zxGponPPTPEthInfoMaxFrameSize
ZXGPON-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1012.3.23.8.1.1.10
Object
column
r/w
Integer32
It denotes the maximum allowed frame size to be transmitted across this interface. It may be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT be used by any other entry.
Context
- MIB
- ZXGPON-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.23.8.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponPPTPEthUniInfoEntry
- Table
- zxGponPPTPEthUniInfoTable
- Siblings
- 15
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponPPTPEthInfoTPID An arbitrary(unique) integer for identifiying an entry in the PPTP Ethernet
information Table. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.1 |
| zxGponPPTPEthInfoDTEorDCEInd It indicates whether the Ethernet interface wiring is DTE(2) or DCE(1). It may be
created/read/written/modified.Writing or modifing can be done when the entry SHOULD
NOT be used b… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.11 |
| zxGponPPTPEthInfoPauseTime It allows the ONT line card to request that the customer terminal temporarily suspend sending
data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times of the parti… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.12 |
| zxGponPPTPEthInfoBridgedorIPInd It indicates whether the Ethernet interface is bridged or derived from an IP router function
(Bridged: 1; IP router: 2; 3: depends on Subscriber Line Card.) 3 means that the SLC(S… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.13 |
| zxGponPPTPEthInfoARC It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting
allowed immediately and on means alarm reporting inhibited, until this ONT(managed e… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.14 |
| zxGponPPTPEthInfoARCInterval It provides a provisionable length of time. Units are given in minutes. It may
be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT
be used b… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.15 |
| zxGponPPTPEthInfoPppoeFilterEnable It may be used to control filtering of PPPoE packets on this Ethernet port. The disabled is
used to disable filtering. The enabled is used to enable filtering. When filtering is e… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.16 |
| zxGponPPTPEthInfoMeId This attribute provides a unique number for each instance of this managed entity.
This 2-byte number is directly associated with the physical position of the UNI.
The first byte… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.2 |
| zxGponPPTPEthInfoExpectedType Coding Contents Description
0 no LIM Default value
1 A1.5 … | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.3 |
| zxGponPPTPEthInfoSensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type'
equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00,
then the … | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.4 |
| zxGponPPTPEthInfoAutoDetectCfg For 10/100 Base-T Ethernet interfaces, this attribute is used to set the configuration options:
Auto-sensing: 0x00; 10Base-T: 0x01; 100Base-T: 0x02: Gigabit Ethernet: 0x03. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.5 |
| zxGponPPTPEthInfoEthLoopback This attribute is used to set the Ethernet loopback configuration: No loopback
(value normal), Loop3 (value loop, Loopback of downstream traffic after PHY
transceiver). Loop 3 i… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.6 |
| zxGponPPTPEthInfoAdminState This attribute is used to activate (unlock: value enabled) and deactivate
(lock: value disabled) the functions performed by instances of this managed entity.
Selection of a defa… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.7 |
| zxGponPPTPEthInfoOperationalState This attribute indicates whether or not this managed entity is capable of performing
its task. The operational state reflects the perceived ability to receive or to
generate a v… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.8 |
| zxGponPPTPEthInfoDuplexSpeedInd For 10/100 Base-T Ethernet interfaces, it is used to set the configuration options:
Auto-sensing(incluing speed and duplex): 1; It comprises 'Auto detection configuration'
and 'Du… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponMgmtPonOltId OLT identifier, from 1 to N.
bit 31~28?atype(1)
bit 27~24?ashelf(0)
bit 23~16?aslotId
bit 16~8?aoltId
bit 7~0?areserved(0) | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.1.1.1.1 |
| zxGponMgmtPonOnuId an ONU in an OLT, from 1 to M. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.1.1.1.2 |
| zxGponMACBriPortCfgDataMeIdIdx This attribute provides a unique number for each instance of this managed entity. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.4.1.1 |
| zxGponMACBriPortAddrMacAddr This attribute lists destination MAC Addresses associated with the bridge port. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1012.3.23.8.7.1.1 |