A3COM0054-BRASICA2-SPECIFIC Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
7

prConfigPortTable

table mandatory
.1.3.6.1.4.1.43.10.34.2.1 · 1 row entry · 7 columns
Table  providing  configuration information about a port on a
Switch unit.
prConfigPortEntry entry .1.3.6.1.4.1.43.10.34.2.1.1
Configuration options for a single port.
Indexes
Column Syntax OID
prConPortVLANConfigMode mandatory
This object specifies the VLAN mode to be used. Setting it to
portMode(3) requires the user to configure the port's VLAN
membership explicitly, whereas autoSelect(4) causes it to
acquire its membership from the…
Enumerationr/w
Enumerated Values:
1notApplicable
2useDefault
3portMode
4autoSelect
.1.3.6.1.4.1.43.10.34.2.1.1.1
prConPortIFM mandatory
This object controls Intelligent Flow Management for the
port, which specifies what action the port takes whenever it
is unable to receive a packet because its buffers are full.
When set to off(1), the packet…
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3maxJams6
4maxJams7
5maxJams8
6maxJams9
7maxJams10
8maxJams11
9maxJams12
10maxJams13
.1.3.6.1.4.1.43.10.34.2.1.1.2
prConPortDiscardOnTx mandatory
This object controls whether the 'Discard-on-transmit'
feature is enabled for frames originating at this port. If set
to on(3), the unit will discard frames destined for any other
port if that port's transmi…
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3on
.1.3.6.1.4.1.43.10.34.2.1.1.3
prConPortPaceMode mandatory
This object specifies the type of backoff algorithm used on
the port. A port can use the standard ethernet algorithm or,
for PACE applications, it can be set to low latency mode. In
this mode, the backoff algorit…
Enumerationr/w
Enumerated Values:
1notApplicable
2useDefault
3normalEthernet
4lowLatency
.1.3.6.1.4.1.43.10.34.2.1.1.4
prConPortStpFastStart mandatory
This object specifies whether a switch port will go to the
forwarding state immediately if spanning tree is turned on.
When this object is set to on(2), the normal intermediate
startup states of listening a…
Enumerationr/w
Enumerated Values:
1off
2on
.1.3.6.1.4.1.43.10.34.2.1.1.5
prConPortFlowCntlStatus mandatory
This object represents the operational full duplex flow
control state of the port, as determined by either (1) the
result of auto-negotiation, or (2) if auto-negotiation is not
enabled for this port, …
Enumeration
Enumerated Values:
1enabled
2disabled
3notApplicable
.1.3.6.1.4.1.43.10.34.2.1.1.6
prConPortFlowCntlDefaultStatus mandatory
This object represents the administratively-configured full
duplex flow control status of the port. If auto-negotiation is
not enabled for this port, the value of this object determines
the operational full duplex f…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.43.10.34.2.1.1.7