
a3ipxPolRipNbrType mandatory
This object specifies whether this entry applies
to receiving information, advertising information,
or both.
Enumerationr/w
Enumerated Values:
1advertise
2receive
3both
 .1.3.6.1.4.1.43.2.11.5.2.1.2
a3ipxPolRipNbrNet mandatory
The IPX Network number identifying the network
to which the neighbor identified by this table
entry is attached.
IPXNET
Textual Convention: IPXNET OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.11.5.2.1.3
a3ipxPolRipNbrAddress mandatory
The Mac Address of the Neighbor to whom route
information is to be advertised and from which
route information is accepted.
.1.3.6.1.4.1.43.2.11.5.2.1.4
a3ipxPolRipNbrStatus mandatory
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.11.5.2.1.5

a3ipxPolSapNbrCtlTable

table mandatory
.1.3.6.1.4.1.43.2.11.5.3 · 1 row entry · 4 columns
Open in standard view 
This table enables or disables the use of
the entries in a3ipxPolSapNbrTable.  If
the use of the entries in that table is enabled,
this table also controls how they are interpreted.
In one case, SAP updates are accepted only from those 
IPX Neighbors listed in a3ipxPolSapNbrTable.  In the
case, SAP updates are accepted only from those
IPX Neighbors not listed in a3ipxPolSapNbrTable.
a3ipxPolSapNbrCtlEntry entry .1.3.6.1.4.1.43.2.11.5.3.1
Each entry in this table applies to a separate
NETBuilder port and controls those entries in
a3ipxPolSapNbrTable that correspond to the same
port.
Indexes
a3ipxPolSapNbrCtlPort
Column Syntax OID
a3ipxPolSapNbrCtlPort mandatory
This NETBuilder port to which this SAP Neighbor
Control entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.5.3.1.1
a3ipxPolSapNbrCtlAdvCtl mandatory
This object enables or disables the use of the
entries in the SAP Neighbor Policy Table
(a3ipxPolSapNbrTable) that apply to neighbors
to which service reachability information
is advertised.

In other w…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.5.3.1.2
a3ipxPolSapNbrCtlRcvCtl mandatory
The object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors from which service reachability
information is allowed to be received.

In other words, this obje…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.11.5.3.1.3
a3ipxPolSapNbrCtlRcvType mandatory
If this object is set to normal(1), then
service reachability information is accepted
only from those neighbors listed in the Neighbor
Policy Table for which a3ipxPolSapNbrType = receive(2)
or both(3).

I…
Enumerationr/w
Enumerated Values:
1normal
2inverse
 .1.3.6.1.4.1.43.2.11.5.3.1.4

a3ipxPolSapNbrTable

table mandatory
.1.3.6.1.4.1.43.2.11.5.4 · 1 row entry · 5 columns
Open in standard view 
This table defines a set of neighbors to which
the service reachability information is advertised.  
This table also defines a set of neighbors from which 
service reachability information is accepted.
a3ipxPolSapNbrEntry entry .1.3.6.1.4.1.43.2.11.5.4.1
A single entry in the Policy Neighbor Table
Indexes
a3ipxPolSapNbrPort a3ipxPolSapNbrNet a3ipxPolSapNbrAddress
Column Syntax OID
a3ipxPolSapNbrPort mandatory
The IPX port over which the Trusted Neighbor identified
by this table entry can be reached.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.11.5.4.1.1
a3ipxPolSapNbrType mandatory
This object specifies whether this entry applies
to receiving information, advertising information,
or both.
Enumerationr/w
Enumerated Values:
1advertise
2receive
3both
 .1.3.6.1.4.1.43.2.11.5.4.1.2
a3ipxPolSapNbrNet mandatory
The IPX Network number identifying the network
to which the neighbor identified by this table
entry is attached.
IPXNET
Textual Convention: IPXNET OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.2.11.5.4.1.3
a3ipxPolSapNbrAddress mandatory
The Mac Address of the Neighbor to whom service
reachability information is to be advertised and from which
service reachability information is accepted.
.1.3.6.1.4.1.43.2.11.5.4.1.4
a3ipxPolSapNbrStatus mandatory
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.11.5.4.1.5