Standard view Table view

A3COM-HUAWEI-DOT11-ACMT-MIB

        This MIB defines information as per wireless AC and tunnel between
AP and AC.
If NMS intends to get more detailed information for the AP and AC,
it could refer entPhysicalIndex in the Entity MIB to get entity
information.
        
GLOSSARY
        
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
        
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
        
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
        
Radio
The chip set to receive and send wireless signal.
        
Fat AP
Applied in the home, SOHO and so on, and it could
independently work without help from AC.
        
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
        
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
        
Basic Service Set
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP. It will
be identified by BSSID.
h3cDot11ACMT 1.3.6.1.4.1.43.45.1.10.2.75.1
Imported Objects
A3COM-HUAWEI-DOT11-REF-MIB h3cDot11 H3cDot11MACModeType H3cDot11ObjectIDType H3cDot11TunnelSecSchemType
IANAifType-MIB IANAifType
SNMPv2-SMI Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
Objects (75)
h3cDot11ACMT .1.3.6.1.4.1.43.45.1.10.2.75.1
h3cDot11ACObjectGroup .1.3.6.1.4.1.43.45.1.10.2.75.1.1
h3cDot11ACObject .1.3.6.1.4.1.43.45.1.10.2.75.1.1.1
h3cDot11CurrentACMACMode A3COM-HUAWEI-DOT11-REF-MIBH3cDot11MACModeType .1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.1
h3cDot11MaxAPNumPermitted Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.2
h3cDot11MaxStationNumPermitted Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.1.3
h3cDot11ACLoadInfo .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2
h3cDot11APConnectCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.1
h3cDot11AcUploadFrameBytes SNMPv2-SMICounter64 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.10
h3cDot11AcDownloadFrameBytes SNMPv2-SMICounter64 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.11
h3cDot11BackupACRole Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.12
h3cDot11BackupACNMSIP SNMPv2-SMIIpAddress .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.13
h3cDot11ACBackupMode Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.14
h3cDot11ACBackupStatus Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.15
h3cDot11ACSwitchCnt Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.16
h3cDot11StationConnectCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.2
h3cDot11ACIFLoadInfoTable .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3
h3cDot11ACIFLoadInfoEntry .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1
h3cDot11ACIfIndex Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.1
h3cDot11ACIfApNum Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.2
h3cDot11ACIfStaNum Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.3
h3cDot11ACIfName OctetString .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.3.1.4
h3cDot11MasterAPCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.4
h3cDot11SlaveAPCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.5
h3cDot11ConnectAutoAPCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.6
h3cDot11PersistentAPCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.7
h3cDot11AcUploadFrameCnt SNMPv2-SMICounter64 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.8
h3cDot11AcDownloadFrameCnt SNMPv2-SMICounter64 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.2.9
h3cDot11WLANAssocStatisInfo .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3
h3cDot11StationAssocSum SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.1
h3cDot11StationAssocFailSum SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.2
h3cDot11StationReassocSum SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.3
h3cDot11StationAssocRejectedSum SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.4
h3cDot11StationExDeAuthenSum SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.5
h3cDot11StationCurAssocSum Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.3.6
h3cDot11ACBASInfo .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4
h3cDot11ACBASSysObjects .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.1
h3cDot11ACBASTableObjects .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2
h3cDot11ACBASIfTable .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3
h3cDot11ACBASIfEntry .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1
h3cDot11ACBASIfIndex Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.1
h3cDot11ACBASIfDescr OctetString .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.2
h3cDot11ACBASIfType IANAifType-MIBIANAifType .1.3.6.1.4.1.43.45.1.10.2.75.1.1.4.2.3.1.3
h3cDot11ACStaUserSecAuthStatis .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5
h3cDot11ACStaUserAuthCurNumber Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.1
h3cDot11ACStaUserConnFailCnt SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.2
h3cDot11ACStaUserAuthReqCnt SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.3
h3cDot11ACStaUserAuthSuccCnt SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.4
h3cDot11ACStaUserAuthFailCnt SNMPv2-SMICounter32 .1.3.6.1.4.1.43.45.1.10.2.75.1.1.5.5
h3cDot11CAPWAPTunnelGroup .1.3.6.1.4.1.43.45.1.10.2.75.1.2
h3cDot11CAPWAPTunnelTable .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1
h3cDot11CAPWAPTunnelEntry .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1
h3cDot11CurrTunnelAPID A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ObjectIDType .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.1
h3cDot11CtrlTunnelCurrSec A3COM-HUAWEI-DOT11-REF-MIBH3cDot11TunnelSecSchemType .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.2
h3cDot11CtrlTunnelUpTime secondInteger32 .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.3
h3cDot11DataTunnelCurrSec A3COM-HUAWEI-DOT11-REF-MIBH3cDot11TunnelSecSchemType .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.4
h3cDot11DataTunnelUpTime secondInteger32 .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.5
h3cDot11CtrlTunnelUpTimeTicks SNMPv2-SMITimeTicks .1.3.6.1.4.1.43.45.1.10.2.75.1.2.1.1.6
h3cDot11ACMtNotifyGroup .1.3.6.1.4.1.43.45.1.10.2.75.1.3
h3cDot11ACMtTraps .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0
h3cDot11ACMtTrapVarObjects .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1
h3cDot11ACMtTrapTunlDwnInfo Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.1
h3cDot11ACMaxStaNum Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.10
h3cDot11ACMtTrapTnlAPSysName OctetString .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.11
h3cDot11ACMtFirstTrapTime SNMPv2-SMITimeTicks .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.12
h3cDot11ACStatusSwitchInfo Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.13
h3cDot11SourceACNmsIP SNMPv2-SMIIpAddress .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.14
h3cDot11ACMtTrapTunlUpInfo Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.2
h3cDot11ACMtTrapBackupSwitchInfo Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.3
h3cDot11ACMtTrapTnlAPName OctetString .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.4
h3cDot11ACMtTrapTnlAPIPAddr SNMPv2-SMIIpAddress .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.5
h3cDot11LoadBalanceType Enumeration .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.6
h3cDot11LoadBalanceThreshold Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.7
h3cDot11ACMtTrapAPIPv6Addr OctetString .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.8
h3cDot11ACMtTrapTunlDwnCount Integer32 .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.9
Notifications / Traps (6)
NameOIDDescription
h3cDot11ACMtTunnelSetupTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.1 
This notification is sent by AC when CAPWAP tunnel becomes up.
By this way, NMS will immediately know tunnel up event.
It is unnecessary to identify whether it is control or data
tunnel.
h3cDot11ACMtTunnelDownTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.2 
This notification is sent by AC when CAPWAP tunnel becomes down.
By this way, NMS will immediately know tunnel down event.
It is unnecessary to identify whether it is control or data
tunnel.
h3cDot11ACMtBackupSwtTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.3 
This trap is sent by AC when AC switches from master to slave
or from slave to master.
h3cDot11ACLoadBalanceTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.4 
This trap is sent by AC when load-balance is enabled on AC.
h3cDot11ACStaFullTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.5 
This notification will be sent when STA is full on AC.
h3cDot11ACStatusSwitchTrap .1.3.6.1.4.1.43.45.1.10.2.75.1.3.0.6 
This notification will be sent when AC switchs from standby to active
or from standby to active.