zyPortAuthenticationPortGuestVlan

ZYXEL-PORT-AUTHENTICATION-MIB · .1.3.6.1.4.1.890.1.15.3.62.1.2.1.9
MIB view Table view

Object

column r/w Integer32 
Enter the number that identifies the guest VLAN. Make sure this is a VLAN recognized in your network. 
A guest VLAN is a pre-configured VLAN on the Switch that allows non-authenticated users to access 
limited network resources through the Switch. You must also enable IEEE 802.1x authentication on the 
Switch and the associated ports.

Context

MIB
ZYXEL-PORT-AUTHENTICATION-MIB
OID
.1.3.6.1.4.1.890.1.15.3.62.1.2.1.9
Type
column
Access
readwrite
Status
current
Parent
zyxelPortAuthenticationPortEntry
Table
zyxelPortAuthenticationPortTable
Siblings
11

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zyPortAuthenticationPortState
Enable/Disable 802.1x port authentication on the port. You must first allow 802.1x authentication on the Switch before configuring it on each port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.890.1.15.3.62.1.2.1.1
zyPortAuthenticationPortGuestVlanHostMode
Specify how the Switch authenticates users when more than one user connect to the port (using a hub). Select Multi-Host to authenticate only the first user that connects to this …
columnEnumeration.1.3.6.1.4.1.890.1.15.3.62.1.2.1.10
zyPortAuthenticationPortGuestVlanHostModeMultiSecureNumber
If you set Host-mode to Multi-Secure, specify the maximum number of users that the Switch will authenticate on this port.
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.11
zyPortAuthenticationPortCompoundAuthenticationMode
Set compound authentication mode at strict mode or loose mode for the switch. Users can use this setting to choise authentication strict or loose of 802.1x and mac authentication.
columnEnumeration.1.3.6.1.4.1.890.1.15.3.62.1.2.1.12
zyPortReAuthenticationPortState
Enable/Disable 802.1x port re-authentication on the port. Specify if a subscriber has to periodically re-enter his or her username and password to stay connected to the port.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.890.1.15.3.62.1.2.1.2
zyPortReAuthenticationPortTimer
Specify the length of time required to pass before a client has to re-enter his or her username and password to stay connected to the port.
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.3
zyPortAuthenticationPortQuietPeriod
Specify the number of seconds the port remains in the HELD state and rejects further authentication requests from the connected client after a failed authentication exchange.
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.4
zyPortAuthenticationPortTxPeriod
Specify the number of seconds the Switch waits for client's response before re-sending an identity request to the client.
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.5
zyPortAuthenticationPortSupplicantTimeout
Specify the number of seconds the Switch waits for client's response to a challenge request before sending another request.
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.6
zyPortAuthenticationPortMaxRequest
Specify the number of times the Switch tries to authenticate client(s) before sending unresponsive ports to the Guest VLAN. This is set to 2 by default. That is, the Switch attem…
columnInteger32.1.3.6.1.4.1.890.1.15.3.62.1.2.1.7
zyPortAuthenticationPortGuestVlanState
Enable/Disable Guest VLAN on the port. Clients that fail authentication are placed in the guest VLAN and can receive limited services.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.890.1.15.3.62.1.2.1.8