h3cTunnelIfLocalInetAddress

A3COM-HUAWEI-TUNNEL-MIB · .1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.9
MIB view Table view

Object

column r/w INET-ADDRESS-MIBInetAddress 
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. The type of this
object is given by h3cTunnelIfAddressType.

Context

MIB
A3COM-HUAWEI-TUNNEL-MIB
OID
.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.9
Type
column
Access
readwrite
Status
current
Parent
h3cTunnelIfEntry
Table
h3cTunnelIfTable
Siblings
8

Syntax

INET-ADDRESS-MIBInetAddress
Source
INET-ADDRESS-MIBInetAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cTunnelIfRemoteInetAddress
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link …
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.10
h3cTunnelIfEncapsLimit
The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result o…
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.11
h3cTunnelIfEncapsMethod
The encapsulation method used by the tunnel.
columnH3cTunnelType.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.3
h3cTunnelIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header.
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.4
h3cTunnelIfSecurity
The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. Mo…
columnEnumeration.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.5
h3cTunnelIfTOS
The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits…
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.6
h3cTunnelIfFlowLabel
The method used to set the IPv6 Flow Label value. This object need not be present in rows where h3cTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicat…
columnIPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.7
h3cTunnelIfAddressType
The type of address in the corresponding h3cTunnelIfLocalInetAddress and h3cTunnelIfRemoteInetAddress objects.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.43.45.1.10.2.53.1.1.1.1.8