h3cEponUniVCTCableLength
A3COM-HUAWEI-EPON-UNI-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.33
Object
column
SNMPv2-SMIInteger32
Get the cable length. When h3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When h3cEponUniVCTCableStatus is abnormal, it stands for the lengh from the UNI port to the failure place. Unit:meter(m).
Context
- MIB
- A3COM-HUAWEI-EPON-UNI-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.33- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cEponUniSysManEntry
- Table
- h3cEponUniSysManTable
- Siblings
- 32
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cEponUniIndex The index value which uniquely identifies the FE(fast Ethernet)
interface of the ONU. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.1 |
| h3cEponUniVLANTrunkAllowListHigh Each octet within this value specifies a set of eight vlans,
with the first octet specifying vlans 2049 through 2056, the
second octet specifying vlans 2057 through 2064, etc. Wit… | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10 |
| h3cEponUniInboundLineRate The value of the inbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
h3cEponUniLineRateMax in the entry. It must be multiple
of the value of … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.11 |
| h3cEponUniOutboundLineRate The value of the outbound line-rate. measured with kbps.
The upper limit of the line-rate is the value of
h3cEponUniLineRateMax in the entry. It must be multiple
of the value of … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.12 |
| h3cEponUniFlowControl Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.13 |
| h3cEponUniSpeed User network interface speed. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.14 |
| h3cEponUniDuplex User network interface mode. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.15 |
| h3cEponUniVlanVPNStatus vlan VPN status.
true(1) - vlan VPN status enable.
false(2) - vlan VPN disable. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.16 |
| h3cEponUniCountReset Reset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.17 |
| h3cEponUniPortIsolate enable - enable UNI port isolate setting.
disable - disable UNI port isolate setting. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.18 |
| h3cEponUniDescr A textual string containing information about the interface. This
string should include the name of the manufacturer, the product name
and the version of the interface hardware a… | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.2 |
| h3cEponUniVlanConfiguration The vlan configuration of the related vlan mode.
Transparent vlan mode: h3cEponUniVlanConfiguration is a
zero length string.
Tag vlan mode: the first four octets were the tag
assi… | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.23 |
| h3cEponUniAutoNegotiation enable - enable auto negotiation.
disable - disable auto negotiation. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.25 |
| h3cEponUniRestartAutoNeg Force to restart the auto negotiation process. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.26 |
| h3cEponUniLinkStatus The link status of UNI. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.29 |
| h3cEponUniAdminStatus The desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down(2)
state. The testing(3)state indicates that no ope… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.3 |
| h3cEponUniInterfaceType UNI interface type. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.30 |
| h3cEponUniVitualCableTest True(1): Virtual cable test enable.
False(2): Virtual cable test disable. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.31 |
| h3cEponUniVCTCableStatus Get the cable status.
Normal(1),cable is normal.
Abnormal(2),cable is abnormal.
AbnormalOpen(3),cable is abnormal because of open circuit.
AbnormalShort(4),cable is abnormal becau… | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.32 |
| h3cEponUniVCTImpedanceMismatch Get the cable impedance.
Not-support(1),the UNI port does not support this function.
True(2),impedance match.
False(3),impedance mismatch. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.34 |
| h3cEponUniVCTPairSkew Get the symmetry of cable.
If the function is not supported ,
the default value 0 will be returned.
Unit:nanosecond(ns). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.35 |
| h3cEponUniVCTPairSwap NotSupport(1),the UNI port does not support this function.
True(2),pair swap.
False(3),not pair swap. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.36 |
| h3cEponUniVCTPolaritySwap NotSupport(1),the UNI port does not support this function.
True(2),polarity swap.
False(3),not polarity swap. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.37 |
| h3cEponUniVCTInsertionLoss If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.38 |
| h3cEponUniVCTReturnLoss If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.39 |
| h3cEponUniMdi Type of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing). | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.4 |
| h3cEponUniVCTNearendCrosstalk If the function is not supported ,
the default value 0 will be returned.
Unit:decibel(db). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.40 |
| h3cEponUniPriority The priority of user network interface. If the value is larger,
the priority will be higher. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.5 |
| h3cEponUniVlanType UNI vlan types. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.6 |
| h3cEponUniAccessVlan The vlan ID assigned to untagged frames or Priority-Tagged
frames received on user network interface. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.7 |
| h3cEponUniTrunkPvid PVID(port vlan ID), the vlan ID assigned to untagged frames or
Priority-Tagged frames received on user network interface. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.8 |
| h3cEponUniVLANTrunkAllowListLow Each octet within this value specifies a set of eight vlans,
with the first octet specifying vlans 1 through 8, the second
octet specifying vlans 9 through 16, etc. Within each o… | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.9 |