A3COM-HUAWEI-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

h3cTunnelIfTable

table
.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1 · 1 row entry · 9 columns
Open in standard view 
The (conceptual) table containing information on configured tunnels.
h3cTunnelIfEntry entry .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1
An entry (conceptual row) containing the information on a
particular configured tunnel.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
H3cTunnelTyper/w
Textual Convention: H3cTunnelType Enumeration
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
35tunnelModeReserve
36tunnelModeIPv4Gre
37tunnelModeIPv6Gre
38tunnelModeIPv4IPv4
39tunnelModeIPv4IPv6Config
40tunnelModeIPv4IPv6Auto
41tunnelModeIPv4IPv66to4
42tunnelModeIPv4IPv6Isatap
43tunnelModeIPv6IPv4
44tunnelModeIPv6IPv6
45tunnelModeIPv4UdpDVPN
46tunnelModeIPv4GreDVPN
47tunnelModeIPv6UdpDVPN
48tunnelModeIPv6GreDVPN
49tunnelModeCrLsp
50tunnelModeMax
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.3
h3cTunnelIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.4
h3cTunnelIfSecurity
The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
information…
Enumeration
Enumerated Values:
1none
2ipsec
3other
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.5
h3cTunnelIfTOS
The method used to set the high 6 bits (the
differentiated services codepoint) of the IPv4 TOS or
IPv6 Traffic Class in the outer IP header. A value of
-1 indicates that the bits are copied from the
payload's header. A…
Integer32
Constraints:
range: -2-63
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.6
h3cTunnelIfFlowLabel
The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
h3cTunnelIfAddressType indicates the tunnel is not over
IPv6. A value of -1 indicates that a traffic
conditioner is invoked…
IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny
Textual Convention: IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny Integer32
Type Constraints:
range: -1..1048575
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.7
h3cTunnelIfAddressType
The type of address in the corresponding
h3cTunnelIfLocalInetAddress and h3cTunnelIfRemoteInetAddress
objects.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.8
h3cTunnelIfLocalInetAddress
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by h3cTun…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.9
h3cTunnelIfRemoteInetAddress
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the valu…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.10
h3cTunnelIfEncapsLimit
The maximum number of additional encapsulations
permitted for packets undergoing encapsulation at this
node. A value of -1 indicates that no limit is
present (except as a result of the packet size).
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.11

h3cTunnelInetConfigTable

table
.1.3.6.1.4.1.43.45.1.10.2.53.1.1.3 · 1 row entry · 5 columns
Open in standard view 
The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value.  It can also be used for row creation. Note
that every row in the h3cTunnelIfTable with a fixed
destination address should have a corresponding row in
the h3cTunnelInetConfigTable, regardless of whether it
was created via SNMP.
h3cTunnelInetConfigEntry entry .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1
An entry (conceptual row) containing the information
on a particular configured tunnel.
Indexes
h3cTunnelInetConfigSlot h3cTunnelInetConfigSubSlot h3cTunnelInetConfigTunnNum
Column Syntax OID
h3cTunnelInetConfigSlot
Slot number. h3cTunnelInetConfigSlot, h3cTunnelInetConfigSubSlot
and h3cTunnelInetConfigTunnNum descirbe a tunnel interface.
For Example, interface tunnel 0/0/25 would be configured as:
h3cTunnelInetConfigSlot …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.1
h3cTunnelInetConfigSubSlot
Sub slot number. As described in h3cTunnelInetConfigSlot's description.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.2
h3cTunnelInetConfigTunnNum
Tunnel number. As described in h3cTunnelInetConfigSlot's description.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.3
h3cTunnelInetConfigIfIndex
If the value of h3cTunnelInetConfigStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that the i…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.6
h3cTunnelInetConfigStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table. The
agent need not support setting this object to
createAndWait or notInService since there are no other
writable obje…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.53.1.1.3.1.7