zyPortAuthenticationPortGuestVlanHostMode
ZYXEL-PORT-AUTHENTICATION-MIB ·
.1.3.6.1.4.1.890.1.15.3.62.1.2.1.10
Object
column
r/w
Enumeration
Specify how the Switch authenticates users when more than one user connect to the port (using a hub). Select Multi-Host to authenticate only the first user that connects to this port. If the first user enters the correct credential, any other users are allowed to access the port without authentication. If the first user fails to enter the correct credential, they are all put in the guest VLAN. Once the first user who did authentication logs out or disconnects from the port, rest of the users are blocked until a user does the authentication process again. Select Multi-Secure to authenticate each user that connects to this port.
Context
- MIB
- ZYXEL-PORT-AUTHENTICATION-MIB
- OID
.1.3.6.1.4.1.890.1.15.3.62.1.2.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zyxelPortAuthenticationPortEntry
- Table
- zyxelPortAuthenticationPortTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | multiHost |
1 | multiSecure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zyPortAuthenticationPortState Enable/Disable 802.1x port authentication on the port. You must first allow 802.1x authentication on
the Switch before configuring it on each port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.1 |
| zyPortAuthenticationPortGuestVlanHostModeMultiSecureNumber If you set Host-mode to Multi-Secure, specify the maximum number of users that the
Switch will authenticate on this port. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.11 |
| zyPortAuthenticationPortCompoundAuthenticationMode Set compound authentication mode at strict mode or loose mode for the switch. Users can use this setting
to choise authentication strict or loose of 802.1x and mac authentication. | column | Enumeration | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.12 |
| zyPortReAuthenticationPortState Enable/Disable 802.1x port re-authentication on the port. Specify if a subscriber has to periodically
re-enter his or her username and password to stay connected to the port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.2 |
| zyPortReAuthenticationPortTimer Specify the length of time required to pass before a client has to re-enter his or her username and
password to stay connected to the port. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.3 |
| zyPortAuthenticationPortQuietPeriod Specify the number of seconds the port remains in the HELD state and rejects further authentication
requests from the connected client after a failed authentication exchange. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.4 |
| zyPortAuthenticationPortTxPeriod Specify the number of seconds the Switch waits for client's response before re-sending an identity
request to the client. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.5 |
| zyPortAuthenticationPortSupplicantTimeout Specify the number of seconds the Switch waits for client's response to a challenge request before
sending another request. | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.6 |
| zyPortAuthenticationPortMaxRequest Specify the number of times the Switch tries to authenticate client(s) before sending unresponsive
ports to the Guest VLAN. This is set to 2 by default. That is, the Switch attem… | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.7 |
| zyPortAuthenticationPortGuestVlanState Enable/Disable Guest VLAN on the port. Clients that fail authentication are placed in the guest VLAN
and can receive limited services. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.8 |
| zyPortAuthenticationPortGuestVlan Enter the number that identifies the guest VLAN. Make sure this is a VLAN recognized in your network.
A guest VLAN is a pre-configured VLAN on the Switch that allows non-authenti… | column | Integer32 | .1.3.6.1.4.1.890.1.15.3.62.1.2.1.9 |