adslPortOps

The managed object is for ADSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set 
the corresponding bit value to be 1. The various bit positions are:
BIT  1: enable port
BIT  2: disable port
BIT  3: set ADSL mode			 
BIT  4: set line profile
BIT  5: set alarm profile
BIT  6: enable Annex L to be narrow mode
BIT  7: enable Annex L to be wide mode
BIT  8: disable Annex L
BIT  9: enable Annex M
BIT 10: disable Annex M
BIT 11: enable Annex I
BIT 12: disable Annex I
BIT 13: set option mask
BIT 14: enable power management mode to be L2
BIT 15: enable power management mode to be L3
BIT 16: disable power management mode
BIT 17: set power mode to be fixed
BIT 18: set power mode to be priority to power
BIT 19: set power mode to be priority to rate
BIT 20: set ATU-R max Tx power
BIT 21: set ATU-C max Tx power
BIT 22: set max Rx power
BIT 23: set ATU-R carrier mask
BIT 24: set ATU-C carrier mask
BIT 25: set ATU-R INP minimum setting
BIT 26: set ATU-C INP minimum setting

MIB

ZYXEL-IES5000-MIB

OID

.1.3.6.1.4.1.890.1.5.13.5.8.2.3.2

Type

scalar

Access

readwrite

Status

current

Parent

adslPortBatchSet