A3COM-HUAWEI-EPON-UNI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
14
Rows
14
Columns
106
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1 · 1 row entry · 33 columns
This table defines several UNI system parameters.
h3cEponUniSysManEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1
The entry of h3cEponUniSysManTable.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniIndex
The index value which uniquely identifies the FE(fast Ethernet)
interface of the ONU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.1
h3cEponUniDescr
A textual string containing information about the interface. This
string should include the name of the manufacturer, the product name
and the version of the interface hardware and software.
OctetString .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.2
h3cEponUniAdminStatus
The desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down(2)
state. The testing(3)state indicates that no operational packets
can be passed. As a res…
Enumerationr/w
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.3
h3cEponUniMdi
Type of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing).
Enumerationr/w
Enumerated Values:
1mdi-ii
2mdi-x
3mdi-auto
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.4
h3cEponUniPriority
The priority of user network interface. If the value is larger,
the priority will be higher.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.5
h3cEponUniVlanType
UNI vlan types.
Enumerationr/w
Enumerated Values:
1vlantrunk
2access
3hybrid
4untagged
5transparent
6doubletagged
7tag
8translation
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.6
h3cEponUniAccessVlan
The vlan ID assigned to untagged frames or Priority-Tagged
frames received on user network interface.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.7
h3cEponUniTrunkPvid
PVID(port vlan ID), the vlan ID assigned to untagged frames or
Priority-Tagged frames received on user network interface.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.8
h3cEponUniVLANTrunkAllowListLow
Each octet within this value specifies a set of eight vlans,
with the first octet specifying vlans 1 through 8, the second
octet specifying vlans 9 through 16, etc. Within each octet,
the most significant bit represent…
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.9
h3cEponUniVLANTrunkAllowListHigh
Each octet within this value specifies a set of eight vlans,
with the first octet specifying vlans 2049 through 2056, the
second octet specifying vlans 2057 through 2064, etc. Within
each octet, the most significant bit…
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10
h3cEponUniInboundLineRate
The value of the inbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
h3cEponUniLineRateMax in the entry. It must be multiple
of the value of h3cEponUniLineRateStep. The default valu…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.11
h3cEponUniOutboundLineRate
The value of the outbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
h3cEponUniLineRateMax in the entry. It must be multiple
of the value of h3cEponUniLineRateStep. The default val…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.12
h3cEponUniFlowControl
Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.13
h3cEponUniSpeed
User network interface speed.
Enumerationr/w
Enumerated Values:
0auto
10s10M
100s100M
1000s1000M
10000s10000M
24000s24000M
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.14
h3cEponUniDuplex
User network interface mode.
Enumerationr/w
Enumerated Values:
1full
2half
3auto
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.15
h3cEponUniVlanVPNStatus
vlan VPN status.
true(1) - vlan VPN status enable.
false(2) - vlan VPN disable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.16
h3cEponUniCountReset
Reset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object.
Enumerationr/w
Enumerated Values:
1reset
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.17
h3cEponUniPortIsolate
enable - enable UNI port isolate setting.
disable - disable UNI port isolate setting.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.18
h3cEponUniVlanConfiguration
The vlan configuration of the related vlan mode.
Transparent vlan mode: h3cEponUniVlanConfiguration is a
zero length string.
Tag vlan mode: the first four octets were the tag
assigned to untagged frames received on UNI,…
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.23
h3cEponUniAutoNegotiation
enable - enable auto negotiation.
disable - disable auto negotiation.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.25
h3cEponUniRestartAutoNeg
Force to restart the auto negotiation process.
Enumerationr/w
Enumerated Values:
1autoNegotiation
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.26
h3cEponUniLinkStatus
The link status of UNI.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.29
h3cEponUniInterfaceType
UNI interface type.
Enumeration
Enumerated Values:
1gigabitethernetport
2fastethernetport
3voipport
4e1port
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.30
h3cEponUniVitualCableTest
True(1): Virtual cable test enable.
False(2): Virtual cable test disable.
Enumerationr/w
Enumerated Values:
1true
2false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.31
h3cEponUniVCTCableStatus
Get the cable status.
Normal(1),cable is normal.
Abnormal(2),cable is abnormal.
AbnormalOpen(3),cable is abnormal because of open circuit.
AbnormalShort(4),cable is abnormal because of short circuit.
Failure(5),cable is…
Enumeration
Enumerated Values:
1normal
2abnormal
3abnormalOpen
4abnormalShort
5failure
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.32
h3cEponUniVCTCableLength
Get the cable length.
When h3cEponUniVCTCableStatus is normal,
the node stands for the length from the UNI port to the port opposite.
When h3cEponUniVCTCableStatus is abnormal,
it stands for the lengh from the UNI port …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.33
h3cEponUniVCTImpedanceMismatch
Get the cable impedance.
Not-support(1),the UNI port does not support this function.
True(2),impedance match.
False(3),impedance mismatch.
Enumeration
Enumerated Values:
1not-support
2true
3false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.34
h3cEponUniVCTPairSkew
Get the symmetry of cable.
If the function is not supported ,
the default value 0 will be returned.
Unit:nanosecond(ns).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.35
h3cEponUniVCTPairSwap
NotSupport(1),the UNI port does not support this function.
True(2),pair swap.
False(3),not pair swap.
Enumeration
Enumerated Values:
1notSupport
2true
3false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.36
h3cEponUniVCTPolaritySwap
NotSupport(1),the UNI port does not support this function.
True(2),polarity swap.
False(3),not polarity swap.
Enumeration
Enumerated Values:
1notSupport
2true
3false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.37
h3cEponUniVCTInsertionLoss
If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.38
h3cEponUniVCTReturnLoss
If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.39
h3cEponUniVCTNearendCrosstalk
If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.40
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2 · 1 row entry · 20 columns
A list of interface counter about frames entries.
h3cEponUniCountEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1
An entry containing management information applicable
to a particular interface.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniInStatsPkts
The total number of frames (including bad frames,
broadcast frames, and multicast frames) received.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.1
h3cEponUniInStatsUnicastPkts
The total number of good frames received that are
directed to the unicast address. Note that this
does not include multicast and broadcast frames.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.2
h3cEponUniInStatsBroadcastPkts
The total number of good frames received that are
directed to the broadcast address. Note that this
does not include multicast frames.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.3
h3cEponUniInStatsMulticastPkts
The total number of good frames received that are
directed to a multicast address. Note that this number
does not include frames directed to the broadcast address.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.4
h3cEponUniInPausePkts
A count of MAC Control frames received on this
interface by the pause(flow control) operation.
This counter does not increment when the
interface is in a half-duplex mode.
Discontinuities in the value of this counter ca…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.5
h3cEponUniInTotalErrors
Total count of the error frames received on this interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.6
h3cEponUniInStatsCRCAlignErrors
The total number of frames received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.7
h3cEponUniInStatsUndersizePkts
The total number of frames received that are
less than 64 octets long (excluding framing bits,
but including FCS octets) and are otherwise well formed.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.8
h3cEponUniInStatsOversizePkts
The total number of frames received that are
longer than 1518 octets (excluding framing bits,
but including FCS octets) and are otherwise well formed.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.9
h3cEponUniInErrorbyOther
The total number of error frames received on this interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.10
h3cEponUniOutStatsPkts
The total number of frames (including bad frames,
broadcast frames, and multicast frames) sent.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.11
h3cEponUniOutStatsUnicastPkts
The total number of good frames sent that are
directed to the unicast address. Note that this
does not include multicast and broadcast frames.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.12
h3cEponUniOutStatsBroadcastPkts
The total number of good frames sent that are
directed to the broadcast address. Note that this
does not include multicast frames.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.13
h3cEponUniOutStatsMulticastPkts
The total number of good frames sent that are
directed to a multicast address. Note that this number
does not include frames directed to the broadcast address.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.14
h3cEponUniOutStatsPausePkts
The total number of MAC control frames sent on this
interface by the pause operation. This counter does
not increment when the interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.15
h3cEponUniOutTotalErrors
The total number of error frames sent on this interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.16
h3cEponUniOutStatsCollisions
The best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standar…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.17
h3cEponUniOutDelayExceededDiscards
The number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source route bridges.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.18
h3cEponUniOutErrorbyOther
The total number of other error frames sent on this interface.
Other error frames means the error frames out of collision frames
and excessive delayed frames.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.19
h3cEponUniOutDroppedFrames
The total number of frames dropped because of buffer failure.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.20
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.3 · 1 row entry · 3 columns
This table stores igmp information of UNI interface.
h3cEponUniIgmpInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1
The entry of h3cEponUniIgmpInfoTable.
Indexes
IF-MIBifIndex h3cEponUniIndex h3cEponUniMacIndex
Column Syntax OID
h3cEponUniMacIndex
The index uniquely identifies the igmp information in current
UNI interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.1
h3cEponUniIgmpMacAddress
A 6-octet read-only value carrying the individual MAC address
indicates which igmp group the UNI interface belonging to.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.2
h3cEponUniIgmpVlanId
An integer range from 1 to 4094 indicates the vlan which the igmp
Mac address has joined in.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.3
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6 · 1 row entry · 9 columns
UNI port policy configuration.
h3cEponUniPortPolicyEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1
The entry of h3cEponUniPortPolicyTable.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniPortPolicyStatus
enable - enable UNI upstream port policing.
disable - disable UNI upstream port policing.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.1
h3cEponUniPortPolicyCir
The committed information rate,
ranging from 1 to 102400, measured in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.2
h3cEponUniPortPolicyBucketDepth
The depth of the token bucket to tolerant the certain burst(CBS),
ranging from 0 to 65535, measured in bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.3
h3cEponUniPortPolicyExtraBurst
The extra token to permit the forwarding engine to finish the packet
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
measured in bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.4
h3cEponUniPortPolicyInboundCir
The inbound committed information rate, measured in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.5
h3cEponUniPortPolicyInboundBucketDepth
The inbound depth of the token bucket to tolerant the certain burst(CBS),
ranging from 0 to 65535, measured in bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.6
h3cEponUniPortPolicyInboundExtraBurst
The inbound extra token to permit the forwarding engine to finish the packet
being sent when the bucket depth is exhausted, ranging from 0 to 65535,
measured in bytes.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.7
h3cEponUniPortPolicyOutboundCir
The outbound committed information rate, stepped by 64, measured in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.8
h3cEponUniPortPolicyOutboundPir
The outbound peak information rate, stepped by 64, measured in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.9
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.7 · 1 row entry · 4 columns
UNI multicast configuration.
h3cEponUniMulticastEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1
The entry of h3cEponUniPortPolicyTable.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniMulticastGroupNumber
The allowed multicast group number that can be handled
at the same time by UNI.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.1
h3cEponUniMulticastVlanList
The multicast vlan list.
The first two octets of the string represent the first VLAN ID;
the second two octets of the string represent the second VLAN ID,
and so on. It is a zero length string by default.
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.2
h3cEponUniMulticastStripStatus
true - strip the vlan tag of multicast packet.
false - does not strip the vlan tag of multicast packet.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.3
h3cEponUniMulticastFastleave
true(1) - fast leave of IGMP enable on ONU.
false(2) - fast leave of IGMP disable on ONU.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.4
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.8 · 1 row entry · 2 columns
UNI multicast configuration.
h3cEponUniTechAbilityEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1
The entry of h3cEponUniTechAbilityTable.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniLocalTechAbility
The local port capabilities of the UNI.
Each two octets stand for a capability of UNI:
the first two octets represent one capability and
the second two octets represent another capability,
and so on.
The capabilities li…
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1.1
h3cEponUniAdvertisedTechAbility
The advertised port capabilities of the UNI.
The capabilities list references the description of h3cEponUniLocalTechAbility.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1.2
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9 · 1 row entry · 11 columns
UNI multicast control parameters.
h3cEponUniMulticastControlEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1
The entry of the table h3cEponUniMulticastControlTable.
Indexes
IF-MIBifIndex h3cEponUniIndex h3cEponUniMulticastIndex
Column Syntax OID
h3cEponUniMulticastVlanIndex
The multicast vlan ID.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.1
h3cEponUniMulticastAddressList
The multicast address, each four octets represents a multicast address,
the address section ranging from the first four octets to the second
four octets, and the like.
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.2
h3cEponUniMulticastAccessRule
deny - deny the multicast packet.
permit - permit the multicast packet.
preview - permit the multicast packet with conditions.
Enumerationr/w
Enumerated Values:
1deny
2permit
3preview
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.3
h3cEponUniMulticastChannelLimit
The limitation of multicast preview channel number.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.4
h3cEponUniMulticastPreTimeSlice
The time slice of multicast preview.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.5
h3cEponUniMulticastPreTimes
The number of multicast preview times.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.6
h3cEponUniMulticastPreInterval
The interval between two consecutive previews, measured in minute.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.7
h3cEponUniMulticastRowStatus
The status of this table entry. The active,
createAndGo and the destory statuses are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.8
h3cEponUniMulticastIndex
The index of the entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.9
h3cEponUniMulticastSourceIpList
This list contains many source ip addresses.
Each ip address is contained in four octets.
OctetStringr/w
Constraints:
range: 0-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.10
h3cEponUniMulticastResetInterval
The interval is measured in minute.
From the last preview limitation is reached, a customer can preview again
after this interval is expired.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.11
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.10 · 1 row entry · 1 columns
The next index table.
h3cEponUniQosIndexNextEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.10.1
The entry of the table h3cEponUniQosIndexNextTable.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniQosConfIndexNext
This object contains an appropriate value to be used for
h3cEponUniQosConfIndex when creating rows in the
h3cEponUniQosConfTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.10.1.1
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11 · 1 row entry · 5 columns
UNI Qos configuration.
h3cEponUniQosConfEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1
The entry of the table h3cEponUniQosConfTable.
Indexes
IF-MIBifIndex h3cEponUniIndex h3cEponUniQosConfIndex
Column Syntax OID
h3cEponUniQosConfIndex
The rule index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.1
h3cEponUniQosConfRuleIndexNext
This object contains an appropriate value to be used for
h3cEponUniQosRuleIndex when creating rows in the
h3cEponUniQosRuleTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.2
h3cEponUniQosConfMappedQueue
The queue that the ethernet frames will be mapped.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.3
h3cEponUniQosConfMarkedPriority
Priority of the ethernet frames to be marked, which
compliant with the 802.1D user priority standard.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.4
h3cEponUniQosConfRowStatus
The status of this table entry. The active,
createAndGo and the destory statuses are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.5
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12 · 1 row entry · 6 columns
Qos sub rule of the UNI.
h3cEponUniQosRuleEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1
The entry of the table h3cEponUniQosRuleTable.
Indexes
IF-MIBifIndex h3cEponUniIndex h3cEponUniQosConfIndex h3cEponUniQosRuleIndex
Column Syntax OID
h3cEponUniQosRuleIndex
The sub rule index.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.1
h3cEponUniQosRuleSelector
The ethernet frame selector.
dstmac - based on destination MAC address.
srcmac - based on source MAC address.
ethernetpriority - based on ethernet priority.
vlanid - based on VLAN ID.
ethernettype - based on ethernet t…
Enumerationr/w
Enumerated Values:
1dstmac
2srcmac
3ethernetpriority
4vlanid
5ethernettype
6dstip
7srcip
8ipprototype
9ipv4tosdscp
10ipv6precedence
11srcport
12dstport
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.2
h3cEponUniQosRuleValue
The rule value based on the h3cEponUniQosRuleSelector.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.3
h3cEponUniQosRuleMacAddress
MAC Address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.4
h3cEponUniQosRuleOperator
nervermatch - value never match.
equal - field equal to the value.
notequal - field not equal to the value.
lessthanequal - field less than or equal to the value.
greaterthanequal - field greater than or equal to the va…
Enumerationr/w
Enumerated Values:
1nevermatch
2equal
3notequal
4lessthanequal
5greaterthanequal
6fieldexist
7fieldnotexist
8alwaysmatch
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.5
h3cEponUniQosRuleRowStatus
The status of this table entry. Only active,
createAndGo and the destory are supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.6
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.13 · 1 row entry · 5 columns
Qos sub rule of the UNI.
h3cEponUniMirrorGroupEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1
The entry of the h3cEponUniMirrorGroupTable.
Indexes
IF-MIBifIndex h3cEponUniMirrorGroupID
Column Syntax OID
h3cEponUniMirrorGroupID
Epon UNI mirror group ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.1
h3cEponUniMirrorInboundPortList
UNI inbound port list.
Each octet within this value specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each octet,
the most si…
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2
h3cEponUniMirrorOutboundPortList
UNI outnbound port list, more infomation reference h3cEponUniMirrorInboundPortList
OctetStringr/w .1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.3
h3cEponUniMonitorPort
UNI monitor port.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.4
h3cEponUniMirrorRowStatus
RowStatus, Now support three status: createAndGo, active, destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.5
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.14 · 1 row entry · 1 columns
The next index table, which is used by h3cEponUniMirrorGroupTable.
h3cEponUniMirrorGroupIdNextEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.14.1
The entry of the table h3cEponUniMirrorGroupIdNextEntry.
Indexes
IF-MIBifIndex
Column Syntax OID
h3cEponUniMirrorGroupIDNext
This object contains an appropriate value to be used for
h3cEponUniMirrorGroupID when creating rows in the
h3cEponUniMirrorGroupTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.14.1.1
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15 · 1 row entry · 5 columns
UNI multicast information which is active .
h3cEponUniMulticastCtrlInfoEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1
The entry of the table h3cEponUniMulticastCtrlInfoTable.
Indexes
IF-MIBifIndex h3cEponUniIndex h3cEponUniMultActVlan h3cEponUniMultActAddress
Column Syntax OID
h3cEponUniMultActVlan
The multicast vlan ID which is active.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.1
h3cEponUniMultActAddress
The multicast address which is active.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.2
h3cEponUniMultActAccessRule
deny - deny the multicast packet.
permit - permit the multicast packet.
preview - permit the multicast packet with conditions.
Enumeration
Enumerated Values:
1deny
2permit
3preview
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.3
h3cEponUniMultActPreTimes
The number of multicast preview times which is active.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.4
h3cEponUniMultActPreRemain
The remanent time slice of multicast preview which is active.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.5
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.16 · 1 row entry · 1 columns
The next index table, which is used by h3cEponUniMulticastControlTable.
h3cEponUniMulticastIndexNextEntry entry .1.3.6.1.4.1.43.45.1.10.2.42.5.1.16.1
The entry of the table h3cEponUniMulticastIndexNextEntry.
Indexes
IF-MIBifIndex h3cEponUniIndex
Column Syntax OID
h3cEponUniMulticastConfIndexNext
This object contains an appropriate value to be used for
h3cEponUniMulticastIndex when creating rows in the
h3cEponUniMulticastControlTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.16.1.1