ZYXEL-REMOTE-PORT-MIRROR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

zyxelRemotePortMirrorTable

table
.1.3.6.1.4.1.890.1.15.3.73.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the zyxel variant from /opt/observium/mibs/zyxel.
Command help
Walk zyxelRemotePortMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-REMOTE-PORT-MIRROR-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-REMOTE-PORT-MIRROR-MIB::zyxelRemotePortMirrorTable' 
The table contains remote port mirror configuration.
zyxelRemotePortMirrorEntry row .1.3.6.1.4.1.890.1.15.3.73.1.2.1
An entry contains remote port mirror configuration.
Indexes
Column Syntax OID
zyRemotePortMirrorVid
Enter the VLAN ID (1 to 4094) of the remote mirror VLAN.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.1
zyRemotePortMirrorSource8021pPriority
Select a priority level (0-7) with which the Switch replaces the priority of packets from source
port (belonging to this remote mirror VLAN).
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.2
zyRemotePortMirrorSourceIngressMirrorPorts
Set port members to be the source ingress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any port type, such as Ether Channel, Fast Eth…
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.890.1.15.3.73.1.2.1.3
zyRemotePortMirrorSourceEgressMirrorPorts
Set port members to be the source egress mirror-port.
The mirror-port is the port traffic that we mirrored:
1. Mirror-ports is only existed in source switch.
2. It can be any port type, such as Ether Channel, Fast Ethe…
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.890.1.15.3.73.1.2.1.4
zyRemotePortMirrorSourceReflectorPortState
Enable/disable multi-mirroring on RMirror Source.
Once the multi-mirroring is enabled, the reflector-port can be used in the RMirrore Source.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.5
zyRemotePortMirrorSourceReflectorPort
Set port members to be the source reflector-port.
The reflector port is the mechanism that copies packets onto an remote mirror VLAN.
The reflector port forwards only traffic from remote mirror VLAN with which it is a…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.6
zyRemotePortMirrorDestinationMonitorPort
Set the port number of the destination monitor port.
The monitor-port is the port that we can monitor the RMirror traffic:
1. A monitor-port is only in destination switch.
2. It can participate in only one RMirror VLA…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.7
zyRemotePortMirrorDestinationMonitorPortTagging
Enable/Disable the destination monitor port which packet with tag.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.8
zyRemotePortMirrorConnectedPorts
Set port members to be the connected-port.
The connected-port is the physical port connected to other switch in the same remote mirror VLAN:
1. The port must join the remote mirror VLAN.
2. The connected-port can not b…
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.890.1.15.3.73.1.2.1.9
zyRemotePortMirrorRowStatus
This object allows entries to be created and deleted from the remote mirror table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.890.1.15.3.73.1.2.1.10