zyRemotePortMirrorSourceReflectorPort
ZYXEL-REMOTE-PORT-MIRROR-MIB ·
.1.3.6.1.4.1.890.1.15.3.73.1.2.1.6
Object
column
r/w
Integer32
Set port members to be the source reflector-port. The reflector port is the mechanism that copies packets onto an remote mirror VLAN. The reflector port forwards only traffic from remote mirror VLAN with which it is affiliated: 1. A reflector-port is only existed in source switch. 2. Spanning tree is automatically disabled on a reflector-port. 3. It is a port set to loopback. 4. The reflector port loops back untagged traffic to the switch. The traffic is then placed on the RSPAN VLAN and flooded to any trunk ports that carry the RSPAN VLAN. 5. The reflector-port can not be mirror-port and monitor-port.
Context
- MIB
- ZYXEL-REMOTE-PORT-MIRROR-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.73.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zyxelRemotePortMirrorEntry
- Table
- zyxelRemotePortMirrorTable
- Siblings
- 9
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyRemotePortMirrorVid Enter the VLAN ID (1 to 4094) of the remote mirror VLAN. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.1 |
| zyRemotePortMirrorRowStatus This object allows entries to be created and deleted from the remote mirror table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.10 |
| zyRemotePortMirrorSource8021pPriority Select a priority level (0-7) with which the Switch replaces the priority of packets from source
port (belonging to this remote mirror VLAN). | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.2 |
| zyRemotePortMirrorSourceIngressMirrorPorts Set port members to be the source ingress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any po… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.3 |
| zyRemotePortMirrorSourceEgressMirrorPorts Set port members to be the source egress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any por… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.4 |
| zyRemotePortMirrorSourceReflectorPortState Enable/disable multi-mirroring on RMirror Source.
Once the multi-mirroring is enabled, the reflector-port can be used in the RMirrore Source. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.5 |
| zyRemotePortMirrorDestinationMonitorPort Set the port number of the destination monitor port.
The monitor-port is the port that we can monitor the RMirror traffic:
1. A monitor-port is only in destination switch.
2. It… | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.7 |
| zyRemotePortMirrorDestinationMonitorPortTagging Enable/Disable the destination monitor port which packet with tag. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.8 |
| zyRemotePortMirrorConnectedPorts Set port members to be the connected-port.
The connected-port is the physical port connected to other switch in the same remote mirror VLAN:
1. The port must join the remote mirr… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.890.1.15.3.73.1.2.1.9 |