A3COM0420-SWITCH-EXTENSIONS Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

prConfigPortTable

table mandatory

.1.3.6.1.4.1.43.10.34.2.1 · 1 row entry · 5 columns

Open in standard view

Table providing configuration information about a port on a
          
Switch unit.

prConfigPortEntry entry .1.3.6.1.4.1.43.10.34.2.1.1

Configuration options for a single port.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

prConPortVLANConfigMode mandatory

This object specifies the VLAN mode to be used. Setting it to

portMode(3) requires the user to configure the port's VLAN

membership explicitly, whereas autoSelect(4) causes it to
…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	useDefault
3	portMode
4	autoSelect

.1.3.6.1.4.1.43.10.34.2.1.1.1

prConPortIFM mandatory

This object controls Intelligent Flow Management for the port,

which specifies what action the port takes whenever it is unable

to receive a packet because its buffers are full. When set to…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	off
3	maxJams6
4	maxJams7
5	maxJams8
6	maxJams9
7	maxJams10
8	maxJams11
9	maxJams12
10	maxJams13

.1.3.6.1.4.1.43.10.34.2.1.1.13

prConPortLacp mandatory

This object specifies whether a port will use LACP. When

enabled LACP will be active on the port. When disabled LACP

will cease this may cause a port to be taken out of an

…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.43.10.34.2.1.1.14

prConPortStpAdminPathCost mandatory

The administratively assigned value of the path cost for
this port. The contribution of this port to the path cost of
paths towards the spanning tree root which include this port.
802.1D-1990 recommends that the default…

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.43.10.34.2.1.1.15

prConPortCascadeMode mandatory

This object specifies whether the port is a cascade port
or not. If enabled, the port is operating as a cascade
port. If disabled, the port is not operating as a
cascade port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.10.34.2.1.1.16

prConPortFdbTable

table mandatory

.1.3.6.1.4.1.43.10.34.2.2 · 1 row entry · 4 columns

Open in standard view

This table provides the same information as that held in the
          
dot1qTpFdbTable in the Bridge Extension MIB.

prConPortFdbEntry entry .1.3.6.1.4.1.43.10.34.2.2.1

Information about a specific unicast MAC address.

Indexes

prConPortFdbPort prConPortFdbId prConPortFdbAddress

Column Syntax OID

prConPortFdbPort mandatory

This contains the port number that this address has been seen

on. It is similar to dot1qTpFdbPort in the Bridge Extensions

MIB but may not be the value zero.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.43.10.34.2.2.1.1

prConPortFdbId mandatory

The identity of this filtering database. This shall have the

same value as is defined for dot1qFdbId in the bridge MIB

extensions MIB.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.10.34.2.2.1.2

prConPortFdbAddress mandatory

This object contains the unicast MAC address of the entry.

This contains the same value as dot1qTpFdbAddress in the Bridge

Extensions MIB.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.43.10.34.2.2.1.3

prConPortFdbStatus mandatory

This contains the same information as dot1qTpFdbStatus in the

Bridge Extensions MIB.

Enumeration

Enumerated Values:

1	other
2	invalid
3	learned
4	self
5	mgmt

.1.3.6.1.4.1.43.10.34.2.2.1.4

prConTrunkMulticastTable

table mandatory

.1.3.6.1.4.1.43.10.34.2.3 · 1 row entry · 6 columns

Open in standard view

Table for distributing multicast addresses on trunks across a
          
stack.

prConTrunkMulticastEntry entry .1.3.6.1.4.1.43.10.34.2.3.1

Information associated with a single multicast entry.

Indexes

prConTrunkMulticastFdbId prConTrunkMulticastAddress

Column Syntax OID

prConTrunkMulticastFdbId mandatory

The identity of the filtering database. This contains the same

value as dot1qFdbId in the Bridge Extensions MIB.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.10.34.2.3.1.1

prConTrunkMulticastAddress mandatory

This object contains the multicast MAC address of the entry.

This contains the same value as the dot1qTpGroupAddress in the

Bridge Extensions MIB

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.43.10.34.2.3.1.2

prConTrunkMulticastPortlist mandatory

The set of trunk ports to which frames destined for this

multicast address should be forwarded. Each octet within the

value of this object specifies a set or eight trunk ports, with
…

OctetStringr/w

.1.3.6.1.4.1.43.10.34.2.3.1.3

prConTrunkMulticastStatus mandatory

This object specifies the status of the entry. The default

value is other(1). This object contains the same information as

dot1dStaticStatus in RFC1493.

Enumerationr/w

Enumerated Values:

1	other
2	invalid
3	permanent
4	deleteOnReset
5	deleteOnTimeout

.1.3.6.1.4.1.43.10.34.2.3.1.4

prConTrunkMulticastType mandatory

This object contains the same information as dot1qTpFdbStatus

in the Bridge Extensions MIB.

Enumerationr/w

Enumerated Values:

1	other
2	invalid
3	learned
4	self
5	mgmt

.1.3.6.1.4.1.43.10.34.2.3.1.5

prConTrunkMulticastRobp mandatory

This object contains the Receive on Blocked port setting.

Enumeration

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.43.10.34.2.3.1.6

prConIfIndexTable

table mandatory

.1.3.6.1.4.1.43.10.34.2.4 · 1 row entry · 4 columns

Open in standard view

Table for translating between unit.port and ifIndex or bridge
          
port number.

prConIfIndexEntry entry .1.3.6.1.4.1.43.10.34.2.4.1

The IfIndex and bridge port number associated with a port

entry.

Indexes

prConIfIndexGroupIndex prConIfIndexPortIndex

Column	Syntax	OID
prConIfIndexGroupIndex mandatory This object identifies the group, unit or blade containing the port for which this entry contains information.	Integer32 Constraints: `range: 1-1024`	`.1.3.6.1.4.1.43.10.34.2.4.1.1`
prConIfIndexPortIndex mandatory This object identifies the port within the group for which this entry contains information.	Integer32 Constraints: `range: 1-1024`	`.1.3.6.1.4.1.43.10.34.2.4.1.2`
prConIfIndex mandatory This object contains the corresponding ifIndex value.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.43.10.34.2.4.1.3`
prConIfIndexBridgePort mandatory The corresponding bridge port number, which is the number of the port as defined by RFC1493. If a port is a member of an aggregation, the value will be that of the aggregation rather …	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.43.10.34.2.4.1.4`

prConfigAggTable

table mandatory

.1.3.6.1.4.1.43.10.34.2.5 · 1 row entry · 1 columns

Open in standard view

Table providing configuration information about an aggregation
on a Switch unit.

prConfigAggEntry entry .1.3.6.1.4.1.43.10.34.2.5.1

Configuration information for a single aggregation.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

prConfigAggStatus mandatory

This object specifies the aggregation status. The status
is indicated as follows:
unused(1) the aggregation is not presently in use.
autoInUse(2) the aggregation was selected as a result of
…

Enumeration

Enumerated Values:

1	unused
2	autoInUse
3	autoAgeing
4	autoReusable
5	manual

.1.3.6.1.4.1.43.10.34.2.5.1.1