prConPortIFM

A3COM0420-SWITCH-EXTENSIONS · .1.3.6.1.4.1.43.10.34.2.1.1.13

MIB view Table view

Object

column mandatory r/w Enumeration

This object controls Intelligent Flow Management for the port,

which specifies what action the port takes whenever it is unable

to receive a packet because its buffers are full. When set to

off(2), the packet is dropped immediately. If it is set to any

of the values maxJams6(3) to maxJams13(10), a jam signal is

transmitted to the segment attached to the port to force a

collision so that the originator will stop and retransmit the

frame. This will be repeated a maximum of 6 to 13 times

depending on the setting. If the port is then still unable to

receive the packet it is dropped. Intelligent Flow Management

should be disabled on ports which are connected to ree Rapid Spanning Tree Protocol,

defined by IEEE Std. 802.1w.

Enumeration

Enumerated Values

Sibling Objects

Object	Type	Syntax	OID
prConPortVLANConfigMode mandatory This object specifies the VLAN mode to be used. Setting it to portMode(3) requires the user to configure the port's VLAN membership explicitly, wher…	column	Enumeration	`.1.3.6.1.4.1.43.10.34.2.1.1.1`
prConPortLacp mandatory This object specifies whether a port will use LACP. When enabled LACP will be active on the port. When disabled LACP will cease this may cause a po…	column	Enumeration	`.1.3.6.1.4.1.43.10.34.2.1.1.14`
prConPortStpAdminPathCost mandatory The administratively assigned value of the path cost for this port. The contribution of this port to the path cost of paths towards the spanning tree root which include this port.…	column	Integer32	`.1.3.6.1.4.1.43.10.34.2.1.1.15`
prConPortCascadeMode mandatory This object specifies whether the port is a cascade port or not. If enabled, the port is operating as a cascade port. If disabled, the port is not operating as a cascade port.	column	Enumeration	`.1.3.6.1.4.1.43.10.34.2.1.1.16`