hwifComboActivePort
A3COM-HUAWEI-LswINF-MIB ·
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.22
Object
column
obsolete
r/w
Enumeration
Active port on combo interface.
Context
- MIB
- A3COM-HUAWEI-LswINF-MIB
- OID
.1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.22- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- hwifXXEntry
- Table
- hwifXXTable
- Siblings
- 39
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | fiber |
2 | copper |
3 | na |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwifUnBoundPort Whether it is the unbound port. (true indicates that the port is
the main port of the aggregation or the port does not participate
in the aggregation.) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.1 |
| hwifXXBasePortIndex Index number of the port and the first port index of the
device is 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.10 |
| hwifXXDevPortIndex Device index of the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.11 |
| hwifPpsMcastControl The broadcast suppression with pps(packet per second) type.
The max value is determined by the port type and product. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.12 |
| hwifPpsBcastDisValControl Control the port's pps(packet per second) broadcast suppression.
When the port is enabled, its pps broadcast suppression value is the
global disperse value, and when disabled, it … | column | Enumeration | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.13 |
| hwifUniSuppressionStep The step of unicast suppression in ratio mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.14 |
| hwifPpsUniSuppressionMax The max pps(packet per second) value of unicast suppression
in pps mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.15 |
| hwifMulSuppressionStep The step of multicast suppression in ratio mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.16 |
| hwifPpsMulSuppressionMax The max pps(packet per second) value of multicast suppression
in pps mode. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.17 |
| hwifUniSuppression The unicast suppression with the ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifUniSuppressionStep. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.18 |
| hwifPpsUniSuppression The unicast suppression in pps(packet per second) mode.
The max value is determined by hwifPpsUniSuppressionMax. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.19 |
| hwifISPhyPort Whether it is a physical interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.2 |
| hwifMulSuppression The multicast suppression with ranging from 1 to 100 percent
in ratio mode.
The step is determined by hwifMulSuppressionStep. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.20 |
| hwifPpsMulSuppression The multicast suppression in pps(packet per second) mode.
The max pps value is determined by hwifPpsMulSuppressionMax. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.21 |
| hwifBMbpsMulSuppressionMax The maximum value of the multicast suppression with bandwidth-based(Mbps)
that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.23 |
| hwifBMbpsMulSuppression With bandwidth-based multicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the multicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsMulS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.24 |
| hwifBKbpsMulSuppressionMax The maximum value of the multicast suppression with bandwidth-based(Kbps)
that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.25 |
| hwifBKbpsMulSuppressionStep The step of multicast suppression with bandwidth-based(Kbps). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.26 |
| hwifBKbpsMulSuppression With bandwidth-based multicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the multicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsMulS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.27 |
| hwifUnknownPacketDropMul Control the port's unknown-multicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-multicast packets in inbound direction. When
outbound… | column | DropDirection | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.28 |
| hwifUnknownPacketDropUni Control the port's unknown-unicast packets drop. When
inbound direction is enabled on this port, the port will
drop unknown-unicast packets in inbound direction. When
outbound dir… | column | DropDirection | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.29 |
| hwifAggregatePort Whether it is the aggregated port. (if the port participates
in the aggregation, this value is true.) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.3 |
| hwifBMbpsUniSuppressionMax The maximum value of the unicast suppression with bandwidth-based
(Mbps) that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.30 |
| hwifBMbpsUniSuppression With bandwidth-based Unicast suppression, the bandwidth is measured
in Mbps.
The upper limit of the unicast suppession with bandwidth-based(Mbps)
is the value of hwifBMbpsUniSuppr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.31 |
| hwifBKbpsUniSuppressionMax The maximum value of the unicast suppression with bandwidth-based
(Kbps) that a port can be configured. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.32 |
| hwifBKbpsUniSuppressionStep The step of unicast suppression with bandwidth-based(Kbps). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.33 |
| hwifBKbpsUniSuppression With bandwidth-based unicast suppression, the bandwidth
is measured in Kbps.
The upper limit of the unicast suppession with bandwidth-based(Kbps)
is the value of hwifBKbpsUniSuppr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.34 |
| hwifOutPayloadOctets The actual output octets of the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.35 |
| hwifInPayloadOctets The actual input octets of the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.36 |
| hwifInErrorPktsRate The rate of inbound error packets on the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.37 |
| hwifInPkts The number of packets received on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.38 |
| hwifInNormalPkts The number of normal packets received on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.39 |
| hwifMirrorPort Whether it is a mirror port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.4 |
| hwifOutPkts The number of packets sent on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.40 |
| hwifVLANType port vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port. | column | Enumeration | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.5 |
| hwifMcastControl Broadcast storm suppression with the step length of 1,
ranging from 1 to 100 percent.
In some products the step is 5, ranging from 5 to 100. | column | Integer32 | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.6 |
| hwifFlowControl Flow control status. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.7 |
| hwifSrcMacControl Whether to filter by source MAC address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.8 |
| hwifClearStat Clear all port statistics. Read operation not supported. | column | Enumeration | .1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.9 |