prConPortStpFastStart
A3COM0054-BRASICA2-SPECIFIC ·
.1.3.6.1.4.1.43.10.34.2.1.1.5
Object
column
mandatory
r/w
Enumeration
This object specifies whether a switch port will go to the
forwarding state immediately if spanning tree is turned on.
When this object is set to on(2), the normal intermediate
startup states of listening and learning are skipped and the
port is allowed to enter the forwarding spanning tree state
immediately. This is to allow switch ports that are directly
connected to just one endstation to be immediately available
when the link is detected or the switch powers up.
Note that this object must be set of off(1) for all switch
ports that are connected to ethernet segments or other
switches, routers or bridges.
The default state for all ports is off(1).
Context
- MIB
- A3COM0054-BRASICA2-SPECIFIC
- OID
.1.3.6.1.4.1.43.10.34.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- prConfigPortEntry
- Table
- prConfigPortTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prConPortVLANConfigMode mandatory This object specifies the VLAN mode to be used. Setting it to
portMode(3) requires the user to configure the port's VLAN
membership explicitly, whereas autoSelect(4) cause… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.1 |
| prConPortIFM mandatory This object controls Intelligent Flow Management for the
port, which specifies what action the port takes whenever it
is unable to receive a packet because its buffers a… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.2 |
| prConPortDiscardOnTx mandatory This object controls whether the 'Discard-on-transmit'
feature is enabled for frames originating at this port. If set
to on(3), the unit will discard frames destined for a… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.3 |
| prConPortPaceMode mandatory This object specifies the type of backoff algorithm used on
the port. A port can use the standard ethernet algorithm or,
for PACE applications, it can be set to low latency m… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.4 |
| prConPortFlowCntlStatus mandatory This object represents the operational full duplex flow
control state of the port, as determined by either (1) the
result of auto-negotiation, or (2) if auto-negotiatio… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.6 |
| prConPortFlowCntlDefaultStatus mandatory This object represents the administratively-configured full
duplex flow control status of the port. If auto-negotiation is
not enabled for this port, the value of this object de… | column | Enumeration | .1.3.6.1.4.1.43.10.34.2.1.1.7 |