a3ipxPCNbrRcvType
A3Com-IPXpolicy-r3-MIB ·
.1.3.6.1.4.1.43.2.11.1.1.12
Object
column
obsolete
r/w
Enumeration
If this object is set to normal(1), then route
and service reachability information is accepted
only from those neighbors listed in the Neighbor
Policy Table for which a3ipxPolNbrType = receive(2)
or both(3).
If this object is set to inverse(2), then route
and service reachability information is accepted
from any neighbor except those neighbors listed
in the Neighbor Policy Table for which
a3ipxPolNbrType = receive(2) or both(3).
NOTE: this object is not supported by NETBuilders
running sw version 8.0 and greater. Its functionality
has been replaced by a3ipxRipPolNbrCtlTable and
a3ipxSapPolNbrCtlTable.
Context
- MIB
- A3Com-IPXpolicy-r3-MIB
- OID
.1.3.6.1.4.1.43.2.11.1.1.12- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- a3ipxPolControlEntry
- Table
- a3ipxPolControlTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | normal |
2 | inverse |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ipxPCPort mandatory The port to which this Policy Control entry applies. | column | Integer32 | .1.3.6.1.4.1.43.2.11.1.1.1 |
| a3ipxPCNbrAdvCtl obsolete This object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors to which routing and service
reachability information is advertised.
… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.10 |
| a3ipxPCNbrRcvCtl obsolete The object enables or disables the use of the
entries in the Neighbor Policy Table that apply
to neighbors from which routing and service
reachability information is allowed to be… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.11 |
| a3ipxPCPolicyOverride obsolete Policy Override is used to override the configured
policies when the router issues responses to specific
RIP or SAP requests. The configured policies are
always applied for reg… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.13 |
| a3ipxPCSvrRplyCtl mandatory This controls whether or not the router is
permitted to respond to 'get nearest server'
requests. If this object has the value
bestSvrReply(1), then this router is permitted
to r… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.14 |
| a3ipxPCRipPolOverride mandatory RIP Policy Override is used to override the configured
RIP policies when the router issues responses to specific
RIP requests. The configured policies are always
applied for r… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.15 |
| a3ipxPCSapPolOverride mandatory SAP Policy Override is used to override the configured
policies when the router issues responses to specific
SAP requests. The configured policies are always
applied for regul… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.16 |
| a3ipxPCRteAdvCtl mandatory The object enables or disables the use of the
'advertisable' entries in the Route Policy Table. | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.2 |
| a3ipxPCRteAdvType mandatory The object specifies whether only those routes listed
as 'advertisable' in the Route Policy Table are
advertised from this port (normal), or if only those
routes that are not li… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.3 |
| a3ipxPCRteRcvCtl mandatory The object enables or disables the use of the
'receivable' entries in the Route Policy Table. | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.4 |
| a3ipxPCRteRcvType mandatory The object specifies whether only those routes listed
as 'receivable' in the Route Policy Table are accepted
from this port (normal), or if only those routes that
are not listed… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.5 |
| a3ipxPCSvcAdvCtl mandatory The object enables or disables the use of the
'advertisable' entries in the Service Policy Table. | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.6 |
| a3ipxPCSvcAdvType mandatory The object specifies whether only those routes listed
as 'advertisable' in the Service Policy Table are
advertised from this port (normal), or if only those
routes that are not … | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.7 |
| a3ipxPCSvcRcvCtl mandatory The object enables or disables the use of the
'receivable' entries in the Service Policy Table. | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.8 |
| a3ipxPCSvcRcvType mandatory The object specifies whether only those routes listed
as 'receivable' in the Service Policy Table are
accepted from this port (normal), or if only those
routes that are not list… | column | Enumeration | .1.3.6.1.4.1.43.2.11.1.1.9 |