zhoneVaIfEMTimingMaxDelayDuration
Zhone-VOICE-ANALOG-IF-MIB ·
.1.3.6.1.4.1.5504.5.6.4.3.1.9
Object
column
r/w
milliseconds Integer32
Maximum time to wait from outgoing seizure to out-dialing digits. If the far end does not allow to send digits after the duration specified in the object, a reorder tone will be sent to the calling party. The default value of this object is 2000 milliseconds.
Context
- MIB
- Zhone-VOICE-ANALOG-IF-MIB
- OID
.1.3.6.1.4.1.5504.5.6.4.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- zhoneVaIfEMTimingEntry
- Table
- zhoneVaIfEMTimingTable
- Siblings
- 9
Syntax
milliseconds Integer32
Values & Constraints
Object Constraints
range: 100-5000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneVaIfEMTimingDigitDuration Outgoing DTMF digit duration in milliseconds.
The default value of this object is 100 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.1 |
| zhoneVaIfEMTimingMinDelayPulseWidth Minimum delay-dial pulse duration for incoming call.
If the value of this object is 0, then no delay-dial
is sent to the far end for the incoming call.
The default value of this o… | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.10 |
| zhoneVaIfEMTimingInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds.
The default value of this object is 100 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.2 |
| zhoneVaIfEMTimingPulseRate Outgoing pulse dialing rate in pulses per second (pps).
The default value of this object is 10 pps. | column | pps Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.3 |
| zhoneVaIfEMTimingPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds.
The default value of this object is 500 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.4 |
| zhoneVaIfEMTimingClearWaitDuration Time of Inactive seizure signal to declare call cleared.
The default value of this object is 400 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.5 |
| zhoneVaIfEMTimingMaxWinkWaitDuration Maximum time to wait from the outgoing seizure of the line
to the time of sending out a wink-pulse.
The default value of this object is 200 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.6 |
| zhoneVaIfEMTimingMaxWinkDuration Maximum outgoing wink duration (between the wink-pulse leading
edge and trailing edge) for wink start signaling.
The default value of this object is 200 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.7 |
| zhoneVaIfEMTimingDelayStart Minimum time to wait from outgoing seizure to
out-dialing digits for delay start signaling.
The default value of this object is 300 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.5504.5.6.4.3.1.8 |