A3COM-HUAWEI-LswINF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
79
.1.3.6.1.4.1.43.45.1.2.23.1.1.1 · 1 row entry · 40 columns
Extended Huawei private interface information table.
hwifXXEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1
Entries of extended Huawei private interface information table.
Indexes
No indexes recorded
Column Syntax OID
hwifUnBoundPort
Whether it is the unbound port. (true indicates that the port is
the main port of the aggregation or the port does not participate
in the aggregation.)
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.1
hwifISPhyPort
Whether it is a physical interface.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.2
hwifAggregatePort
Whether it is the aggregated port. (if the port participates
in the aggregation, this value is true.)
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.3
hwifMirrorPort
Whether it is a mirror port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.4
hwifVLANType
port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.
Enumerationr/w
Enumerated Values:
1vLANTrunk
2access
3hybrid
4fabric
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.5
hwifMcastControl
Broadcast storm suppression with the step length of 1,
ranging from 1 to 100 percent.
In some products the step is 5, ranging from 5 to 100.
Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.6
hwifFlowControl
Flow control status.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.7
hwifSrcMacControl
Whether to filter by source MAC address.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.8
hwifClearStat
Clear all port statistics. Read operation not supported.
Enumerationr/w
Enumerated Values:
1clear
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.9
hwifXXBasePortIndex
Index number of the port and the first port index of the
device is 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.10
hwifXXDevPortIndex
Device index of the port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.11
hwifPpsMcastControl
The broadcast suppression with pps(packet per second) type.
The max value is determined by the port type and product.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.12
hwifPpsBcastDisValControl
Control the port's pps(packet per second) broadcast suppression.
When the port is enabled, its pps broadcast suppression value is the
global disperse value, and when disabled, it doesn't suppress broadcast.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.13
hwifUniSuppressionStep
The step of unicast suppression in ratio mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.14
hwifPpsUniSuppressionMax
The max pps(packet per second) value of unicast suppression
in pps mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.15
hwifMulSuppressionStep
The step of multicast suppression in ratio mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.16
hwifPpsMulSuppressionMax
The max pps(packet per second) value of multicast suppression
in pps mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.17
hwifUniSuppression
The unicast suppression with the ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifUniSuppressionStep.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.18
hwifPpsUniSuppression
The unicast suppression in pps(packet per second) mode.
The max value is determined by hwifPpsUniSuppressionMax.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.19
hwifMulSuppression
The multicast suppression with ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifMulSuppressionStep.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.20
hwifPpsMulSuppression
The multicast suppression in pps(packet per second) mode.
The max pps value is determined by hwifPpsMulSuppressionMax.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.21
hwifComboActivePort obsolete
Active port on combo interface.
Enumerationr/w
Enumerated Values:
1fiber
2copper
3na
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.22
hwifBMbpsMulSuppressionMax
The maximum value of the multicast suppression with bandwidth-based(Mbps)
that a port can be configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.23
hwifBMbpsMulSuppression
With bandwidth-based multicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the multicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsMulSuppressionMax in the entry.
The default …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.24
hwifBKbpsMulSuppressionMax
The maximum value of the multicast suppression with bandwidth-based(Kbps)
that a port can be configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.25
hwifBKbpsMulSuppressionStep
The step of multicast suppression with bandwidth-based(Kbps).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.26
hwifBKbpsMulSuppression
With bandwidth-based multicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the multicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsMulSuppressionMax in the entry.
The value of…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.27
hwifUnknownPacketDropMul
Control the port's unknown-multicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-multicast packets in inbound direction. When
outbound direction is enabled on this port, the …
DropDirectionr/w
Textual Convention: DropDirection Enumeration
Type Values:
1disable
2enableInbound
3enableOutbound
4enableBoth
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.28
hwifUnknownPacketDropUni
Control the port's unknown-unicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-unicast packets in inbound direction. When
outbound direction is enabled on this port, the port…
DropDirectionr/w
Textual Convention: DropDirection Enumeration
Type Values:
1disable
2enableInbound
3enableOutbound
4enableBoth
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.29
hwifBMbpsUniSuppressionMax
The maximum value of the unicast suppression with bandwidth-based
(Mbps) that a port can be configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.30
hwifBMbpsUniSuppression
With bandwidth-based Unicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the unicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsUniSuppressionMax in the entry.
The default valu…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.31
hwifBKbpsUniSuppressionMax
The maximum value of the unicast suppression with bandwidth-based
(Kbps) that a port can be configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.32
hwifBKbpsUniSuppressionStep
The step of unicast suppression with bandwidth-based(Kbps).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.33
hwifBKbpsUniSuppression
With bandwidth-based unicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the unicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsUniSuppressionMax in the entry.
The value of hwi…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.34
hwifOutPayloadOctets
The actual output octets of the interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.35
hwifInPayloadOctets
The actual input octets of the interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.36
hwifInErrorPktsRate
The rate of inbound error packets on the interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.37
hwifInPkts
The number of packets received on the interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.38
hwifInNormalPkts
The number of normal packets received on the interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.39
hwifOutPkts
The number of packets sent on the interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.40
.1.3.6.1.4.1.43.45.1.2.23.1.1.2 · 1 row entry · 5 columns
Port aggregation information table.
hwifAggregateEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.1.2.1
Port aggregation information table.
Indexes
hwifAggregatePortIndex
Column Syntax OID
hwifAggregatePortIndex
Index number of the main aggregated port.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
.1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.1
hwifAggregatePortName
Aggregation group name.
OctetStringr/w
Constraints:
range: 0-40
.1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.2
hwifAggregatePortListPorts
Portlist of a aggregating.
PortListr/w
Textual Convention: PortList OctetString
.1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.3
hwifAggregateModel
Load sharing mode for the port aggregation.
Enumerationr/w
Enumerated Values:
1ingress
2both
3round-robin
.1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.4
hwifAggregateOperStatus
Current operation status of the row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.5
.1.3.6.1.4.1.43.45.1.2.23.1.1.3 · 1 row entry · 5 columns
Hybrid-port configuration table.
hwifHybridPortEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.1.3.1
Hybrid-port configuration table.
Indexes
hwifHybridPortIndex
Column Syntax OID
hwifHybridPortIndex
Index number of Hybrid-port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.1
hwifHybridTaggedVlanListLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.2
hwifHybridTaggedVlanListHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.3
hwifHybridUnTaggedVlanListLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.4
hwifHybridUnTaggedVlanListHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetStringr/w
Constraints:
range: 0-256
.1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.5
.1.3.6.1.4.1.43.45.1.2.23.1.1.4 · 1 row entry · 2 columns
Combo-port table.
hwifComboPortEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.1.4.1
The entry of hwifComboPortTable.
Indexes
hwifComboPortIndex
Column Syntax OID
hwifComboPortIndex
The combo-port interface index. Its value is the same as the value
of ifIndex in ifTable, but only includes indexes of the combo-port
interfaces.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
.1.3.6.1.4.1.43.45.1.2.23.1.1.4.1.1
hwifComboPortCurActive
Current active interface of combo interfaces. The value 'fiber'
means the interface with fiber connector of the pair of combo-port
interfaces is active. The value 'copper' means the interface with
copper connector of th…
Enumerationr/w
Enumerated Values:
1fiber
2copper
3na
.1.3.6.1.4.1.43.45.1.2.23.1.1.4.1.2
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.3 · 1 row entry · 6 columns
Gvrp attributes on the VlanTrunk port.
hwifVLANTrunkStatusEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1
Gvrp attributes on the VlanTrunk port.
Indexes
hwifVLANTrunkIndex
Column Syntax OID
hwifVLANTrunkIndex
Index number of the VLANTrunk interface.
InterfaceIndex
Textual Convention: InterfaceIndex Integer32
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.1
hwifVLANTrunkGvrpRegistration
GVRP registration information
normal: This is the default configuration. Allow create, register
and unregister vlans dynamiclly at this port.
fixed: Aallow create and register vlan manually at this …
Enumerationr/w
Enumerated Values:
1normal
2fixed
3forbidden
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.2
hwifVLANTrunkPassListLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetString .1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.4
hwifVLANTrunkPassListHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetString .1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.5
hwifVLANTrunkAllowListLow
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…
OctetStringr/w .1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.6
hwifVLANTrunkAllowListHigh
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit…
OctetStringr/w .1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.7
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4 · 1 row entry · 17 columns
Ethernet port attribute table.
hwethernetEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1
Entries of Ethernet port attribute table
Indexes
No indexes recorded
Column Syntax OID
hwifEthernetDuplex
Ethernet interface mode.
Enumerationr/w
Enumerated Values:
1full
2half
3auto
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.3
hwifEthernetMTU
MTU on the Ethernet interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.4
hwifEthernetSpeed
Ethernet interface speed.
Enumerationr/w
Enumerated Values:
0auto
10s10M
100s100M
1000s1000M
10000s10000M
24000s24000M
40000s40000M
100000s100000M
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.5
hwifEthernetMdi
Type of the line connected to the port.
MDI-II (straight-through cable): 1
MDI-X (crossover cable): 2
MDI-AUTO (auto-sensing): 3
Enumerationr/w
Enumerated Values:
1mdi-ii
2mdi-x
3mdi-auto
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.7
hwMaxMacLearn
The maximum number of MAC addresses that the port can learn.
The value -1 means that the number of Mac addresses that the port
can learn is unlimited.
Integer32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.8
hwifMacAddressLearn
This object indicates if the interface is allowed to learn mac address.
eanbled(1) means the interface can learn mac address, otherwise disabled(2)
can be set.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.9
hwifEthernetTest
Test this interface.
The actual testing will be different according to products.
Read operation not supported.
Enumerationr/w
Enumerated Values:
1test
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.10
hwifMacAddrLearnMode
Status indicates mac address learn mode of the interface.
IVL(1) means independent VLAN learning.
SVL means shared VLAN learning.
Enumeration
Enumerated Values:
1iVL
2sVL
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.11
hwifEthernetFlowInterval
Set flow interval of the ethernet.
The NMS should set value to integer which is a multiple of 5.
Integer32r/w
Constraints:
range: 5-300
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.12
hwifEthernetIsolate
Isolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
with the first octet specifying isolate gro…
OctetStringr/w .1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.13
hwifVlanVPNStatus
Vlan VPN enable status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.14
hwifVlanVPNUplinkStatus
Vlan VPN uplink status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.15
hwifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value
is 0x8100.
Please refer to hwVlanVPNTPIDMode to get more information.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.16
hwifIsolateGroupID
Isolate group identifier. Value zero means this interface does not
belong to any isolate group.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.17
hwifisUplinkPort
Ethernet uplink status, default value is 2.
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.18
hwifEthernetAutoSpeedMask
This object specifies which kinds of speed mode can be negotiated.
Each bit corresponds to a kind of speed mode.

If the value of a bit is '1', it means the corresponding speed mode
is negotiable on the po…
SpeedModeFlag
Textual Convention: SpeedModeFlag Bits
Type Values:
0s10M
1s100M
2s1000M
3s10000M
4s24000M
5s40000M
6s100000M
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.19
hwifEthernetAutoSpeed
This object indicates which kinds of speed mode are negotiable
on this port.

Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding
bit of this object can be set to '1', indicating the cor…
SpeedModeFlagr/w
Textual Convention: SpeedModeFlag Bits
Type Values:
0s10M
1s100M
2s1000M
3s10000M
4s24000M
5s40000M
6s100000M
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.20
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.11 · 1 row entry · 4 columns
Isolate Group attribute table.
hwPortIsolateGroupEntry entry .1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1
The entry of hwPortIsolateGroupTable.
Indexes
hwPortIsolateGroupIndex
Column Syntax OID
hwPortIsolateGroupIndex
Port isolate group identifier.
The index of the hwPortIsolateGroupTable.
The value ranges from 1 to the limit of isolate group quantity.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.1
hwPortIsolateUplinkIfIndex
Index number of the uplink interface.
InterfaceIndexr/w
Textual Convention: InterfaceIndex Integer32
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.2
hwPortIsolateGroupRowStatus
Current operation status of the row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.3
hwPortIsolateGroupDescription
Port isolate group description, default value is zero-length string.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.4