mltRrg
ZYXEL-IES5000-MIB ·
.1.3.6.1.4.1.890.1.5.13.5.4.4.5.9
Object
[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set. 250000064 : 'Not Measured' reason # 2: Can't start the test when port is off-hook. 250000080 : 'Not Measured' reason # 3: Can't start the test when port is disabled or on-hook. 250000096 : 'Not Measured' reason # 4: can't start the test when port is disabled or off-hook or service state is out-of-service. 250000112 : 'Not Measured' reason # 5: can't start the test when port is disabled or off-hook. 250000128 : 'Not Measured' reason # 6: The test item will be skipped when testing all items and (vTip > 0.5Vac or vRing > 0.5Vac or abs(vTip) > 0.5Vdc or abs(vRing) > 0.5Vdc). 250000144 : 'Not Measured' reason # 7: Hardware driver do not measure this item. 2147483647 : Circuit open. 0 : Circuit short or fault.
Context
- MIB
- ZYXEL-IES5000-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.5.4.4.5.9- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- 0.1 ohm
- Parent
- mltResult
- Siblings
- 21
Syntax
0.1 ohm SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mltVacTip [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.1 |
| mltRtr [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 … | scalar | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.10 |
| mltCtg [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.11 |
| mltCrg [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.12 |
| mltCtr [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 10^-10 F SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.13 |
| mltRen [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 … | scalar | 0.1 ren SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.14 |
| mltVRing [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.15 |
| mltVMetering [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 vpeak SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.16 |
| mltDialToneDetected Value List:
1 : Yes.
2 : No.
3 : Test failed
4 : No result. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.17 |
| mltDetectedDtmfCount [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.18 |
| mltDialToneDelay [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.001 sec SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.19 |
| mltVacRing [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.2 |
| mltReceiverState [Normal Value]:
1 : On hook.
2 : Off hook.
3 : circuit short or fault.
4 : circuit open.
[Special value]:
250000016 : No resu… | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.20 |
| mltDetectedDtmfDigit The DTMF digit string be detected in MLT test. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.21 |
| mltErrorMsg The error message when fail to start MLT test. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.22 |
| mltVacDiff [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 rms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.3 |
| mltVdcTip [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.4 |
| mltVdcRing [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.5 |
| mltVdcDiff [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 volt SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.6 |
| mltRLoop [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 : 'N… | scalar | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.7 |
| mltRtg [Special value]:
250000016 : No result.
250000032 : Test failed.
250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not set.
250000064 … | scalar | 0.1 ohm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.4.4.5.8 |