h3cDot11ACMtTrapTunlDwnInfo
A3COM-HUAWEI-DOT11-ACMT-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.1
Object
scalar
Enumeration
Represents the reason for tunnel down. The following values are supported: tunnelTimeout(1), - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure(2), - rekey process is failed, tunnel will - be broken. apReset(3), - Administrator reset AP. apCrash(4), - AP reboot for system crash. apDeleted(5) - Delete AP from AC and trigger - tunnel down. apCfgChange(6) - The configuration for AP was changed.
Context
- MIB
- A3COM-HUAWEI-DOT11-ACMT-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.1- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- h3cDot11ACMtTrapVarObjects
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11ACMaxStaNum Represents the max number of STA on AC. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.10 |
| h3cDot11ACMtTrapTnlAPSysName Represents system name of the AP which sets up the tunnel with the AC. | scalar | OctetString | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.11 |
| h3cDot11ACMtFirstTrapTime Represents the first trap time. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.12 |
| h3cDot11ACStatusSwitchInfo Represents status which the AC switches to.
The following values are supported:
activeToStandby - The AC switches from active to standby.
standbyToActive - The AC switches from … | scalar | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.13 |
| h3cDot11SourceACNmsIP Represents the NMS IP address of master AC. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.14 |
| h3cDot11ACMtTrapTunlUpInfo Represents the reason for tunnel up.
The following values are supported:
up(1) - The AP joined AC. | scalar | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.2 |
| h3cDot11ACMtTrapBackupSwitchInfo Represents status which the AC switches to.
The following values are supported:
masterToSlave - The AC switches from master to slave.
slaveToMaster - The AC switches from slave … | scalar | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.3 |
| h3cDot11ACMtTrapTnlAPName Represents name of the AP which sets up the tunnel with the AC. | scalar | OctetString | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.4 |
| h3cDot11ACMtTrapTnlAPIPAddr Represents IP address of the AP which sets up the tunnel with the AC. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.5 |
| h3cDot11LoadBalanceType Represents which kind load balance is enabled by AC.
The following values are supported:
traffic mode load-balancing: traffic snapshot is considered.
session mode load-balancing: … | scalar | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.6 |
| h3cDot11LoadBalanceThreshold Represents the value of load balance threshold. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.7 |
| h3cDot11ACMtTrapAPIPv6Addr Represents IPv6 address of the AP which sets up the tunnel with
the AC. | scalar | OctetString | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.8 |
| h3cDot11ACMtTrapTunlDwnCount Reprsents how many times that the tunnel between AC and AP has down. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.1.3.1.9 |