zhoneVaIfCfgEntry
Zhone-VOICE-ANALOG-IF-MIB ·
.1.3.6.1.4.1.5504.5.6.1.1.1
Object
row
An entry in the configuration table for each voice analog interface. The entry is created when the voice analog hardware is detected.
Context
- MIB
- Zhone-VOICE-ANALOG-IF-MIB
- OID
.1.3.6.1.4.1.5504.5.6.1.1.1- Type
- row
- Status
- current
- Parent
- zhoneVaIfCfgTable
- Table
- zhoneVaIfCfgTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneVaIfCfgImpedance Specifies the terminating impedance of voice analog
interfaces.
other - none of the following; arbitrary,
within limits, for special cases.
ohms600Real … | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.1 |
| zhoneVaIfCfgReceiveTLPNum Receive Transmission Level Point (RTLP) settings control the amount gain or loss added to the incoming signal after it is decoded to analog.
to incrase the signal level set the R… | column | dB/10 Integer32 | .1.3.6.1.4.1.5504.5.6.1.1.1.10 |
| zhoneVaIfCfgTransmitTLPNum Transmit Transmission Level Point controls the amount of gain or loss added
to a voice signal from CPE before it is encoded to digital PCM.
To increase the signal level, reduce … | column | dB/10 Integer32 | .1.3.6.1.4.1.5504.5.6.1.1.1.11 |
| zhoneVaIfCfgLoopCurrent To set the loop current value for a subscriber | column | mA Integer32 | .1.3.6.1.4.1.5504.5.6.1.1.1.12 |
| zhoneVaIfCfgRingVoltage To set the ring voltage for a subscriber. | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.13 |
| zhoneVaIfCfgReceiveTLP Receive Transmission Level Point (RTLP) settings control the amount gain or loss added to the incoming signal after it is decoded to analog.
to increase the signal level set the… | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.2 |
| zhoneVaIfCfgTransmitTLP In case of FXO, it specifies FXO attenuation and default value is 0dB(fxsTtlp0db).
In case of FXS this setting controls the amount of gain or loss added
to a voice signal from … | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.3 |
| zhoneVaIfCfgTrunkConditioning The trunk conditioning setting specifies whether the FXS/FXO port should send the idle pattern to the network upon declaration of a Carrier Group Alarm(CGA) on the WAN link to whi… | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.4 |
| zhoneVaIfCfgLineType The Card type FXS, FXO, EM, EBS.
Entries in the table will be created or deleted on the basis of zhoneVaIfCfgLineType
in the zhoneVaIfCfgTable and we are not using rowStatus ent… | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.5 |
| zhoneVaIfCfgIntegratedDSP Indicates whether the interface has an integrated
Digital Signal processing (DSP) unit. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.6.1.1.1.6 |
| zhoneVaIfCfgLineCapabilities The Interface types supported on this interface. This is a bit-map of possible
types. This variable can be used to determine zhoneVaIfCfgLineType. | column | Bits | .1.3.6.1.4.1.5504.5.6.1.1.1.7 |
| zhoneVaIfCfgMaintenanceMode Indicates the maintenance modes of the Analog voice interface.
loopback options for Fxo and Fxs cards (Zhone specific)
… | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.8 |
| zhoneVaIfCfgPCMEncoding alaw(1) :for E1
mulaw(2) : for T1 | column | Enumeration | .1.3.6.1.4.1.5504.5.6.1.1.1.9 |