A3Com-Bridge-r3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
41

a3ComBrgStExtTable

table mandatory
.1.3.6.1.4.1.43.2.9.1.10 · 1 row entry · 3 columns
Open in standard view 
This table is an extension of the dot1dStaticTable
from the Bridge MIB, rfc1286.  One additional
column has been defined to identify the proper wide 
area address when bridging over a wide area port.
a3ComBrgStExtEntry entry .1.3.6.1.4.1.43.2.9.1.10.1
An extension to the dot1dStaticTable from rfc1286.
Indexes
a3ComBrgStExtAdd a3ComBrgStExtRcvPort
Column Syntax OID
a3ComBrgStExtAdd mandatory
A unicast MAC address for which the bridge has
forwarding and/or filtering information.
.1.3.6.1.4.1.43.2.9.1.10.1.1
a3ComBrgStExtRcvPort mandatory
Either the value '0' or the port number of the
port from which a frame must be received in order
for this entry's filtering information to apply.
A value of zero indicates that this entry applies
on all ports of the bri…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.1.10.1.2
a3ComBrgStExtWaAddress mandatory
When the destination port to which this table entry
applies is a wide area port, this object is used to
identify the wide area address to use when forwarding
packets to this destination. The type of address can
be det…
OctetString .1.3.6.1.4.1.43.2.9.1.10.1.3

a3ComBrgFdbExtTable

table mandatory
.1.3.6.1.4.1.43.2.9.1.11 · 1 row entry · 2 columns
Open in standard view 
This table is an extension of the dot1dTpFdbTable
from the Bridge MIB, rfc1286.  One additional
column has been defined to identify the proper wide 
area address when bridging over a wide area port.
a3ComBrgFdbExtEntry entry .1.3.6.1.4.1.43.2.9.1.11.1
An extension to the dot1dTpFdbTable from rfc1286.
Indexes
a3ComBrgFdbExtAdd
Column Syntax OID
a3ComBrgFdbExtAdd mandatory
A unicast MAC address for which the bridge has
forwarding and/or filtering information.
.1.3.6.1.4.1.43.2.9.1.11.1.1
a3ComBrgFdbExtWaAddress mandatory
When the port to which this table entry applies
is a wide area port, this object is used to
identify the wide area address to use when forwarding
packets to this destination. The type of address can
be determined by th…
OctetString .1.3.6.1.4.1.43.2.9.1.11.1.2

a3ComBrgPortTable

table mandatory
.1.3.6.1.4.1.43.2.9.1.12 · 1 row entry · 11 columns
Open in standard view 
This table is an extension of the dot1dBasePortTable
from the Bridge MIB defined in RFC1286.  This table
contains generic information and control facilities
for every port that is associated with the bridge.
Transparent, source-route, and srt ports are included.
a3ComBrgPortEntry entry .1.3.6.1.4.1.43.2.9.1.12.1
Each entry in this table contains information and
controls for a specific bridge port.
Indexes
a3ComBrgPortIndex
Column Syntax OID
a3ComBrgPortIndex mandatory
The port number of the port for which this
entry contains bridge management information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.1.12.1.1
a3ComBrgPortCtl mandatory
This object controls which type(s) of packets
are bridged. This has no affect on whether the
bridge participates in either the Spanning Tree
or Source Route Protocols.
Enumerationr/w
Enumerated Values:
1transparent
2sourceRoute
3srtEnabled
4noBridging
 .1.3.6.1.4.1.43.2.9.1.12.1.2
a3ComBrgDstSecCtl mandatory
This object is a security feature that allows the
control of packets sent to specific destinations.
If this object is set to forward (2), only those
packets for destination addresses listed in the static
forwarding tabl…
Enumerationr/w
Enumerated Values:
1none
2forward
3block
 .1.3.6.1.4.1.43.2.9.1.12.1.3
a3ComBrgSrcSecCtl mandatory
This object is a security feature that allows the
control of packets sent from specific source addresses.
If this object is set to forward (2), this port will
forward only those packets sent from addresses listed
in the…
Enumerationr/w
Enumerated Values:
1none
2forward
3block
 .1.3.6.1.4.1.43.2.9.1.12.1.4
a3ComBrgX25Pid mandatory
This object applies to transparent bridging
over an X25 network. It specifies the protocol
ID to be used in an outgoing X25 call.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.2.9.1.12.1.5
a3ComBrgX25Qsize obsolete
This object applies to transparent bridging
over an X25 network. It allows the specification
of the maximum number of packets that can be
queued on any single virtual circuit to a
specific DTE neighbor when the virtu…
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.43.2.9.1.12.1.6
a3ComBrgX25VcLimit obsolete
This object allows the specification of the
maximum number of virtual circuits to a
specific DTE that can be established concurrently
for transparent bridging over an x25 network.

NOTE: this object is n…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.43.2.9.1.12.1.7
a3ComBrgX25VcTimer obsolete
This object specifies the maximum amount of
time, in minutes, that can elapse when there
is no activity on the x25 virtual circuit to a DTE
before it is cleared.

NOTE: this object is no longer supported b…
Integer32r/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.43.2.9.1.12.1.8
a3ComBrgBroadCastLimit mandatory
This object specifies the maximum rate, in
packets per second, at which broadcast and
multicast packets are forwarded through this
port. If the number of these packets during
a single time interval (specified by
a3Co…
Integer32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.43.2.9.1.12.1.9
a3ComBrgSmdsGroupAddr mandatory
This identifies the SMDS Group Address that
is used by the bridge to transmit packets to
all the other bridges identified by this SMDS
Group Address. This address is used as the SMDS
destination address when transmitti…
SMDSAddressr/w
Textual Convention: SMDSAddress OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.43.2.9.1.12.1.10
a3ComBrgX25ProfId mandatory
This object specifies the X25 User ProfileID to be used for
selecting a Virtual Circuit to send Bridged Packets. Range
is 0..255. If the value specified is 0 then use the DTE Profile
ID
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.2.9.1.12.1.14

a3ComBrgX25NbrTable

table mandatory
.1.3.6.1.4.1.43.2.9.1.13 · 1 row entry · 3 columns
Open in standard view 
This table specifies the DTE address of each
X25 neighbor that supports transparent bridging.
The bridge will forward to the neighbors defined in 
this table all broadcast packets and unknown 
unicast packets.
a3ComBrgX25NbrEntry entry .1.3.6.1.4.1.43.2.9.1.13.1
Each entry contains the DTE address of an X25 neighbor.
Indexes
a3ComBrgX25NbrPort a3ComBrgX25NbrDTE
Column Syntax OID
a3ComBrgX25NbrPort mandatory
The bridge port to which this entry applies.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.1.13.1.1
a3ComBrgX25NbrDTE mandatory
The X121 address of the neighbor DTE.
X121Address
Textual Convention: X121Address OctetString
Type Constraints:
range: 0..17
 .1.3.6.1.4.1.43.2.9.1.13.1.2
a3ComBrgX25NbrStatus mandatory
This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.2.9.1.13.1.3

a3ComBrgSrPortTable

table mandatory
.1.3.6.1.4.1.43.2.9.3.2 · 1 row entry · 5 columns
Open in standard view 
This table contains port specific source routing
information.
a3ComBrgSrPortEntry entry .1.3.6.1.4.1.43.2.9.3.2.1
Each entry contains a set of information applied
to a specific bridge port.
Indexes
a3ComBrgSrPort
Column Syntax OID
a3ComBrgSrPort mandatory
This identifies the bridge port to which
the other objects in this entry apply.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.2.1.1
a3ComBrgSrPortSTEHopCount mandatory
This object contains the maximum number of
routing descriptors (ie, hop count) for Spanning
Tree Explorer frames.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.2.1.2
a3ComBrgSrPortAREHopCount mandatory
This object contains the maximum number of
routing descriptors (ie, hop count) for All
Routes Explorer frames.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.2.1.3
a3ComBrgSrPortHoldTime mandatory
This parameter specifies the time interval,
in minutes, that an inactive route entry can
reside in the source routing table.
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.43.2.9.3.2.1.4
a3ComBrgSrPortMinAccessPrior mandatory
This parameter determines the minimum access
priority used for outoing frames on this port.
End systems usually have a low access priority
while bridges have a medium priority. This
allows bridge, which typically handl…
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.43.2.9.3.2.1.5

a3ComBrgSrWanAddrTable

table mandatory
.1.3.6.1.4.1.43.2.9.3.3 · 1 row entry · 4 columns
Open in standard view 
A table containing mappings between Ring Number,
Bridge Number, and Wide Area Addresses.  This
information is learned from Explorer Frames sent
by end stations.
a3ComBrgSrWanAddrEntry entry .1.3.6.1.4.1.43.2.9.3.3.1
Each entry contains a single Ring Number, Bridge
Number, Wide Area Address mapping.
Indexes
a3ComBrgSrWAportIndex a3ComBrgSrWAringNum a3ComBrgSrWAbrgNum
Column Syntax OID
a3ComBrgSrWAportIndex mandatory
This identifies the bridge port that is connected
to the ring identified by a3ComBrgSrWAringNum.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.3.1.1
a3ComBrgSrWAringNum mandatory
This identifies a specific wide area network. When
a source route frame is bridged to this ring number,
and to the bridge identified by a3ComBrgSrWAbrgNum,
the Wide Area Address identified by the corresponding
instance…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.3.1.2
a3ComBrgSrWAbrgNum mandatory
This identifies the bridge associated with the
Wide Area Address identified by a3ComBrgSrWAddress.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.3.1.3
a3ComBrgSrWAddress mandatory
This identifies the Wide Area Address associated
with a specific ring number and bridge number. These
are identified by the corresponding instances of
a3ComBrgSrWAringNum and a3ComBrgSrWAbrgNum.
OctetString .1.3.6.1.4.1.43.2.9.3.3.1.4

a3ComBrgSrGwContTable

table mandatory
.1.3.6.1.4.1.43.2.9.3.5 · 1 row entry · 4 columns
Open in standard view
a3ComBrgSrGwContEntry entry .1.3.6.1.4.1.43.2.9.3.5.1
Each entry in this table control the behavior of
the SRT Gateway feature for a specific port.
Indexes
a3ComBrgSrGwContPort
Column Syntax OID
a3ComBrgSrGwContPort mandatory
This identifies the bridge port to which the
other objects in this entry apply.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.5.1.1
a3ComBrgSrGwCont mandatory
This parameter is used to enable or disable
the SRT Gateway feature for this port.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.43.2.9.3.5.1.2
a3ComBrgSrGwContEncapMode mandatory
This parameter is used to control how packets using
Token Ring LLC-based protocols are converted when
bridged to Ethernet LANs. If this object has the
value 'ieeeMode', those packets will be translated
into IEEE 802…
Enumerationr/w
Enumerated Values:
1ieeeMode
2etherMode
 .1.3.6.1.4.1.43.2.9.3.5.1.3
a3ComBrgSrGwContAutoMode mandatory
This parameter specifies whether or not the encapsulation
format of each end stations is stored.
Enumerationr/w
Enumerated Values:
1autoMode
2noAutoMode
 .1.3.6.1.4.1.43.2.9.3.5.1.4

a3ComBrgSrRDTable

table mandatory
.1.3.6.1.4.1.43.2.9.3.6 · 1 row entry · 9 columns
Open in standard view 
This table specifies whether end system source routing
is enabled on for each port on the system.  There are
separate controls for each protocol that may use source
routing.
a3ComBrgSrRDEntry entry .1.3.6.1.4.1.43.2.9.3.6.1
Each entry applies to a specific port.
Indexes
a3ComBrgSrRDPort
Column Syntax OID
a3ComBrgSrRDPort mandatory
This identifies the bridge port to which the
other objects in this entry apply.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.2.9.3.6.1.1
a3ComBrgSrRDAppleTalk mandatory
This specifies whether route discovery is initiated
for AppleTalke end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to n…
Enumerationr/w
Enumerated Values:
1appleTalk
2noAppleTalk
 .1.3.6.1.4.1.43.2.9.3.6.1.2
a3ComBrgSrRDClnp mandatory
This specifies whether route discovery is initiated
for CLNP end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noClnp,…
Enumerationr/w
Enumerated Values:
1clnp
2noClnp
 .1.3.6.1.4.1.43.2.9.3.6.1.3
a3ComBrgSrRDDecNet mandatory
This specifies whether route discovery is initiated
for DECNET end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noDec…
Enumerationr/w
Enumerated Values:
1decNet
2noDecNet
 .1.3.6.1.4.1.43.2.9.3.6.1.4
a3ComBrgSrRDDlTest mandatory
This specifies whether route discovery is initiated
for DlTest end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noDlT…
Enumerationr/w
Enumerated Values:
1dlTest
2noDlTest
 .1.3.6.1.4.1.43.2.9.3.6.1.5
a3ComBrgSrRDIp mandatory
This specifies whether route discovery is initiated
for IP end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noIp, all…
Enumerationr/w
Enumerated Values:
1ip
2noIp
 .1.3.6.1.4.1.43.2.9.3.6.1.6
a3ComBrgSrRDIpx mandatory
This specifies whether route discovery is initiated
for IPX end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noIpx, a…
Enumerationr/w
Enumerated Values:
1ipx
2noIpx
 .1.3.6.1.4.1.43.2.9.3.6.1.7
a3ComBrgSrRDLlc2 mandatory
This specifies whether route discovery is initiated
for LLC2 end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noLlc2,…
Enumerationr/w
Enumerated Values:
1llc2
2noLlc2
 .1.3.6.1.4.1.43.2.9.3.6.1.8
a3ComBrgSrRDVines mandatory
This specifies whether route discovery is initiated
for Vines end system packets. This discovery
process occurs when a route to the end system does
not exist in the local source routing table. If this
is set to noVine…
Enumerationr/w
Enumerated Values:
1vines
2noVines
 .1.3.6.1.4.1.43.2.9.3.6.1.9