zyPortAuthenticationPortGuestVlanState
ZYXEL-PORT-AUTHENTICATION-MIB ·
.1.3.6.1.4.1.890.1.15.3.62.1.2.1.8
Object
Enable/Disable Guest VLAN on the port. Clients that fail authentication are placed in the guest VLAN and can receive limited services.
Context
- MIB
- ZYXEL-PORT-AUTHENTICATION-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.62.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zyxelPortAuthenticationPortEntry
- Table
- zyxelPortAuthenticationPortTable
- Siblings
- 11
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyPortAuthenticationPortState Enable/Disable 802.1x port authentication on the port. You must first allow 802.1x authentication on
the Switch before configuring it on each port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.1 |
| zyPortAuthenticationPortGuestVlanHostMode Specify how the Switch authenticates users when more than one user connect to the port (using a hub).
Select Multi-Host to authenticate only the first user that connects to this … | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.10 |
| zyPortAuthenticationPortGuestVlanHostModeMultiSecureNumber If you set Host-mode to Multi-Secure, specify the maximum number of users that the
Switch will authenticate on this port. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.11 |
| zyPortAuthenticationPortCompoundAuthenticationMode Set compound authentication mode at strict mode or loose mode for the switch. Users can use this setting
to choise authentication strict or loose of 802.1x and mac authentication. | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.12 |
| zyPortReAuthenticationPortState Enable/Disable 802.1x port re-authentication on the port. Specify if a subscriber has to periodically
re-enter his or her username and password to stay connected to the port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.2 |
| zyPortReAuthenticationPortTimer Specify the length of time required to pass before a client has to re-enter his or her username and
password to stay connected to the port. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.3 |
| zyPortAuthenticationPortQuietPeriod Specify the number of seconds the port remains in the HELD state and rejects further authentication
requests from the connected client after a failed authentication exchange. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.4 |
| zyPortAuthenticationPortTxPeriod Specify the number of seconds the Switch waits for client's response before re-sending an identity
request to the client. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.5 |
| zyPortAuthenticationPortSupplicantTimeout Specify the number of seconds the Switch waits for client's response to a challenge request before
sending another request. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.6 |
| zyPortAuthenticationPortMaxRequest Specify the number of times the Switch tries to authenticate client(s) before sending unresponsive
ports to the Guest VLAN. This is set to 2 by default. That is, the Switch attem… | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.7 |
| zyPortAuthenticationPortGuestVlan Enter the number that identifies the guest VLAN. Make sure this is a VLAN recognized in your network.
A guest VLAN is a pre-configured VLAN on the Switch that allows non-authenti… | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.9 |