ZXGPON-SERVICE-MIB Table View

OLT identifier, from 1 to N.
bit 31~28?atype(1)
bit 27~24?ashelf(0)
bit 23~16?aslotId
bit 16~8?aoltId
bit 7~0?areserved(0)

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.1.1.1.1

zxGponMgmtPonOnuId

an ONU in an OLT, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.1.1.1.2

zxGponMgmtPonEntryStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.3902.1012.3.1.1.1.3

zxGponOltDevInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.1 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltDevInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltDevInfoTable'

zxGponOltDevInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.1.1

It is entry in the zxGponOltDevInfoTable.

Indexes

No indexes recorded

Column Syntax OID

zxGponDbaEnable

Enable or disable DBA on this olt .

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.11.1.1.1

zxGponFECTable

table

.1.3.6.1.4.1.3902.1012.3.11.3 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponFECTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponFECTable'

zxGponFECEntry row .1.3.6.1.4.1.3902.1012.3.11.3.1

It is entry in the zxGponFECTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponFECMode Indicates the FEC mode on this olt .	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.11.3.1.1`

zxGponRTDTable

table

.1.3.6.1.4.1.3902.1012.3.11.4 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponRTDTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponRTDTable'

zxGponRTDEntry row .1.3.6.1.4.1.3902.1012.3.11.4.1

It is entry in the zxGponRTDTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponRTDEqd Equalized delay of onu.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.4.1.1`
zxGponRTDDistance Distance of onu.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.4.1.2`

zxGponRangeTable

table

.1.3.6.1.4.1.3902.1012.3.11.5 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponRangeTable'

zxGponRangeEntry row .1.3.6.1.4.1.3902.1012.3.11.5.1

It is entry in the zxGponRangeTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponRangeMode Indicates the range mode of this olt . mode0(1): 0 - 20 km mode1(2): 20 - 40 km mode2(3): 40 - 60 km	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.11.5.1.1`
zxGponRangeBase It indicates value of the base distance of the range. The distance of the range is [zxGponRangeBase,zxGponRangeBase + zxGponRangeDiff], The max distance of the range is 60km	100mInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.5.1.2`
zxGponRangeDiff It indicates the distance of the range coverage area.	100mInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.5.1.3`
zxGponRangeCapability Indicates the range capability. fixed(1): zxGponRangeMode working,only support 0-20,20-40,40-60 step(2): zxGponRangeBase and zxGponRangeDiff working	Enumeration	`.1.3.6.1.4.1.3902.1012.3.11.5.1.4`

zxGponPonFloodBandwidthInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.9 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonFloodBandwidthInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonFloodBandwidthInfoTable'

zxGponPonFloodBandwidthInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.9.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPonFloodBandwidth 64-2609192 kbps	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1012.3.11.9.1.1`

zxGponPonMCastBandwidthInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.10 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonMCastBandwidthInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonMCastBandwidthInfoTable'

zxGponPonMCastBandwidthInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.10.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPonMCastTotalBandwidth	SNMPv2-SMIUnsigned32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3902.1012.3.11.10.1.1`

zxGponSCBMCastGroupTable

table

.1.3.6.1.4.1.3902.1012.3.11.11 · 1 row entry · 7 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponSCBMCastGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponSCBMCastGroupTable'

This table represents SCB multicast configuration.

zxGponSCBMCastGroupEntry row .1.3.6.1.4.1.3902.1012.3.11.11.1

It provide a SCB multicast configuration entry.

Indexes

No indexes recorded

Column Syntax OID

zxGponSCBMCastGroupIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.11.1.1

zxGponSCBMCastGroupName

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.11.11.1.2

zxGponSCBMCastMgmtPortID

zxGponSCBMCastGroupDownBWPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.11.1.3

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.11.1.4

zxGponSCBMCastRealPortID

If 'zxGponSCBMCastMgmtPortID' is the real gpon portid, it is equal to the 'zxGponSCBMCastMgmtPortID'

zxGponSCBMCastEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.11.1.5

zxGponSCBMCastOntListIdx

OctetString

.1.3.6.1.4.1.3902.1012.3.11.11.1.6

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.11.11.1.7

zxGponSCBMCastOntTable

table

.1.3.6.1.4.1.3902.1012.3.11.12 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponSCBMCastOntTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponSCBMCastOntTable'

This table represents SCB multicast configuration in ONT.

zxGponSCBMCastOntEntry row .1.3.6.1.4.1.3902.1012.3.11.12.1

It provide a SCB multicast configuration entry.

Indexes

No indexes recorded

Column Syntax OID

zxGponSCBMCastOntSetIdx

zxGponSCBMCastOntSetGroupIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.12.1.1

It is equal to zxGponSCBMCastGroupIdx.

zxGponSCBMCastOntEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.12.1.2

zxGponSCBMCastOntList

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.11.12.1.3

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.11.12.1.4

zxGponPonBroadCastBandwidthInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.13 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonBroadCastBandwidthInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonBroadCastBandwidthInfoTable'

zxGponPonBroadCastBandwidthInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.13.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPonBroadCastBandwidth 64-2609192 kbps	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.13.1.1`

zxGponPonPeakBandwidthInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.14 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonPeakBandwidthInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonPeakBandwidthInfoTable'

zxGponPonPeakBandwidthInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.14.1

Indexes

No indexes recorded

Column Syntax OID

zxGponPonPeakBandwidth

64-2609192 kbps

Enumerated Values:

1	enable
2	disable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.11.14.1.1

zxGponGetValidIdxTable

table

.1.3.6.1.4.1.3902.1012.3.11.16 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGetValidIdxTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGetValidIdxTable'

This table represents current valid index table.

zxGponGetValidIdxEntry row .1.3.6.1.4.1.3902.1012.3.11.16.1

It provide a current valid index entry.

Indexes

Column	Syntax	OID
zxGponGetValidIdxTableNameIdx It is a table name ID, specifical number denotes one table. Only these tables are valid in which it is only one integer index. GPON_TBLID_BWPROFILE 1 GPON_TBLID_THRESPROFILE 2 GPON_TBLID_TRAFFICPROF…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.16.1.1`
zxGponGetValidIdxvalue It is a valid in the table.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.16.1.2`

zxGponSpiIfPmTable

table

.1.3.6.1.4.1.3902.1012.3.11.20 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponSpiIfPmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponSpiIfPmTable'

This table represents SPI PM table.

zxGponSpiIfPmEntry row .1.3.6.1.4.1.3902.1012.3.11.20.1

It provide a GE port SPI PM entry.

Indexes

Column Syntax OID

zxGponSpiIfRxFrm

Enumerated Values:

1	atm
2	gem
3	both

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.1

zxGponSpiIfRxByte

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.2

zxGponSpiIfRxDiscardFrm

Enumerated Values:

1	sr
2	nsr

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.3

zxGponSpiIfRxDiscardByte

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.4

zxGponSpiIfTxFrm

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.5

zxGponSpiIfTxByte

Enumerated Values:

1	notsend
2	mode0
3	mode1
4	mode2

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.6

zxGponSpiIfTxDiscardFrm

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.7

zxGponSpiIfTxDiscardByte

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.11.20.1.8

zxGponPonScheduleModeInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.21 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonScheduleModeInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonScheduleModeInfoTable'

zxGponPonScheduleModeInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.21.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponMgmtPonSlotId slot id(1-6,9-14)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.21.1.1`
zxGponPonScheduleMode 1:onuOrGemport 2:PON	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.21.1.2`

zxGponPon802Dot1pMapInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.22 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPon802Dot1pMapInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPon802Dot1pMapInfoTable'

zxGponPon802Dot1pMapInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.22.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPonDot1pMapQueue0 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.1`
zxGponPonDot1pMapQueue1 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.2`
zxGponPonDot1pMapQueue2 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.3`
zxGponPonDot1pMapQueue3 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.4`
zxGponPonDot1pMapQueue4 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.5`
zxGponPonDot1pMapQueue5 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.6`
zxGponPonDot1pMapQueue6 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.7`
zxGponPonDot1pMapQueue7 Cos Queue No Dot1p Map to,value range [0..7]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.22.1.8`

zxGponPonWeightMgmtInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.23 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPonWeightMgmtInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPonWeightMgmtInfoTable'

zxGponPonWeightMgmtInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.23.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPonWeightMgmtQueue0 queue0 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.1`
zxGponPonWeightMgmtQueue1 queue1 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.2`
zxGponPonWeightMgmtQueue2 queue2 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.3`
zxGponPonWeightMgmtQueue3 queue3 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.4`
zxGponPonWeightMgmtQueue4 queue4 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.5`
zxGponPonWeightMgmtQueue5 queue5 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.6`
zxGponPonWeightMgmtQueue6 queue6 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.7`
zxGponPonWeightMgmtQueue7 queue7 weight value[0..255]	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.23.1.8`

zxGponFloodBroadCastEnableInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.24 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponFloodBroadCastEnableInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponFloodBroadCastEnableInfoTable'

zxGponFloodBroadCastEnableInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.24.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponFloodEnable 1:enalbe 2:disable	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.24.1.1`
zxGponBroadcastEnable 1:enable 2:disable	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.11.24.1.2`

zxGponSlotOpticalDetectInfoTable

table

.1.3.6.1.4.1.3902.1012.3.11.25 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponSlotOpticalDetectInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponSlotOpticalDetectInfoTable'

zxGponSlotOpticalDetectInfoEntry row .1.3.6.1.4.1.3902.1012.3.11.25.1

Indexes

No indexes recorded

Column Syntax OID

zxGponSlotOpticalDetect

enable/disable pon Optical-Always-On detection.

zxGponDownFrameInfoServices

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.11.25.1.1

zxGponOltInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.1 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltInfoTable'

zxGponOltInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.1.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOltInfoPONTransRateType This attribute indicate not the actual bytes rate, but the base transfer type. the map of ratetype and actual bytes rate as blow: ratetype1(1)----------- Up 155M, Down 1.2G ratetype2(2)----------- Up 622M, Down 1…	Enumeration	`.1.3.6.1.4.1.3902.1012.3.12.1.1.1`
zxGponOltInfoOpticalTransceiverType	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.1.1.2`
zxGponOltInfoOntMgmtMode	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.1.1.3`
zxGponOltInfoCurrentStatus	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.1.1.4`
zxGponOltInfoFECEnable Support ability, FEC	Enumeration	`.1.3.6.1.4.1.3902.1012.3.12.1.1.5`
zxGponOltInfoDBAEnable Support ability, DBA	Enumeration	`.1.3.6.1.4.1.3902.1012.3.12.1.1.6`

zxGponOltStatisticInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.2 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltStatisticInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltStatisticInfoTable'

zxGponOltStatisticInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.2.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOltStatisticInfoSuperframeCounter To provide error tolerance, the OLT must implement a local superframe counter	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.3902.1012.3.12.2.1.1`
zxGponOltStatisticInfoBIPCounter The received BIP8 is compared with the calculated BIP8 on the received stream. In case of a difference ERR counter is incremented	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.3902.1012.3.12.2.1.2`

zxGponDownFrameInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.3 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponDownFrameInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponDownFrameInfoTable'

zxGponDownFrameInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.3.1

Indexes

No indexes recorded

Column Syntax OID

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.12.3.1.1

zxGponDownFrameInfoSIMinGranularity

The pointers are given in units of bytes, allowing the OLT to control the medium
at an effective static bandwidth granularity of 64 kbit/s.

zxGponDownFrameInfoDbaMethod

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.12.3.1.2

This attribute present the method of DBA(Dynamic Bandwidth Assignment), it value can be either
sr(Status Reporting) or nsr(Non Status Reporting)

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.12.3.1.3

zxGponDownFrameInfoScramblingEnable

This attribute is used to activate/deactivate the ATM cell scrambling function. This
attribute is only present for ATM interfaces where ATM cell scrambling may be controlled,
i.e. enabled(1) or disabled(2). Upon auton…

zxGponDownFrameInfoFECEnable

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.3.1.4

zxGponDownFrameInfoOnuSendDBRuMode

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.3.1.5

Depending on the contents of these value, the ONU will send the DBRu corresponding to the
allocation ID or not. The code points defined are:
1: Do not send DBRu at all.
2: Send t…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.12.3.1.6

zxGponOltPmStatisticInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.4 · 1 row entry · 16 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltPmStatisticInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltPmStatisticInfoTable'

zxGponOltPmStatisticInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.4.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOltPmStatisticInfoGemPacketTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.1`
zxGponOltPmStatisticInfoGemPacketRxCorIdle	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.2`
zxGponOltPmStatisticInfoGemPacketRxCorNoIdle	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.3`
zxGponOltPmStatisticInfoGemPacketRxErr	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.4`
zxGponOltPmStatisticInfoGemPayloadBytesRx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.5`
zxGponOltPmStatisticInfoEthPacketTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.6`
zxGponOltPmStatisticInfoEthPacketRxCor	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.7`
zxGponOltPmStatisticInfoEthPacketRxErr	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.8`
zxGponOltPmStatisticInfoOmciPacketTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.9`
zxGponOltPmStatisticInfoOmciPacketRxCor	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.10`
zxGponOltPmStatisticInfoOmciPacketRxErr	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.11`
zxGponOltPmStatisticInfoPloamTx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.12`
zxGponOltPmStatisticInfoPloamRxCor	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.13`
zxGponOltPmStatisticInfoPloamRxErr	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.14`
zxGponOltPmStatisticInfoERR	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.15`
zxGponOltPmStatisticInfoREI	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.4.1.16`

zxGponFindOnuTimerTable

table

.1.3.6.1.4.1.3902.1012.3.12.7 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponFindOnuTimerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponFindOnuTimerTable'

zxGponFindOnuTimerEntry row .1.3.6.1.4.1.3902.1012.3.12.7.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGPonFindOnuTimerNewOnt	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.7.1.1`
zxGponFindOnuTimerMissingOnt	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.7.1.2`
zxGPonFindOnuTimerOpenWindowFrame	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.7.1.3`

zxGponOltAlarmTable

table

.1.3.6.1.4.1.3902.1012.3.12.8 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltAlarmTable'

zxGponOltAlarmEntry row .1.3.6.1.4.1.3902.1012.3.12.8.1

Indexes

No indexes recorded

Column Syntax OID

zxGPonOltAlarmLos

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.8.1.1

zxGponOltAlarmLosMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.8.1.2

zxGponOltAlarmTF

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.8.1.3

zxGponOltAlarmTFMask

zxGponOntUpAlarmOltSideLOSui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.8.1.4

zxGponOntUpAlarmOltSideTable

table

.1.3.6.1.4.1.3902.1012.3.12.9 · 1 row entry · 32 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntUpAlarmOltSideTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntUpAlarmOltSideTable'

zxGponOntUpAlarmOltSideEntry row .1.3.6.1.4.1.3902.1012.3.12.9.1

Indexes

No indexes recorded

Column Syntax OID

Loss of signal for ONUi
Detection condition : No valid optical signal from ONU when it was expected during M
consecutive frames. (M is configurable. Recommended value is 4)
Action : G…

zxGponOntUpAlarmOltSideLOSuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.1

Loss of signal for ONUi mask

zxGponOntUpAlarmOltSideLOFui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.2

Loss of Frame of ONUi
Detection condition : When 4 consecutive invalid delimiters from ONUi are received.
Action : Send 3 times Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I
…

zxGponOntUpAlarmOltSideLOFuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.3

Loss of Frame of ONUi mask

zxGponOntUpAlarmOltSideDOWui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.4

Drift of Window of ONUi
Detection condition : An ONU transmission is received at an unexpected place within the U/S
virtual frame. DOWi means the phase has shifted but is correctable
…

zxGponOntUpAlarmOltSideDOWuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.5

Drift of Window of ONUi mask

zxGponOntUpAlarmOltSideSFui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.6

Signal Fail of ONUi
Detection condition : When the upstream BER of ONUi becomes ?10?y, this state is entered. Y
is configurable in the range of 3 to 8
Action : Send 3 times Deactivate…

zxGponOntUpAlarmOltSideSFuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.7

Signal Fail of ONUi mask

zxGponOntUpAlarmOltSideSDui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.8

Signal Degraded of ONUi
Detection condition : When the upstream BER of ONUi becomes ?10?x, this state is entered.
X is configurable in the range of 4 to 9. But must be higher than
…

zxGponOntUpAlarmOltSideSDuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.9

Signal Degraded of ONUi mask

zxGponOntUpAlarmOltSideLCDAui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.10

Loss of ATM channel delineation
Detection condition : When 8 consecutive invalid HECs from ONUi are received.
Action : Send 3 times Deactivate_ONU-ID messages, Generate Loss_of_phy_layer_I
…

zxGponOntUpAlarmOltSideLCDAuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.11

Loss of ATM channel delineation mask

zxGponOntUpAlarmOltSideLCDGui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.12

Loss of GEM channel delineation
Detection condition : GEM Channel could not be delineated during 3 consecutive frames.
Action : Send 3 times Deactivate_ONU-ID messages,Generate Loss_of_phy_layer_I
…

zxGponOntUpAlarmOltSideLCDGuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.13

Loss of GEM channel delineation mask

zxGponOntUpAlarmOltSideRDIui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.14

Remote Defect Indication of ONUi
Detection condition : When the RDI field of ONUi is asserted. The OLT transmission is
received with defects at the ONUi
Action :
Cancel condition …

zxGponOntUpAlarmOltSideRDIuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.15

Remote Defect Indication of ONUi mask

zxGponOntUpAlarmOltSideSUFui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.16

Start-up Failure of ONUi
Detection condition : The ranging of ONUi has failed n times (n = 2) while the OLT has
received optical bursts from this ONU
Action : Send 3 times Deactivate_…

zxGponOntUpAlarmOltSideSUFuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.17

Start-up Failure of ONUi mask

zxGponOntUpAlarmOltSideDFui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.18

Deactivate Failure of ONUi
Detection condition : The ONU does not react correctly after three Deactivate_ONU-ID messages.
Action :
Cancel condition : Cancelled by the operator.

zxGponOntUpAlarmOltSideDFuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.19

Deactivate Failure of ONUi mask

zxGponOntUpAlarmOltSideLOAui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.20

Loss of Acknowledge with ONUi
Detection condition : The OLT does not receive an acknowledgement from ONUi after a set
of downstream messages that imply an upstream acknowledge.
Action …

zxGponOntUpAlarmOltSideLOAuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.21

Loss of Acknowledge with ONUi mask

zxGponOntUpAlarmOltSideDGui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.22

Receive Dying-Gasp of ONUi
Detection condition : When the OLT receives DG message from ONUi, DGi is asserted.
Action : Ignore received alarms from this ONU. Generate Loss_of_phy_layer_I
…

zxGponOntUpAlarmOltSideDGuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.23

Receive Dying-Gasp of ONUi mask

zxGponOntUpAlarmOltSideLOAMui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.24

Loss of PLOAM for ONUi
Detection condition : When 3 consecutive PLOAM messages of ONUi are missing after the
OLT issues SendPLOAMU request for that ONU
Action : Send 3 times Deactivat…

zxGponOntUpAlarmOltSideLOAMuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.25

Loss of PLOAM for ONUi mask

zxGponOntUpAlarmOltSideMEMui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.26

Message_Error Message from ONUi
Detection condition : When the OLT receives an unknown message from ONUi
Action :
Cancel condition : When the operator is informed.

zxGponOntUpAlarmOltSideMEMuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.27

Message_Error Message from ONUi mask

zxGponOntUpAlarmOltSideMISui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.28

Link Mismatch of ONUi
Detection condition : The OLT detects that the received PSTi and the transmitted
PST are different.
Action :
Cancel condition : The OLT detects that received…

zxGponOntUpAlarmOltSideMISuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.29

Link Mismatch of ONUi mask

zxGponOntUpAlarmOltSidePEEui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.30

Physical Equipment Error of ONUi
Detection condition : When the OLT receives a PEE Message from the ONU
Action : Generate Loss_of_physical_layer_I notification
Cancel condition : When the OLT doesn't rec…

zxGponOntUpAlarmOltSidePEEuiMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.31

Physical Equipment Error of ONUi mask

zxGponOntUpPmOltSideERRui

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.12.9.1.32

zxGponBerDowThresholdTable

table

.1.3.6.1.4.1.3902.1012.3.12.10 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponBerDowThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponBerDowThresholdTable'

zxGponBerDowThresholdEntry row .1.3.6.1.4.1.3902.1012.3.12.10.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponBerDowThresholdSDui	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.10.1.1`
zxGponBerDowThresholdSFui	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.10.1.2`
zxGponBerDowThresholdDOWi	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.12.10.1.3`

zxGponOntUpPmOltSideTable

table

.1.3.6.1.4.1.3902.1012.3.12.11 · 1 row entry · 9 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntUpPmOltSideTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntUpPmOltSideTable'

zxGponOntUpPmOltSideEntry row .1.3.6.1.4.1.3902.1012.3.12.11.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOntUpPmOltSideREIui

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.11.1.1

zxGponOntUpPmOltSideCorrNIdleGemFramesui

Constraints:
range: 128-128

.1.3.6.1.4.1.3902.1012.3.12.11.1.2

zxGponOntUpPmOltSideCorrIdleGemFramesui

Constraints:
range: 127-127

.1.3.6.1.4.1.3902.1012.3.12.11.1.3

zxGponOntUpPmOltSideErroredGemFramesui

Enumerated Values:

1	deactive
2	omciready

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.11.1.4

zxGponOntUpPmOltSideGemPayloadBytesui

Enumerated Values:

1	nonePw
2	force

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.11.1.5

zxGponOntUpPmOltSideCorrectEthFramesui

Constraints:
range: 10-10

.1.3.6.1.4.1.3902.1012.3.12.11.1.6

zxGponOntUpPmOltSideErroredEthFramesui

Enumerated Values:

1	sn
2	regid

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.11.1.7

zxGponOntUpPmOltSideTotalOmciFramesui

Enumerated Values:

1	learn
2	provision

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.11.1.8

Constraints:
range: 8-8

.1.3.6.1.4.1.3902.1012.3.12.11.1.9

zxGponOltUpPmTable

table

.1.3.6.1.4.1.3902.1012.3.12.12 · 1 row entry · 9 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltUpPmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltUpPmTable'

zxGponOltUpPmEntry row .1.3.6.1.4.1.3902.1012.3.12.12.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOltUpPmERRu

Enumerated Values:

1	enable
2	disable

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.1

zxGponOltUpPmREIu

zxGponOltUpPmCorrNIdleGemFramesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.2

zxGponOltUpPmCorrIdleGemFramesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.3

zxGponOltUpPmErroredGemFramesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.4

zxGponOltUpPmGemPayloadBytesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.5

zxGponOltUpPmCorrectEthFramesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.6

zxGponOltUpPmErroredEthFramesu

Enumerated Values:

1	configured
2	noconfigured

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.7

zxGponOltUpPmTotalOmciFramesu

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.8

zxGponOltPmStatisInfoCorrectNonIdleGemFramesUpstream

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.3902.1012.3.12.12.1.9

zxGponOltPmStatisRealtimeInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.13 · 1 row entry · 14 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltPmStatisRealtimeInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltPmStatisRealtimeInfoTable'

zxGponOltPmStatisRealtimeInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.13.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOltPmStatisInfoCorrectIdleGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.1

zxGponOltPmStatisInfoErroredGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.2

zxGponOltPmStatisInfoGemPayloadBytesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.3

zxGponOltPmStatisInfoCorrectEthernetFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.4

zxGponOltPmStatisInfoErroredEthernetFramesUpstream

Constraints:
range: 8-8

.1.3.6.1.4.1.3902.1012.3.12.13.1.5

zxGponOltPmStatisInfoTotalOmciFramesUpstream

Constraints:
range: 4-4

.1.3.6.1.4.1.3902.1012.3.12.13.1.6

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.7

zxGponOltPmStatisInfoERR

Constraints:
range: 10-10

.1.3.6.1.4.1.3902.1012.3.12.13.1.8

zxGponOltPmStatisInfoREI

zxGponOltPmStatisInfoValidEthernetPacketDownstream

Enumerated Values:

1	o1-initial
2	o2-standby
3	o3-powersetup
4	o4-serialnumber
5	o5-ranging
6	o6-operation
7	o7-popup

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.9

zxGponOltPmStatisInfoCpuPacketDownstream

Constraints:
range: 8-8

.1.3.6.1.4.1.3902.1012.3.12.13.1.10

zxGponOltPmStatisInfoPloamDownstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.11

zxGponOltPmStatisInfoPloamUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.12

zxGponOltPmStatisInfoInvalidPacketUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.13

zxGponOltPmStatisHistoryInfoCorrectNonIdleGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.13.1.14

zxGponOltPmStatisHistoryInfoTable

table

.1.3.6.1.4.1.3902.1012.3.12.14 · 1 row entry · 14 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltPmStatisHistoryInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltPmStatisHistoryInfoTable'

zxGponOltPmStatisHistoryInfoEntry row .1.3.6.1.4.1.3902.1012.3.12.14.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOltPmStatisHistoryInfoCorrectIdleGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.1

zxGponOltPmStatisHistoryInfoErroredGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.2

zxGponOltPmStatisHistoryInfoGemPayloadBytesUpstream

Enumerated Values:

1	enable
2	disable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.3

zxGponOltPmStatisHistoryInfoCorrectEthernetFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.4

zxGponOltPmStatisHistoryInfoErroredEthernetFramesUpstream

Enumerated Values:

1	enable
2	disable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.5

zxGponOltPmStatisHistoryInfoTotalOmciFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.6

zxGponOltPmStatisHistoryInfoERR

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.7

zxGponOltPmStatisHistoryInfoREI

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.8

zxGponOltPmStatisHistoryInfoValidEthernetPacketDownstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.9

zxGponOltPmStatisHistoryInfoCpuPacketDownstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.10

zxGponOltPmStatisHistoryInfoPloamDownstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.11

zxGponOltPmStatisHistoryInfoPloamUpstream

Constraints:
range: 0-256

.1.3.6.1.4.1.3902.1012.3.12.14.1.12

zxGponOltPmStatisHistoryInfoInvalidPacketUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.13

zxGPonOltPonOntDefaultState

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.12.14.1.14

zxGponOltPonInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.1 · 1 row entry · 17 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltPonInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltPonInfoTable'

zxGponOltPonInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.1.1

Indexes

zxGponStaticMulticastIdx

Column Syntax OID

zxGponOltPonName

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.1

zxGponOltPonDescription

The definition size of description does not include the termination.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.2

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.3

zxGPonOltPonOntDefaultPwMode

Enumerationr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.3902.1012.3.13.1.1.4

zxGPonOltPonOntDefaultPw

OctetStringr/w

Enumerated Values:

1	other
2	invalid
3	permanent
4	deleteOnReset
5	deleteOnTimeout

.1.3.6.1.4.1.3902.1012.3.13.1.1.5

zxGPonOltPonOntAuthMode

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.6

zxGPonOltPonOntSnAuthMode

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.7

zxGPonOltPonOntSnMask

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.8

zxGponOltPonOmccPortBase

zxGponOltPonSupportMaxOnts

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.1.1.9

zxGPonOltPonAdminState

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.13.1.1.10

zxGPonOltPonOperState

Enumeration

Constraints:
range: 0-256

.1.3.6.1.4.1.3902.1012.3.13.1.1.11

zxGponOltPonRealLegalOnts

Enumerated Values:

1	other
2	invalid
3	learned
4	self
5	mgmt
6	learnedAndMgmt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.1.1.12

zxGponOltPonRealIllegalOnts

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.1.1.13

zxGponOltPonSupportMaxTConts

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.1.1.14

zxGponOltPonRealUsedTConts

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.1.1.15

zxGponOltPonOntConfigureStatus

Constraints:
range: 0-256

.1.3.6.1.4.1.3902.1012.3.13.1.1.16

Enumeration

.1.3.6.1.4.1.3902.1012.3.13.1.1.17

zxGponOltMgmtOperTable

table

.1.3.6.1.4.1.3902.1012.3.13.2 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltMgmtOperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltMgmtOperTable'

zxGponOltMgmtOperEntry row .1.3.6.1.4.1.3902.1012.3.13.2.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOltReset

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.13.2.1.1

zxGponOltOff

zxGponOltOpticalDetectOnce

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.13.2.1.2

excute olt Optical-Always-ON detect once.

Constraints:
range: 0-256

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.13.2.1.3

zxGponUnCfgSnOntInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.3 · 1 row entry · 7 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponUnCfgSnOntInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponUnCfgSnOntInfoTable'

zxGponUnCfgSnOntInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.3.1

Indexes

No indexes recorded

Column Syntax OID

zxGponUnCfgSnIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.3.1.1

zxGponUnCfgSnOntSN

OctetString

.1.3.6.1.4.1.3902.1012.3.13.3.1.2

zxGponUnCfgSnOntRID

The register ID of the unconfigured ONT.

OctetString

Constraints:
range: 0-256

.1.3.6.1.4.1.3902.1012.3.13.3.1.3

zxGponUnCfgSnOntRtd

The RTD after ranging.

Enumerated Values:

1	enabled
2	disabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.3.1.4

zxGponUnCfgSnOntPsw

The password reported by the ONT.

OctetString

.1.3.6.1.4.1.3902.1012.3.13.3.1.5

zxGponUnCfgSnOntState

Enumeration

.1.3.6.1.4.1.3902.1012.3.13.3.1.6

zxGponUnCfgSnOntTime

OctetString

.1.3.6.1.4.1.3902.1012.3.13.3.1.7

zxGponOmccInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.4 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOmccInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOmccInfoTable'

zxGponOmccInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.4.1

Indexes

zxGponMgmtPonOltId zxGponEthTypeVlanMapEthType

Column	Syntax	OID
zxGponOmccChannelNum	Integer32 Constraints: `range: 0-1`	`.1.3.6.1.4.1.3902.1012.3.13.4.1.1`
zxGponOmccChannelBandwidth	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.4.1.2`
zxGponOmccChannelAdminState	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.13.4.1.3`
zxGponOmccChannelOpState	Enumeration Constraints: `range: 65-4095`	`.1.3.6.1.4.1.3902.1012.3.13.4.1.4`

zxGponOltBitErrTable

table

.1.3.6.1.4.1.3902.1012.3.13.5 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltBitErrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltBitErrTable'

zxGponOltBitErrEntry row .1.3.6.1.4.1.3902.1012.3.13.5.1

Indexes

Column	Syntax	OID
zxGponOltUpBerEnable	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.13.5.1.1`
zxGponOltUpBerCalcInterval	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.5.1.2`
zxGponOltDownBerEnable	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.13.5.1.3`
zxGponOltDownBerCalcInterval	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.5.1.4`
zxGponOltUpSfThreshold	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.5.1.5`
zxGponOltUpSdThreshold	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.5.1.6`

zxGponStaticMultiPortIdInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.10 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponStaticMultiPortIdInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponStaticMultiPortIdInfoTable'

The multicast address table, about the portid information.

zxGponStaticMultiPortIdInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.10.1

Indexes

No indexes recorded

Column Syntax OID

zxGponStaticMultiPortIdInfoIdx

zxGponStaticMultiPortIdList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.10.1.1

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.13.10.1.2

zxGponStaticMultiAddrIdx

It is some 'zxGponStaticMulticastIdx'

zxGponStaticMultiPortIdStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.10.1.3

Constraints:
range: 4-4

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.13.10.1.4

zxGponStaticMulticastAddressTable

table

.1.3.6.1.4.1.3902.1012.3.13.11 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponStaticMulticastAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponStaticMulticastAddressTable'

The multicast address table.

zxGponStaticMulticastAddressEntry row .1.3.6.1.4.1.3902.1012.3.13.11.1

Indexes

No indexes recorded

Column Syntax OID

zxGponStaticMulticastIdx

zxGponStaticMulticastAddress

Enumerated Values:

1	usSchedulerPriMech
2	usMaxTraffic

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.11.1.1

SNMPv2-TCMacAddressr/w

Enumerated Values:

1	none
2	vp
3	vpvc

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.3902.1012.3.13.11.1.2

zxGponStaticMulticastVlanId

VlanIdr/w

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.3902.1012.3.13.11.1.3

zxGponStaticMulticastPortIdIdx

OctetString

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1012.3.13.11.1.4

zxGponStaticMulticastStatus

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.3902.1012.3.13.11.1.5

zxGponMulticastAddressTable

table

.1.3.6.1.4.1.3902.1012.3.13.12 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMulticastAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMulticastAddressTable'

The multicast address table.

zxGponMulticastAddressEntry row .1.3.6.1.4.1.3902.1012.3.13.12.1

Indexes

zxGponMgmtPonOltId zxGponMgmtPonOnuId

Column	Syntax	OID
zxGponMulticastAddress	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.3902.1012.3.13.12.1.1`
zxGponMulticastVlanId	VlanId Type Constraints: `range: 1..4094`	`.1.3.6.1.4.1.3902.1012.3.13.12.1.2`
zxGponMulticastIdx	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.12.1.3`
zxGponMulticastPortIdIdx	OctetString	`.1.3.6.1.4.1.3902.1012.3.13.12.1.4`
zxGponMulticastStatus	Enumeration	`.1.3.6.1.4.1.3902.1012.3.13.12.1.5`

zxGponDsBFPortIdInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.13 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponDsBFPortIdInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponDsBFPortIdInfoTable'

The down broadcast flood control table ,about these portID.

zxGponDsBFPortIdInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.13.1

Indexes

No indexes recorded

Column Syntax OID

zxGponDsBFPortIdInfoIdx

zxGponDsBFPortIdInfoVlanIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.13.1.1

zxGponDsBFPortIdInfoList

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.13.13.1.2

It is some 'zxGponDownBroadcastFloodVlanId'

zxGponDsBFPortIdInfoStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.13.1.3

zxGponDownBroadcastFloodVlanId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.13.13.1.4

zxGponDownBroadcastFloodTable

table

.1.3.6.1.4.1.3902.1012.3.13.14 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponDownBroadcastFloodTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponDownBroadcastFloodTable'

The down broadcast flood control table.

zxGponDownBroadcastFloodEntry row .1.3.6.1.4.1.3902.1012.3.13.14.1

Indexes

No indexes recorded

Column Syntax OID

VlanId

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.3902.1012.3.13.14.1.1

zxGponDownBroadcastFloodPortList

OctetString

.1.3.6.1.4.1.3902.1012.3.13.14.1.2

zxGponDownBroadcastFloodEntryStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.13.14.1.3

zxGpon8021xOnOffTable

table

.1.3.6.1.4.1.3902.1012.3.13.15 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGpon8021xOnOffTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGpon8021xOnOffTable'

The portId 802.1x on-off table.

zxGpon8021xOnOffEntry row .1.3.6.1.4.1.3902.1012.3.13.15.1

Indexes

No indexes recorded

Column Syntax OID

zxGpon8021xOnOffIdx

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxGponOnt2Index

Enumerated Values:

synctime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.15.1.1

zxGpon8021xOnOffPortId

OctetStringr/w

Enumerated Values:

mibRest

.1.3.6.1.4.1.3902.1012.3.13.15.1.2

zxGpon8021xOnOffEnable

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.13.15.1.3

zxGponOltLoopbackTestInfoTable

table

.1.3.6.1.4.1.3902.1012.3.13.16 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltLoopbackTestInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltLoopbackTestInfoTable'

zxGponOltLoopbackTestInfoEntry row .1.3.6.1.4.1.3902.1012.3.13.16.1

Indexes

Column	Syntax	OID
zxGponOltLoopbackTestStart 1:start loopback test 2:stop loopback test	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.13.16.1.1`

zxGponOltEthSwitchTable

table

.1.3.6.1.4.1.3902.1012.3.13.17 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltEthSwitchTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltEthSwitchTable'

ETH SWITCH PROTECT STATE table.

zxGponOltEthSwitchEntry row .1.3.6.1.4.1.3902.1012.3.13.17.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponEthSwitchProtectState 0:DISABLE 1:ENABLE	Integer32r/w	`.1.3.6.1.4.1.3902.1012.3.13.17.1.1`

zxGponOltScbPortTable

table

.1.3.6.1.4.1.3902.1012.3.13.18 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltScbPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltScbPortTable'

Configure SCB PORTID table.

zxGponOltScbPortEntry row .1.3.6.1.4.1.3902.1012.3.13.18.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOltScbPort	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.3902.1012.3.13.18.1.1`

zxGponEthTypeVlanMapTable

table

.1.3.6.1.4.1.3902.1012.3.13.19 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponEthTypeVlanMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponEthTypeVlanMapTable'

Ethernet Type Map to Vlan.

zxGponEthTypeVlanMapEntry row .1.3.6.1.4.1.3902.1012.3.13.19.1

Indexes

No indexes recorded

Column Syntax OID

zxGponEthTypeVlanMapEthType

Ethernet protocol type

zxGponEthTypeVlanMapVlanId

Enumerated Values:

1	atm
2	gem
3	dual

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.13.19.1.1

The VLAN, which ethernet type map to.

VlanIdr/w

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.3902.1012.3.13.19.1.2

zxGponEthTypeVlanMapEntryStatus

RowStatus

zxGponEthVlanSwitchRowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.13.19.1.50

zxGponOltEthVlanSwitchTable

table

.1.3.6.1.4.1.3902.1012.3.13.20 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOltEthVlanSwitchTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOltEthVlanSwitchTable'

ETH VLAN SWITCH PROTECT STATE table.

zxGponOltEthVlanSwitchEntry row .1.3.6.1.4.1.3902.1012.3.13.20.1

Indexes

No indexes recorded

Column Syntax OID

zxGponEthSwitchVlanId

The VLAN, which port attached to bridge.

VlanId

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.3902.1012.3.13.20.1.1

RowStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.13.20.1.2

zxGponOntStatusInfoTable

table

.1.3.6.1.4.1.3902.1012.3.21.1 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntStatusInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntStatusInfoTable'

An instance of this managed entity is automatically created by 
the ONT after initialization. After the creation of this managed 
entity, the associated attributes are updated according to the 
data within the ONT itself.

zxGponOntStatusInfoEntry row .1.3.6.1.4.1.3902.1012.3.21.1.1

An entry in the ONT equipment status information table,
This managed entity represents the ONT as equipment.

Indexes

No indexes recorded

Column Syntax OID

zxGponOntIndex

An arbitrary(unique) integer for identifiying an entry
in the ONT equipment, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.1.1.1

zxGponOntMeId

A unique number for each instance of this managed entity.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.1.1.2

zxGponOntVendorId

It identifies the vendor of the ONT.

OctetString

.1.3.6.1.4.1.3902.1012.3.21.1.1.3

zxGponOntVersionId

It identifies the version of the ONT as defined by the vendor.
The printable value of '0' is used when version information is
not available or applicable to the ONT being represented.

OctetString

.1.3.6.1.4.1.3902.1012.3.21.1.1.4

zxGponOntSnId

The serial number is unique for each ONT. Note that the serial
number of the ONT contains the vendor id and/or the version number.

OctetString

.1.3.6.1.4.1.3902.1012.3.21.1.1.5

zxGponOntTrafficMgmtOpt

It identifies the upstream traffic management function implemented
in the ONT. 1 means the traffic scheduler and priority queue mechanism
are used for the upstream traffic. 2 means the maximum upstream traffic
of each…

Enumeration

.1.3.6.1.4.1.3902.1012.3.21.1.1.6

zxGponOntVpVcConnFunOpt

It identifies the support of ATM VP or VC cross-connection management
functions for the interworking connections to non ATM UNIs.
0 means no cross-connection management functions are modelled.
1 means ATM VP cross-con…

Enumeration

.1.3.6.1.4.1.3902.1012.3.21.1.1.7

zxGponOntBatteryBackup

It provides a Boolean indication of whether or not the ONT/NT supports
battery backup. False(2) will indicate that no battery is provisioned;
true(1) indicates that a battery is provisioned.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.1.1.8

zxGponOntAdminStatus

It is used to activate (true 1) and deactivate (false 2) the functions performed
by instances of this managed entity.It is read from ONT.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.21.1.1.9

zxGponOntOperStatus

It indicates whether or not a managed entity is capable of performing its task.
Valid values are true(1,enabled) and false(2,disabled).

Enumeration

.1.3.6.1.4.1.3902.1012.3.21.1.1.10

zxGponOntAlarmTable

table

.1.3.6.1.4.1.3902.1012.3.21.2 · 1 row entry · 14 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntAlarmTable'

This alarm is used to notify the managed system when a
failure has been detected or cleared.

zxGponOntAlarmEntry row .1.3.6.1.4.1.3902.1012.3.21.2.1

An entry in the ONT equipment alarm information table.

Indexes

No indexes recorded

Column Syntax OID

zxGponOntEquipmentAlarm

It is used to Indicate a functional failure on an internal interface.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntEquipmentAlarmMask

Enumerated Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.1

Indicates whether the occurence of zxGponOntEquipmentAlarm alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.2

zxGponOntPoweringAlarm

It is used to Indicate Loss of external power.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntPoweringAlarmMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.3

Indicates whether the occurence of zxGponOntPoweringAlarm alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.4

zxGponOntBatteryMissing

It is used to Indicate Battery is provisioned but missing.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntBatteryMissingMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.5

Indicates whether the occurence of zxGponOntBatteryMissing alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.6

zxGponOntBatteryFailure

It is used to Indicate Battery is provisioned and present but cannot recharge.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntBatteryFailureMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.7

Indicates whether the occurence of zxGponOntBatteryFailure alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.8

zxGponOntBatteryLow

It is used to Indicate battery is provisioned and present but its voltage is too low.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

Enumerated Values:

1	oneplusone
2	oneratioone1
3	oneratioone2

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.9

zxGponOntBatteryLowMask

Indicates whether the occurence of zxGponOntBatteryLow alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

zxGponOntPhysicalIntrusionAlarm

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.10

It is used to Indicate Applies if the ONT is supported with detection such as door or box open.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntPhysicalIntrusionAlarmMask

Constraints:
range: 0-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.11

Indicates whether the occurence of zxGponOntPhysicalIntrusionAlarm alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

zxGponOntONTSelfTestFailure

Constraints:
range: 0-65535

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.12

It is used to Indicate ONT has failed autonomous self test.
When this is true(1) the failure exists; When false(2), the failure is
not exist.

zxGponOntONTSelfTestFailureMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.13

Indicates whether the occurence of zxGponOntONTSelfTestFailure alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.2.1.14

zxGponOntActionsTable

table

.1.3.6.1.4.1.3902.1012.3.21.3 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntActionsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntActionsTable'

Acts the ONT table.

zxGponOntActionsEntry row .1.3.6.1.4.1.3902.1012.3.21.3.1

An entry in the ONT equipment Actions table.

Indexes

No indexes recorded

Column Syntax OID

zxGponOntReboot

It is used to Reboot the ONT.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.21.3.1.1

zxGponOntTest

It is used to initiate an ONT self test. Test outcome is 'Pass' or 'Fail'.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.21.3.1.2

zxGponOntSyncTime

It is used to synchronize the start time of all Monitoring managed entities
of the ONT with the reference time of the OLT and to reset the registers of
the Monitoring managed entities. The effect of this action is that…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.21.3.1.3

zxGponOntMibReset

Reset the MIB data sync attributes to 0x00 and reset the MIB of the ONT to its default
state. This default MIB consists of one instance of the ONT(ONTB)-PON managed entity, one
instance of the ONT Data managed entity, …

Enumerationr/w

Enumerated Values:

1	mode0Only
2	mode01
3	mode02
4	mode012
5	modeNotSupport

.1.3.6.1.4.1.3902.1012.3.21.3.1.4

zxGponOntTestResult

Test outcome is 'Pass' or 'Fail'.

Enumerated Values:

1	wholeDbaReportNotSupport
2	wholeDbaReportSupport

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.3.1.5

zxGponOnt2StatusInfoTable

table

.1.3.6.1.4.1.3902.1012.3.21.4 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOnt2StatusInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOnt2StatusInfoTable'

An instance of this managed entity is automatically created by the ONT after
initialization. After the creation of this managed entity, the associated
attributes are updated according to the data within the ONT itself;It
provides additional attributes that are associated with the G-PON ONT.

zxGponOnt2StatusInfoEntry row .1.3.6.1.4.1.3902.1012.3.21.4.1

An entry in the ONT2 equipment config information table,
This managed entity represents the ONT additional attributes.

Indexes

No indexes recorded

Column Syntax OID

zxGponOnt2Index

An arbitrary(unique) integer for identifiying an entry
in the ONT equipment, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.4.1.1

zxGponOnt2MeId

It provides a unique number for each instance of this managed entity.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.4.1.2

zxGponOnt2EquipmentId

It may be used to identify the specific type of ONT.

OctetString

.1.3.6.1.4.1.3902.1012.3.21.4.1.3

zxGponOnt2OMCCVersion

It is used to identify the specific version of the OMCC protocol
being used by the ONT. This is used to allow the OLT to manage a
network with ONTs that support different OMCC versions. The only
valid value at this ti…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.4.1.4

zxGponOnt2VendorProdCode

It is used to provide a vendor-specific product code for the ONT.

zxGponOnt2TotalTrafSchedNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.4.1.5

zxGponOnt2SecurityCapab

It is used to advertise the advanced security modes of the ONT.
The following codepoints are defined:
0: Reserved for future use;
1: AES encryption of the downstream payload is supported;
2..255: Reserved for future …

Integer32

Enumerated Values:

1	modeAtm
2	modeGem

.1.3.6.1.4.1.3902.1012.3.21.4.1.6

zxGponOnt2SecurityMode

It is used to select the advanced security mode for the ONT.
The following codepoints are defined:
0: Reserved for future use;
1: AES algorithm for unicast traffic will be used;
2..255: Reserved for future use.

Integer32r/w

Enumerated Values:

1	hol
2	wrr
3	null

.1.3.6.1.4.1.3902.1012.3.21.4.1.7

zxGponOnt2TotalPriQueNum

It provides a total number of priority queues which are not
associated with the PON IF line card.

Integer32

.1.3.6.1.4.1.3902.1012.3.21.4.1.8

It provides a total number of Traffic Schedulers which are
not associated with the PON IF line card. The ONT supports
NULL function, HOL scheduling and WRR from the priority control
and guarantee of minimum rate cont…

Integer32

.1.3.6.1.4.1.3902.1012.3.21.4.1.9

zxGponOnt2Mode

It identifies whether the ONT can operate in ATM-only mode (1),
GEM-only mode (2), or dual (both ATM and GEM) mode (3).

Enumeration

.1.3.6.1.4.1.3902.1012.3.21.4.1.10

zxGponThresholdDataTable

table

.1.3.6.1.4.1.3902.1012.3.21.11 · 1 row entry · 20 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponThresholdDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponThresholdDataTable'

Contains threshold values for the performance monitoring parameters
maintained in one or more instances of other managed entities.

zxGponThresholdDataEntry row .1.3.6.1.4.1.3902.1012.3.21.11.1

An entry in the Threshold Data 1 table.

Indexes

No indexes recorded

Column Syntax OID

zxGponThresholdDataIndex

An arbitrary(unique) integer for identifiying an entry
in the table, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.11.1.1

zxGponThresholdDataMeId

A unique number for each instance of this managed entity.

zxGponThresholdDataValue1

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.11.1.2

It provides the associated threshold value for the 1st thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.3

It provides the associated threshold value for the 2nd thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue3

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.4

It provides the associated threshold value for the 3rd/9th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT …

zxGponThresholdDataValue4

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.5

It provides the associated threshold value for the 4th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue5

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.6

It provides the associated threshold value for the 5th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue6

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.7

It provides the associated threshold value for the 6th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue7

Enumerated Values:

1	dscpTo8021p
2	tagFrmToVal

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.8

It provides the associated threshold value for the 7st thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue8

Constraints:
range: 8-8

.1.3.6.1.4.1.3902.1012.3.21.11.1.9

It provides the associated threshold value for the 8th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue9

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.10

It provides the associated threshold value for the 9th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataValue10

Enumerated Values:

1	nmsCreate
2	neCreate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.11

It provides the associated threshold value for the 10th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be …

zxGponThresholdDataValue11

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.12

It provides the associated threshold value for the 11th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be …

zxGponThresholdDataValue12

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.13

It provides the associated threshold value for the 12th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be …

zxGponThresholdDataValue13

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.14

It provides the associated threshold value for the 13th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be …

zxGponThresholdDataValue14

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.15

It provides the associated threshold value for the 14th thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be …

zxGponThresholdDataCreateUsedIdx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.21.11.1.16

This attribute represents the template index which created by zxGponE2eServicePathTable. If this
object is not created by zxGponE2eServicePathTable, this attribute is set to 0.

zxGponThresholdDataModifyMatchIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.11.1.17

This attribute represents the template index of a matching template when this table is modified
directly. If there is no mactching template after modified, this attribute is set to 0.

zxGponThresholdDataModifyFlag

Enumerated Values:

1	enabled
2	disabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.11.1.18

If this object is created by zxGponE2eServicePathTable, this attribute represents the modifing
flag of template used by this object, it is set to true(1) if the template was modified,
otherwise, it is set to false(2).

Enumeration

.1.3.6.1.4.1.3902.1012.3.21.11.1.19

zxGponThresholdDataEntryStatus

The control that allows creation and deletion of entries.

zxGponProtectionDataIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.21.11.1.20

zxGponProtectionDataTable

table

.1.3.6.1.4.1.3902.1012.3.21.13 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponProtectionDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponProtectionDataTable'

It is used for the ONT that supports the PON protection function.
It represents the capability and parameters for protection function.

zxGponProtectionDataEntry row .1.3.6.1.4.1.3902.1012.3.21.13.1

An entry in the Protection Data table.

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry
in the ONT equipment, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.13.1.1

zxGponProtectionDataMeId

A unique number for each instance of this managed entity.

zxGponProtectionDataWorkingAni

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.13.1.2

It indicates the index of the ANI-G managed table that represents a
working side of PON protection. I.e. it is the table XXXXX index.

zxGponProtectionDataProtectionAni

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.13.1.3

It indicates the index of the ANI-G managed table that represents a
protection side of PON protection. I.e. it is the table XXXXX index.

zxGponProtectionDataProtectionType

Enumerated Values:

1	normal
2	loop

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.21.13.1.4

It provides the behaviour of PON protection. The valid values are as follows:
1: 1+1 Protection,
2: 1:1 Protection without Extra traffic,
3: 1:1 Protection with capability to support Extra traffic.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.3902.1012.3.21.13.1.5

zxGponProtectionDataRevertive

It indicates whether the protection scheme uses revertive mode (true, value 1)
or non-revertive mode (false, value 2).

Enumerated Values:

1	enabled
2	disabled

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.21.13.1.6

zxGponProtectionDataWTT

It specifies the amount of time, in units of seconds, to wait during the time from
a fault clear to switching over the trail/connection/line to the working side.

Integer32r/w

Enumerated Values:

1	autonegotiate
2	half-10
3	full-10
4	half-100
5	full-100
6	full-1000

.1.3.6.1.4.1.3902.1012.3.21.13.1.7

zxGponProtectionDataSGT

It specifies the amount of time, in units of milliseconds, to wait during the interval
from the detection of a fault to the time when a protection trail/connection/line can
be used to transport the normal traffic signa…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.21.13.1.8

zxGponAniInfoTable

table

.1.3.6.1.4.1.3902.1012.3.22.1 · 1 row entry · 9 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponAniInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponAniInfoTable'

An instance of this managed entity is automatically created by 
the ONT after initialization.

zxGponAniInfoEntry row .1.3.6.1.4.1.3902.1012.3.22.1.1

An entry in the ANI status information table, This managed entity
is used to organize data associated with the Access Network
Interface supported by the ONT.

Indexes

No indexes recorded

Column Syntax OID

zxGponAniInfoIndex

An arbitrary(unique) integer for identifiying an entry
in the Ani manangement, from 1 to M.

Enumerated Values:

1	bridged
2	iprouter
3	auto

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.1

zxGponAniInfoMeId

A unique number for each instance of this managed entity.

zxGponAniInfoSRIndication

Enumerated Values:

1	off
2	on

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.2

This Boolean attribute indicates the capability of status
reporting. The value TRUE means that the status reporting
is available for all T-CONTs which are associated with the
ANI.

zxGponAniInfoTotalTcontNumber

Constraints:
range: 1-255

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.22.1.1.3

This attribute provides the total number of T-CONTs that are
able to be supported in this ANI port.

zxGponAniInfoGemBlockLength

Enumerated Values:

1	enabled
2	disabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.4

This attribute indicates the reporting block size for GEM mode in
units of bytes.

zxGponAniInfoPiggybackDbaReporting

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.5

This attribute provides a special code that indicates the piggyback
DBA reporting format capabilities of this ONT. ITU-T Rec.

Enumeration

.1.3.6.1.4.1.3902.1012.3.22.1.1.6

zxGponAniInfoWholeOnuDbaReporting

This attribute indicates whether or not whole ONU DBA reporting as specified
in ITU-T Rec. G.984.3 is supported by the ONU/ONT.

Enumeration

.1.3.6.1.4.1.3902.1012.3.22.1.1.7

zxGponAniInfoSFThreshold

This attribute represents the upstream/downstream BER threshold to detect SFi/SF alarm.
When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y).
The valid values are from 3 to 8 inclusive.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.8

zxGponAniInfoSDThreshold

This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm.
When this value is x in decimal, the BER threshold for SFi/SF is 10^(-x).
The valid values are from 4 to 10 inclusive.
Please note …

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.22.1.1.9

zxGponTcontInfoTable

table

.1.3.6.1.4.1.3902.1012.3.22.3 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponTcontInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponTcontInfoTable'

An instance of this managed entity represents a logical connection 
group that is associated with the Alloc-id. A T-CONT can accommodate 
ATM cells or GEM packets in priority queues or Traffic Schedulers 
that exist in the ATM or GEM layer.

zxGponTcontInfoEntry row .1.3.6.1.4.1.3902.1012.3.22.3.1

An entry in the T-CONT status information table.

Indexes

No indexes recorded

Column Syntax OID

zxGponTcontInfoIndex

An arbitrary(unique) integer for identifiying an entry
in the ANI management, from 1 to M.

Constraints:
range: 600-4000

.1.3.6.1.4.1.3902.1012.3.22.3.1.1

zxGponTcontInfoMeId

A unique number for each instance of this managed entity.

Constraints:
range: 100-1000

.1.3.6.1.4.1.3902.1012.3.22.3.1.2

zxGponTcontInfoAllocID

Alloc ID.

zxGponTcontInfoModeIndicator

Constraints:
range: 400-3000

.1.3.6.1.4.1.3902.1012.3.22.3.1.3

Mode indicator.

Enumeration

Enumerated Values:

1	nmsCreate
2	neCreate

.1.3.6.1.4.1.3902.1012.3.22.3.1.4

zxGponTcontInfoPolicy

Strategy.

Enumeration

.1.3.6.1.4.1.3902.1012.3.22.3.1.5

zxGpon8021pMapperTable

table

.1.3.6.1.4.1.3902.1012.3.23.1 · 1 row entry · 15 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGpon8021pMapperTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGpon8021pMapperTable'

One or more instances is used to associate the priorities of 802.1P priority
tagged frames with a specific connection.

zxGpon8021pMapperEntry row .1.3.6.1.4.1.3902.1012.3.23.1.1

One or more instances of the 802.1p Mapper entity.

Indexes

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxGponMACBSPInfoMeIdIdx

Column Syntax OID

zxGpon8021pMapperMeIdIdx

This attribute provides a unique number for each instance of this managed entity.

zxGpon8021pMapperPptpUniPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.1

An instance identifier of the PPTP UNI that is associated with this 802.1p Priority
Queue Mapper, in the case of direct 802.1p mapping. In the case of combined Bridging-
mapping, this pointer is not used, and its value …

zxGpon8021pMapperPri0IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.2

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 000 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri1IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.3

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 001 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri2IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.4

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 010 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri3IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.5

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 011 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri4IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.6

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 100 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri5IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.7

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 101 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri6IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.8

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 110 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperPri7IwTpPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.9

This attribute represents a pointer to the Interworking Termination Point that is
associated with P-Bit = 111 tagged frames. The value 0xFFFF is a null pointer.

zxGpon8021pMapperUntagFrmInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.10

This attribute indicates how the ONT should handle Untagged Ethernet frames received
across the associated Ethernet interface. Valid values include the following:
1: Convert from DSCP to 802.1p
2: Tag frame to a certai…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.1.1.11

zxGpon8021pMapperDscpTo8021pPri

This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked
frame option is 1('zxGpon8021pMapperUntagFrmInd' is dscpTo8021p), this attribute structure
can be considered a bitmap that rep…

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.23.1.1.12

zxGpon8021pMapperDefaultPri

This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked
frame option is 2('zxGpon8021pMapperUntagFrmInd' is tagFrmToVal), this attribute contains
the default P-Bit priority setting t…

zxGpon8021pMapperMgmtCtrlFlag

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.1.1.13

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.1.1.14

zxGpon8021pMapperEntryStatus

This attribute can be create and delete.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.1.1.15

zxGponUniInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.2 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponUniInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponUniInfoTable'

One or more instances of the UNI-G managed entity may be contained 
in an instance of a Subscriber Line Card managed entity.

zxGponUniInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.2.1

One or more instances of the UNI-G managed entity may be contained
in an instance of a Subscriber Line Card managed entity.

Indexes

No indexes recorded

Column Syntax OID

zxGponUniInfoIndex

An arbitrary(unique) integer for identifiying an entry
in the UNI management, from 1 to M.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.2.1.1

zxGponUniInfoMeId

This attribute provides a unique number for each instance of this managed entity.
This number is directly associated with the physical position of the UNI.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.2.1.2

zxGponUniInfoCfgOption

This attribute holds the UNI Configuration Code field.

Enumerated Values:

1	forward
2	discarded

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.2.1.3

zxGponUniInfoAdminState

When the Administrative State attribute is set to disabled(2), all user traffic to and from
this UNI is blocked and alarms for this UNI and all associated managed entities are no
longer generated.

Enumerationr/w

Enumerated Values:

1	nmsCreate
2	neCreate

.1.3.6.1.4.1.3902.1012.3.23.2.1.4

zxGponPPTPEthUniInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.1 · 1 row entry · 16 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPPTPEthUniInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPPTPEthUniInfoTable'

This managed entity represents the points at an Ethernet UNI in the ONT where
physical paths terminate and physical path level functions (e.g. Ethernet
function) are performed. An instance of this managed entity shall be automatically
created/deleted by the ONT upon the creation/deletion of a Subscriber Line Card of
Ethernet type

zxGponPPTPEthUniInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.1.1

One or more instances of this managed entity shall be contained in an instance of a
Subscriber Line Card managed entity classified as a native LAN type (e.g. Ethernet).

Indexes

No indexes recorded

Column Syntax OID

zxGponPPTPEthInfoTPID

An arbitrary(unique) integer for identifiying an entry in the PPTP Ethernet
information Table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.1

zxGponPPTPEthInfoMeId

This attribute provides a unique number for each instance of this managed entity.
This 2-byte number is directly associated with the physical position of the UNI.
The first byte is the slot id (defined in 7.1.3). The …

zxGponPPTPEthInfoExpectedType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.2

Coding Contents Description
0 no LIM Default value
1 A1.5 ATM 1.544 Mbit/s module …

zxGponPPTPEthInfoSensedType

Enumerated Values:

1	forward
2	filter

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.3

If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type'
equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00,
then the value of 'Sensed type' = one of the valu…

zxGponPPTPEthInfoAutoDetectCfg

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.4

For 10/100 Base-T Ethernet interfaces, this attribute is used to set the configuration options:
Auto-sensing: 0x00; 10Base-T: 0x01; 100Base-T: 0x02: Gigabit Ethernet: 0x03.

zxGponPPTPEthInfoEthLoopback

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.5

This attribute is used to set the Ethernet loopback configuration: No loopback
(value normal), Loop3 (value loop, Loopback of downstream traffic after PHY
transceiver). Loop 3 is depicted in Figure 11a. Upon autonomou…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.6

zxGponPPTPEthInfoAdminState

This attribute is used to activate (unlock: value enabled) and deactivate
(lock: value disabled) the functions performed by instances of this managed entity.
Selection of a default value for this attribute is outside …

Enumerationr/w

Constraints:
range: 24-24

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.7

zxGponPPTPEthInfoOperationalState

This attribute indicates whether or not this managed entity is capable of performing
its task. The operational state reflects the perceived ability to receive or to
generate a valid signal. Valid values are enabled (e…

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.8

zxGponPPTPEthInfoDuplexSpeedInd

For 10/100 Base-T Ethernet interfaces, it is used to set the configuration options:
Auto-sensing(incluing speed and duplex): 1; It comprises 'Auto detection configuration'
and 'DuplexInd' in G.983.2.It may be created/re…

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.9

zxGponPPTPEthInfoMaxFrameSize

It denotes the maximum allowed frame size to be transmitted across this interface.
It may be created/read/written/modified.Writing or modifing can be done when the
entry SHOULD NOT be used by any other entry.

zxGponPPTPEthInfoDTEorDCEInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.10

It indicates whether the Ethernet interface wiring is DTE(2) or DCE(1). It may be
created/read/written/modified.Writing or modifing can be done when the entry SHOULD
NOT be used by any other entry.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.11

zxGponPPTPEthInfoPauseTime

It allows the ONT line card to request that the customer terminal temporarily suspend sending
data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times of the particular
implementation).It may be created…

Integer32r/w

Enumerated Values:

1	forward
2	filter

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.12

zxGponPPTPEthInfoBridgedorIPInd

It indicates whether the Ethernet interface is bridged or derived from an IP router function
(Bridged: 1; IP router: 2; 3: depends on Subscriber Line Card.) 3 means that the SLC(Subscriber
Line Card) will be either Brid…

Enumerationr/w

Enumerated Values:

1	static
2	dynamic

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.13

zxGponPPTPEthInfoARC

It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting
allowed immediately and on means alarm reporting inhibited, until this ONT(managed entity) detects
a valid signal for the ti…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.14

zxGponPPTPEthInfoARCInterval

It provides a provisionable length of time. Units are given in minutes. It may
be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT
be used by any other entry.

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.15

zxGponPPTPEthInfoPppoeFilterEnable

It may be used to control filtering of PPPoE packets on this Ethernet port. The disabled is
used to disable filtering. The enabled is used to enable filtering. When filtering is enabled,
all packets other than PPPoE pac…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.1.1.16

zxGponMACBSPInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.2 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBSPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBSPInfoTable'

This managed entity is used to organize data that affects all ports on a MAC Bridge
at a bridged LAN Ethernet UNI interface on the ONT. Instances of this managed
entity are created and deleted by request of the OLT.''

zxGponMACBSPInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.2.1

This managed entity is used to organize data that affects all ports on a MAC Bridge
at a bridged LAN Ethernet UNI interface on the ONT.

Indexes

No indexes recorded

Column Syntax OID

zxGponMACBSPInfoMeIdIdx

This attribute provides a unique number for each instance of this managed entity.
The first byte is the slot id (defined in 7.1.3). If the UNI is integrated, this
value is 0x00. The second byte is the bridge group id,…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.1

zxGponMACBSPInfoSTPInd

It indicates whether or not a spanning tree algorithm(protocol) is enabled.
The value TRUE means enabled. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be used by any…

zxGponMACBSPInfoLearningInd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.2

It indicates whether or not the learning functions of the bridge are enabled.
The value TRUE means enabled. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be used by a…

Enumerated Values:

1	forwarded
2	filtered

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.3

zxGponMACBSPInfoPortBInd

It indicates whether or not bridging between FE ports is enabled. The value TRUE
means enabled. It may be created/read/written/modified.Writing or modifing can be
done when the entry SHOULD NOT be used by any other entr…

zxGponMACBSPInfoHelloTime

Enumerated Values:

1	forwarded
2	filtered

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.4

zxGponMACBSPInfoPriority

It indicates the bridge priority set on the LAN card(or MAC bridge). The value of this
object is reflected to the BridgePriority attribute of the MAC Bridge Configuration Data
managed entity. It may be created/read/writ…

Integer32r/w

Enumerated Values:

1	nmsCreate
2	neCreate

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.5

zxGponMACBSPInfoMaxAge

The maximum age of Spanning Tree Protocol information learned from the network on any
port before it is discarded, in units of hundredths of a second. But G.983.2 in units
of 256ths of a second, The range is 0x0600 to 0…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.6

It uses for HelloTime when this bridge is acting as the root or that a bridge advertises
its presence while as a root or attempting to become a root, in units of hundredths of a
second. But G.983.2 in units of 256ths of…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.7

zxGponMACBSPInfoForwardDelay

It uses for ForwardDelay when this bridge is acting as the root or that the bridge on the
Ethernet card in the ONT retains a packet before forwarding it, in units of hundredths of a
second. But G.983.2 in units of 256th…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.8

zxGponMACBSPInfoMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.9

zxGponMACBSPInfoEntryStatus

This attribute can be create and delete.

zxGponMACBCfgDataBridgeMACAddress

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.2.1.10

zxGponMACBridgeCfgDataInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.3 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBridgeCfgDataInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBridgeCfgDataInfoTable'

This managed entity is used to organize and record data that is associated with
bridged LAN configurations. Some of the data is volatile. Instances of this
managed entity shall be automatically created/deleted by the ONT upon the
creation/deletion of a MACBridgeServiceProfile.

zxGponMACBridgeCfgDataInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.3.1

This managed entity is associated with one instance of a MACBridgeServiceProfile.

Indexes

No indexes recorded

Column Syntax OID

This attribute indicates the MAC address used by the bridge. Upon autonomous
instantiation, this attribute consists of all 0x00.

zxGponMACBCfgDataBridgePriority

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.1

This attribute denotes the priority of the bridge and is positive
integer-valued. Upon autonomous instantiation, the value 0x8000 is used.

zxGponMACBCfgDataDesignatedRoot

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.2

This attribute provides the bridge identifier for the root of the spanning
tree. This attribute consists of Bridge Priority (2 bytes) and MAC
address (6 bytes).

zxGponMACBCfgDataRootPathCost

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.3

This attribute provides the cost of the best path to the root as seen
from the bridge. Upon autonomous instantiation, the value 0x00 is used.

zxGponMACBCfgDataBridgePortCount

Enumerated Values:

1	activate
2	deactivate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.4

This attribute provides the number of existing ports controlled by this bridge.

zxGponMACBCfgDataRootPortNum

Enumerated Values:

1	up
2	down

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.5

This attribute provides the port number that has the lowest cost from the
bridge to the root bridge. The value 0x00 means that the port itself is the root.
Upon autonomous instantiation, the value 0x00 is used.

zxGponMACBCfgDataHelloTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.6

This attribute provides the time interval (in 256ths of a second) between hello
packets. It is the 'HelloTime' received from the designated root. The range
is 0x0100 to 0x0a00 (1 s to 10 s) in accordance with IEEE 802…

zxGponMACBCfgDataForwardDelay

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.7

This attribute gives the time (in 256ths of a second) that the bridge on the
Ethernet card in the ONT retains a packet before forwarding it. It is the
'ForwardDelay' time received from the designated root. The range i…

zxGponMACBriPortCfgDataMeIdIdx

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.3.1.8

zxGponMACBriPortCfgDataInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.4 · 1 row entry · 12 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBriPortCfgDataInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBriPortCfgDataInfoTable'

This managed entity is used to organize and record data that is associated
with a bridge port. Some of the data is volatile. Instances of this managed
entity are created and deleted by request of the OLT.

zxGponMACBriPortCfgDataInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.4.1

Zero or more instances of this managed entity shall be contained in an
instance of the MACBridgeServiceProfile.

Indexes

No indexes recorded

Column Syntax OID

This attribute provides a unique number for each instance of this managed entity.

zxGponMACBriPortCfgDataBridgeIdPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.1

This attribute identifies the MAC bridge controlling the port. This attribute
points to the instance of the MACBridgeServiceProfile.

zxGponMACBriPortCfgDataPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.2

This attribute provides the port number.

zxGponMACBriPortCfgDataTPType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.3

This attribute identifies the type of the termination point associated with
this MAC bridge port. The value is set to 0x01 if this bridge port is associated
with the LAN side's termination point. The value is set to 0…

zxGponMACBriPortCfgDataTPPointer

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.4

This attribute points to the termination point associated with this MAC bridge
port. The value of this attribute is the same as the id of the Physical Path
Termination Point Ethernet UNI associated with this MAC bridg…

zxGponMACBriPortCfgDataPortPriority

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.5

This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).

zxGponMACBriPortCfgDataPortPathCost

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.6

This attribute provides the cost contribution of the port to the path cost towards
the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535).

zxGponMACBriPortCfgDataPortSpanTreeInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.7

This Boolean attribute indicates whether or not STP is enabled at this port.
The value TRUE means enabled.

zxGponMACBriPortCfgDataEncapMethod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.8

This attribute identifies the frame encapsulation method that is used. Value
0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous
instantiation, the value 0x00 is used.

zxGponMACBriPortCfgDataLANFCSInd

Enumerated Values:

1	enabled
2	disabled

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.9

This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded
(value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous instantiation,
the value 0x00 is used.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.10

zxGponMACBriPortCfgDataMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

Enumerated Values:

1	extendedSuperFrame
2	superFrame
3	unFrame
4	g704
5	jt-g704

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.11

zxGponMACBriPortCfgDataEntryStatus

This attribute can be create and delete.

zxGponMACBriPortFilterTableMacAddr

Enumerated Values:

1	b8zs
2	ami
3	hdb3
4	b3zs

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.4.1.12

zxGponMACBriPortFilterTableInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.5 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBriPortFilterTableInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBriPortFilterTableInfoTable'

This managed entity is used to organize and record data that is associated with a
bridge port. Some of the data is volatile. Instances of this managed entity shall
be automatically created/deleted by the ONT upon the creation/deletion of a
MACBridgePortConfigurationData managed entity.

zxGponMACBriPortFilterTableInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.5.1

Alternative schemes for this managed entity may be included in future Recommendations.

Indexes

No indexes recorded

Column Syntax OID

This attribute lists destination MAC Addresses associated with the bridge port.

zxGponMACBriPortFilterTableAction

Enumerated Values:

1	off
2	on

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.5.1.1

Enumerationr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.3902.1012.3.23.8.5.1.2

zxGponMACBriPortFilterTableEntryStatus

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxGponCESSPInfoMeIdIdx

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.5.1.3

zxGponMACBriPortDesignationDataTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.6 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBriPortDesignationDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBriPortDesignationDataTable'

This managed entity is used to organize and record data that is associated with a bridge port.
Some of the data is volatile. Instances of this managed entity shall be automatically created/
deleted by the ONT upon the creation/deletion of a MACBridgePortConfigurationData.

zxGponMACBriPortDesignationDataEntry row .1.3.6.1.4.1.3902.1012.3.23.8.6.1

Indexes

Column	Syntax	OID
zxGponMACBriPortDesignationDataRootCostPort This attribute provides the Designated Root, Designated Cost, Designated Bridge, and Designated Port outputs of the 'Read port parameters' operation defined in 14. 8.2.1 of IEEE 802.1D [14], i.e., -bridge identifier of …	OctetString	`.1.3.6.1.4.1.3902.1012.3.23.8.6.1.1`
zxGponMACBriPortDesignationDataPortState This attribute provides status information on the port. Valid values include 'disabled'(value 0x00), 'listening' (value 0x01), 'learning' (value 0x02), 'forwarding' (0x03), 'blocking' (value 0x04), 'linkdown' (value 0x0…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.8.6.1.2`

zxGponMACBriPortAddrInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.7 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponMACBriPortAddrInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponMACBriPortAddrInfoTable'

This managed entity is used to organize and record data that is associated with a bridge port.
Some of the data is volatile. Instances of this managed entity shall be automatically created/
deleted by the ONT upon the creation/deletion of a MACBridgePortConfigurationData.

zxGponMACBriPortAddrInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.7.1

Alternative schemes for this managed entity may be included in future Recommendations.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponMACBriPortAddrMacAddr This attribute lists destination MAC Addresses associated with the bridge port.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.3902.1012.3.23.8.7.1.1`
zxGponMACBriPortAddrAction	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.7.1.2`
zxGponMACBriPortAddrDynStatic	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.7.1.3`
zxGponMACBriPortAddrAgingTime Age in seconds (1s to 4095s)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.8.7.1.4`

zxGponIpRouterSPInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.8 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponIpRouterSPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponIpRouterSPInfoTable'

This managed entity is used to organize data that affects all ports on an IP router
on a routed LAN UNI interface on the ONT. Instances of this managed entity are created
and deleted by request of the OLT.''

zxGponIpRouterSPInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.8.1

This managed entity is used to organize data that affects all ports on an IP router
on a routed LAN UNI interface on the ONT.

Indexes

No indexes recorded

Column Syntax OID

zxGponIpRouterSPInfoMeIdIdx

This attribute provides a unique number for each instance of this managed entity.

zxGponIpRouterSPInfoForwardingInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.1

This boolean attribute indicates whether or not forwarding of IP packets as
a whole is enabled. The value TRUE means enabled. The initial value is enabled.

zxGponIpRouterSPInfoProxyARPInd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.2

This boolean attribute indicates whether or not proxy ARP is enabled.
The value TRUE means enabled. The initial value is enabled.

zxGponIpRouterSPInfoDirectedBroadcastInd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.3

This boolean attribute indicates whether or not relaying of directed broadcast
packets is enabled. The value TRUE means enabled. The initial value is disabled.

zxGponIpRouterSPInfoUpstreamMulticastFiltering

Enumerated Values:

1	enabled
2	disabled

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.4

This attribute indicates whether upstream IP multicast packets are
forwarded (value 0x01) or filtered (value 0x01). The initial value is 0x02.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.5

zxGponIpRouterSPInfoDownstreamMulticastFiltering

This attribute indicates whether upstream IP multicast packets are
forwarded (value 0x01) or filtered (value 0x01). The initial value is 0x02.

Enumerationr/w

Enumerated Values:

1	normal
2	loopback

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.6

zxGponIpRouterSPInfoMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

Enumerated Values:

1	nmsCreate
2	neCreate

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.7

zxGponIpRouterSPInfoEntryStatus

This attribute can be create and delete.

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxGponGemIWTPAlarmIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.8.1.8

zxGponIpPortCfgDataInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.8.9 · 1 row entry · 15 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponIpPortCfgDataInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponIpPortCfgDataInfoTable'

This managed entity is used to organize data that is associated with IP address
and IP port provisioning. Instances of this managed entity are created and
deleted by request of the OLT.

zxGponIpPortCfgDataInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.8.9.1

Zero or more instances of this managed entity shall be contained in an
instance of the IP Port configuration data.

Indexes

Column Syntax OID

zxGponIpPortCfgDataMeIdIdx

This attribute provides a unique number for each instance of this managed entity.

zxGponIpPortCfgDataPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.1

This attribute identifies the port at which IP provisioning takes place.

zxGponIpPortCfgDataTPType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.2

This attribute identifies the type of the termination point associated with this IP port.
The value is set to 0x01 if this IP port is associated with the LAN side's TP.
The value is set to 0x02 if this IP port is asso…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.3

zxGponIpPortCfgDataTPPointer

This attribute points to the instance of the TP associated with this port. When this IP
port is associated with the LAN side's TP, this attribute points to the instance of the
PPTP Ethernet UNI. When this IP port is a…

zxGponIpPortCfgDataPortAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.4

This attribute identifies the provisioned IP address.
When an IP address is not assigned, this attribute consists of all 0x00.

zxGponIpPortCfgDataPortMask

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.5

This attribute identifies the address mask associated with the provisioned IP address.
When an IP address mask is not assigned, this attribute consists of all 0x00.

zxGponIpPortCfgDataUnnumbered

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.6

This boolean attribute indicates whether or not this IP port has an IP address.
The value TRUE means unnumbered. (For future use by IP router function.).

zxGponIpPortCfgDataAdministrativeState

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.7

This boolean attribute is used to activate (unlock, value 0x01) and
deactivate (lock, value 0x02) the functions performed by instances of this managed entity.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.8

zxGponIpPortCfgDataPortState

This boolean attribute provides status information on the port,
Valid values include 'up' (value 0x01) and 'down' (value 0x02).

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.9

zxGponIpPortCfgDataAllowRemoteAccess

This boolean attribute indicates whether or not this IP port may be accessed remotely.
The value TRUE means remote access is enabled.

zxGponIpPortCfgDataRouterIdPointer

Enumerated Values:

1	uni2ani
2	ani2uni
3	bidirectional

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.10

This attribute identifies the IP router controlling the port, if it exists.
This attribute points to the instance of the IP Router Service Profile.
If no IP router controls the port, this attribute consists of a null …

zxGponIpPortCfgDataARPPointer

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.11

This attribute identifies the instance of ARP Service Profile associated with the IP port.

zxGponIpPortCfgDataEncapsulationMethod

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.12

This attribute identifies the frame encapsulation method that is used,
Value 0x01: identification by ATM VC;
value 0x02: LLC encapsulation,
Upon autonomous instantiation, the value 0x00 is used.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.13

zxGponIpPortCfgDataMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.14

zxGponIpPortCfgDataEntryStatus

This attribute can be create and delete.

Enumerated Values:

1	nmsCreate
2	neCreate

Description:

.1.3.6.1.4.1.3902.1012.3.23.8.9.1.15

zxGponPPTPCesUniTable

table

.1.3.6.1.4.1.3902.1012.3.23.9.1 · 1 row entry · 14 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPPTPCesUniTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPPTPCesUniTable'

This managed entity represents the points at a CES UNI in the ONT where physical
paths terminate and physical path level functions are performed.

zxGponPPTPCesUniEntry row .1.3.6.1.4.1.3902.1012.3.23.9.1.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponPPTPCesUniTPID An arbitrary(unique) integer for identifiying an entry in the PPTP ces information Table.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.1`
zxGponPPTPCesUniMeId This attribute provides a unique number for each instance of this managed entity. This 2-byte number is directly associated with the physical position of the UNI. The first byte is the slot id (defined in 7.1.3). The …	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.2`
zxGponPPTPCesUniExpectedType Coding Contents Description 0 no LIM Default value 1 A1.5 ATM 1.544 Mbit/s module …	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.3`
zxGponPPTPCesUniSensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then the value of 'Sensed type' = one of the values…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.4`
zxGponPPTPCesUniEesLoopback This attribute represents the loopback configuration of the physical interface. Value 0x00: no loopback; value 0x01: payload loopback; value 0x02: line loopback; value 0x03: OpS-directed loopback1 (loopback from/to …	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.5`
zxGponPPTPCesUniAdminState This attribute is used to activate (unlock: value enabled) and deactivate (lock: value disabled) the functions performed by instances of this managed entity. Selection of a default value for this attribute is outside t…	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.6`
zxGponPPTPCesUniOperationalState This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x0…	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.7`
zxGponPPTPCesUniDS1Framing This attribute indicates the framing structure used. Valid values are 'ExtendedSuperFrame,(0x01), 'SuperFrame' (0x02), 'UnFrame' (0x03), 'G.704' (0x04) and 'JT-G.704' (0x05). Upon autonomous instantiation, the value …	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.8`
zxGponPPTPCesUniEncoding This attribute denotes the encoding scheme required. Valid values are 'B8ZS'(value 0x01), 'AMI' (value 0x02), 'HDB3' (0x03), and 'B3ZS' (0x04). Upon autonomous instantiation, the value 0x01 is used.	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.9`
zxGponPPTPCesUniLineLength This attribute provides the length of the twisted pair cable from the physicalPathTTP of type 'DS1' interface to the DSX1 cross-connect point or the length of the DS3 cable from the physicalPathTTP of type 'DS3' to the …	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.10`
zxGponPPTPCesUniDS1Mode This attribute indicates the mode of DS1 used. The valid values are 'Mode#1'(value 0x00), 'Mode#2' (value 0x01), 'Mode#3' (value 0x02), and 'Mode#4' (value 0x03). Moreover, each Mode is defined as described in Table 6…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.11`
zxGponPPTPCesUniARC It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting allowed immediately and on means alarm reporting inhibited, until this ONT(managed entity) detects a valid signal for the ti…	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.12`
zxGponPPTPCesUniARCInterval It provides a provisionable length of time. Units are given in minutes. It may be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT be used by any other entry.	Integer32r/w	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.13`
zxGponPPTPCesUniLineType This attribute denotes the line type used in the application for DS3 or E3 interfaces. Valid values are: 0x00, Other; 0x01, ds3m23; 0x02, ds3syntran; 0…	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.23.9.1.1.14`

zxGponCESSPInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.9.2 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponCESSPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponCESSPInfoTable'

An instance of this managed entity is used to organize data that describe the CES Service 
functions of the ONT. An instance of this managed entity shall be created and deleted by the OLT.

zxGponCESSPInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.9.2.1

Indexes

No indexes recorded

Column Syntax OID

zxGponCESSPInfoMeIdIdx

This attribute provides a unique number for the instance of this managed entity.

zxGponCESSPInfoMBufferedCDVTolerance

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.9.2.1.1

This attribute represents the duration of user data that must be buffered
by the CES interworking entity to offset the Cell Delay Variation.
This timing will be in 10 microseconds increment. The default value for DS1 …

zxGponCESSPInfoChannelAssociatedSignalling

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.9.2.1.2

This attribute selects which AAL 1 format should be used. It applies to structured
interfaces only. For unstructured interfaces, this value, if present, must be set to
the default of 0x00. The valid values are basic (…

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.9.2.1.3

zxGponCESSPInfoMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.9.2.1.4

zxGponCESSPInfoEntryStatus

This attribute can be create,modify and delete.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.9.2.1.5

zxGponGemIWTPInfoTable

table

.1.3.6.1.4.1.3902.1012.3.23.12 · 1 row entry · 11 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemIWTPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemIWTPInfoTable'

An instance of this managed entity represents a point in the ONT where the 
interworking of a service (e.g., CES, IP) or underlying physical infrastructure 
(e.g., nxDS0/DS1/DS3/E3/Ethernet) to GEM layer takes place.

zxGponGemIWTPInfoEntry row .1.3.6.1.4.1.3902.1012.3.23.12.1

Instances of this managed entity are created and deleted by the ONT on request
of the OLT.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemIWTPInfoMeIdIdx

An arbitrary(unique) integer for identifiying an entry in the UNI management,
from 1 to M. his attribute provides a unique number for each instance of this
managed entity. This number is directly associated with the phy…

zxGponGemIWTPInfoPNCTPConnectivityPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.12.1.1

This attribute provides an instance identifier of the GEM Port
Network CTP that is associated with this GEM Interworking Termination Point.

zxGponGemIWTPInfoIwOption

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.12.1.2

It identifies the type of non-GEM function that is being interworked; the option
can be CES (1) or MAC Bridge LAN (2).It may be created/read/written/modified.
Writing or modifing can be done when the entry SHOULD NOT be…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.23.12.1.3

zxGponGemIWTPInfoServiceProPtr

It provides the service profile type and a pointer to the instance of a service profile,
such as the CES Service ProfileB-PON (if the zxGponGemIwTPTempletIwOption = 0) or MAC
Bridge Service Profile (if the zxGponGemIwTP…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.12.1.4

zxGponGemIWTPInfoITPPtr

This attribute provides a pointer to the associated instance(s) of
the following managed entities (depending on the service provided).

zxGponGemIWTPInfoPPTPCounter

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.12.1.5

This attribute represents the number of instances of PPTP managed entities
associated with this instance of the GEM Interworking Termination Point
managed entity.

zxGponGemIWTPInfoGALProPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.12.1.6

zxGponGemIWTPInfoOpState

This attribute indicates whether or not this managed entity is capable of
performing its task. The operational state reflects the perceived ability to
receive or to generate a valid signal. This value is set to enable…

Enumeration

.1.3.6.1.4.1.3902.1012.3.23.12.1.7

For GEM mode, it provides the GAL profile type and a pointer to an instance of a GAL
Profile such as GAL TDM Profile if the zxGponGemIwTPTempletIwOption = 0 or GAL Ethernet
Profile if the zxGponGemIwTPTempletIwOption = …

zxGponGemIWTPInfoGEMLoopbackCfg

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1012.3.23.12.1.8

This attribute is used to set the loopback configuration when using GEM mode.

Enumerationr/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1012.3.23.12.1.9

zxGponGemIWTPInfoMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1012.3.23.12.1.10

zxGponGemIWTPInfoEntryStatus

This attribute can be create and delete.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.23.12.1.11

zxGponGemIWTPAlarmTable

table

.1.3.6.1.4.1.3902.1012.3.23.13 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemIWTPAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemIWTPAlarmTable'

An instance of this managed entity represents a point in the ONT where the 
interworking of a service (e.g., CES, IP) or underlying physical infrastructure 
(e.g., nxDS0/DS1/DS3/E3/Ethernet) to GEM layer takes place.

zxGponGemIWTPAlarmEntry row .1.3.6.1.4.1.3902.1012.3.23.13.1

Instances of this managed entity are created and deleted by the ONT on request
of the OLT.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemIWTPAlarmIndex

An arbitrary(unique) integer for identifiying an entry
in the UNI management, from 1 to M.

Enumerated Values:

1	enable
2	disable

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.13.1.1

zxGponGemIWTPAlarmMeId

This attribute provides a unique number for each instance of this managed entity.
This number is directly associated with the physical position of the UNI.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.23.13.1.2

zxGponGemIWTPGFSAAlarm

It is used to Indicate that GEM Frame Starve Alarm. When this is true(1) meadn that the Alarm
is presented, when false(2), mean there is no this alarm.

zxGponGemIWTPGFSAAlarmMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.13.1.3

Indicates whether the occurence of zxGponGemITPGFSAAlarm alarm
should result in NE generated by the agent layer. When this is false(2)
it should be generated; When true(1), not generated.

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxGponPriorQueueAlarmIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.23.13.1.4

zxGponGemPNCTPInfoTable

table

.1.3.6.1.4.1.3902.1012.3.24.1 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPNCTPInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPNCTPInfoTable'

This managed entity is used to represent the termination of GEM ports on an ONT.

zxGponGemPNCTPInfoEntry row .1.3.6.1.4.1.3902.1012.3.24.1.1

Instances of the GEM Port Network CTP managed entity will be created on demand
of the OLT as a consequence of action 'create' on the GEM Port Network CTP
managed entity.

Indexes

Column Syntax OID

zxGponGemPNCTPInfoMeIdIdx

An arbitrary(unique) integer for identifiying an entry in the ONT equipment,
from 1 to M, it is MeId.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.1

zxGponGemPNCTPInfoPortId

This attribute identifies the PortID associated with the GEM port being terminated.

zxGponGemPNCTPInfoPONTCAdapterGPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.2

This attribute associates the GEM Port Network CTP ME with the PON TC Adapter-G ME. It
points to the connected PON TC Adapter-G instance id. If use template, the value of this
attribute is not a pointer, it just a tem…

zxGponGemPNCTPInfoDirection

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.3

It specifies whether the GEM port is used for UNI-to-ANI (uni2uni(1)), ANI-to-UNI(
ani2uni(2)), or bidirectional (bidirectional(3)) connection. It may be created/read/
written/modified.Writing or modifing can be done wh…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.24.1.1.4

zxGponGemPNCTPInfoPriorityUpstream

This attribute points to the instance of the Priority Queue-G ME used for this GEM Port
Network CTP ME in the upstream direction. It is used when the Traffic Management Option
attribute in ONT-G ME is 0x00; this point…

zxGponGemPNCTPInfoPriorityDownstream

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.5

This attribute points to the instance of the Priority Queue-G used for this GEM Port Network
CTP in the downstream direction. It is used when the Traffic Management Option attribute in
ONT-G is 0x00; this pointer is nu…

zxGponGemPNCTPInfoTDescProfPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.6

It serves as a pointer to the instance of the Traffic Descriptor Profile managed entity
that contains the traffic parameters used for this GEM Port Network CTP entry. This
attribute is used when the Traffic Management …

zxGponGemPNCTPInfoUniCounter

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.7

This attribute represents the number of instances of UNI-G managed entity associated with an
instance of the GEM Port Network CTP managed entity. If only one instance of a UNI-G managed
entity is associated with an in…

zxGponGemPNCTPInfoMgmtCtrlFlag

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.1.1.8

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.24.1.1.9

zxGponGemPNCTPInfoEntryStatus

This attribute can be create and delete.

zxGponGemPNCTPAlarmCfgMeId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.24.1.1.10

zxGponGemPNCTPAlarmCfgTable

table

.1.3.6.1.4.1.3902.1012.3.24.2 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPNCTPAlarmCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPNCTPAlarmCfgTable'

This managed entity is used to represent the termination of GEM ports on an ONT.

zxGponGemPNCTPAlarmCfgEntry row .1.3.6.1.4.1.3902.1012.3.24.2.1

Instances of the GEM Port Network CTP managed entity will be created on demand
of the OLT as a consequence of action 'create' on the GEM Port Network CTP
managed entity.

Indexes

No indexes recorded

Column Syntax OID

A unique number for each instance of this managed entity.

zxGponGemPNCTPAlarmCfgE2eLossContinuity

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.2.1.1

Loss of continuity can be detected when the GEM Port Network CTP supports a GEM
Interworking Termination Point. set this attribute is true(1) if End to end loss continuity occured,
otherwise, this attribute is false(2…

zxGponGemPNCTPAlarmCfgE2eLossContinuityMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.2.1.2

Indicates whether the occurence of zxGponGemPNCTPAlarmCfgE2eLossContinuity alarm
should result in NE generated by the agent layer. When this is false(2)
it is generated; When true(1), it is not generated.

zxGponGemPPPMHDInfoMeIdIdx

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.2.1.3

zxGponGemPPPMHDInfoTable

table

.1.3.6.1.4.1.3902.1012.3.24.3 · 1 row entry · 9 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPPPMHDInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPPPMHDInfoTable'

This managed entity is used to collect and report performance monitoring data 
associated with a GEM Port Network CTP for the last completed 15-minute interval.

zxGponGemPPPMHDInfoEntry row .1.3.6.1.4.1.3902.1012.3.24.3.1

This managed entity is used to collect and report performance monitoring data
associated with a GEM Port Network CTP for the last completed 15-minute interval.

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry in the performance monitoring data
reporting, from 1 to M. This attribute provides a unique number for each instance of this
managed entity. The assigned number is…

zxGponGemPPPMHDInfoIntervalEndTime

Enumerated Values:

1	nmsCreate
2	neCreate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.1

This attribute identifies the most recently finished 15-minute interval. It is a cyclic
counter (modulo 0x100 (256)) that is incremented each time a new interval is finished
and the actual counters are updated. The va…

zxGponGemPPPMHDInfoThresholdDataID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.2

This attribute provides a pointer to instances of the Threshold Data 1 and 2
managed entities that contain the threshold values for the performance monitoring
data collected by this managed entity.

zxGponGemPPPMHDInfoLostPackets

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.3

This attribute measures background packet loss. It cannot distinguish between
packets lost because of header bit errors or buffer overflows. It records only
loss of information. The unit of this counter is GEM frame. …

zxGponGemPPPMHDInfoMisinsertedPackets

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.4

This attribute is used to measure occurrences of when a packet is misrouted to an
active GEM port that is being monitored. The unit of this counter is GEM frame. If
the actual counter saturates, it remains on its maxi…

zxGponGemPPPMHDInfoReceivedPackets

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.5

This attribute provides a count of all packets that are correctly received at the
monitored GEM port. The unit of this counter is GEM frame.

zxGponGemPPPMHDInfoReceivedBlocks

Constraints:
range: 0-64

.1.3.6.1.4.1.3902.1012.3.24.3.1.6

This attribute provides a count of all blocks that are correctly received at the
monitored GEM port. The unit of this counter is GEM block length.

zxGponGemPPPMHDInfoTransmittedBlocks

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.7

This attribute provides a count of all blocks that are originated at a monitored
connection by the transmitting end point (i.e., backward reporting is assumed).
The unit of this counter is GEM block length.

zxGponGemPPPMHDInfoImpairedBlocks

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.8

This severely errored data block counter will be incremented whenever one of the
following events takes place: the number of misinserted packets exceeds M(misinserted),
the number of bipolar violations exceeds M(error…

zxGponGemPPPMHDAlarmCfgMeId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.3.1.9

zxGponGemPPPMHDAlarmCfgTable

table

.1.3.6.1.4.1.3902.1012.3.24.4 · 1 row entry · 7 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPPPMHDAlarmCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPPPMHDAlarmCfgTable'

This notification is used to notify the management system when a threshold 
crossing alert (TCA) is detected or cleared. The TCA change notification 
'on' will be sent at the crossing of the threshold; the TCA change notification 
'off' will be sent at the end of the 15-minute period since that is when the 
counters are reset to 0x00.

zxGponGemPPPMHDAlarmCfgEntry row .1.3.6.1.4.1.3902.1012.3.24.4.1

This notification is used to notify the management system when a threshold
crossing alert (TCA) is detected or cleared. The TCA change notification
'on' will be sent at the crossing of the threshold; the TCA change no…

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry
in the ONT equipment, from 1 to M.

zxGponGemPPPMHDAlarmCfgLosPkgs

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.24.4.1.1

Lost packets exceeds threshold alarm. If the lost packets exceeds threshold event occured, this
value is true(1), otherwise, this value is false(2).

zxGponGemPPPMHDAlarmCfgLosPkgsMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.2

The mask bit for lost packets exceeds threshold alarm.

zxGponGemPPPMHDAlarmCfgMisInsertPkgs

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.3

Misinserted packets exceeds threshold alarm. If the misinserted packets exceeds threshold event
occured, this value is true(1), otherwise, this value is false(2).

zxGponGemPPPMHDAlarmCfgMisInsertPkgsMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.4

The mask birt for misinserted packets exceeds threshold alarm.

zxGponGemPPPMHDAlarmCfgImpairBlks

Constraints:
range: 0-64

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.5

Impaired blocks exceeds threshold alarm. If the impaired blocks exceeds threshold event
occured, this value is true(1), otherwise, this value is false(2).

zxGponGemPPPMHDAlarmCfgImpairBlksMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.6

The mask birt for impaired blocks exceeds threshold alarm.

zxGponPriorQueueAlarmIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.24.4.1.7

zxGponPriorityQueueTable

table

.1.3.6.1.4.1.3902.1012.3.25.1 · 1 row entry · 14 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPriorityQueueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPriorityQueueTable'

This managed entity specifies the priority queue in the ONT that is used for the
VP Network CTP-G or GEM Port Network CTP.

If N priority queues reside in the ONT, the Subscriber Line Card, ONT core or PON
IF Line Card, N instances of Priority Queue-G management entity will be automatically
created by the ONT following the creation of the Subscriber Line Card or T-CONT ME.
In ANI side, the Priority Queue-G ME is related to T-CONT ME. After instances of
T-CONT ME are created, instances of Priority Queue-G ME should be created autonomously.

Note that the OLT will find all the queues by reading the Priority Queue-G managed entity
instances. If the OLT tries to retrieve a non-existing priority queue, this will be
indicated in the response from the ONT to the OLT.

zxGponPriorityQueueAlarmCfgTable

table

.1.3.6.1.4.1.3902.1012.3.25.2 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPriorityQueueAlarmCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPriorityQueueAlarmCfgTable'

zxGponPriorityQueueAlarmCfgEntry row .1.3.6.1.4.1.3902.1012.3.25.2.1

Indexes

No indexes recorded

Column Syntax OID

zxGponPriorQueueAlarmMeId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.2.1.1

zxGponPriorQueueAlarmCellLosThresh

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.2.1.2

zxGponPriorQueueAlarmCellLosThreshMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.25.2.1.3

zxGponMgmtPonOltId zxGponMgmtPonOnuId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.25.2.1.4

zxGponTrafficScheduleTable

table

.1.3.6.1.4.1.3902.1012.3.25.3 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponTrafficScheduleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponTrafficScheduleTable'

An instance of this managed entity represents a logical object of some Traffic Scheduler to
control upstream ATM cells or GEM packets. A Traffic Scheduler can accommodate ATM cells or
GEM packets after priority queue or other Traffic Scheduler and transfer ATM cells or GEM
packets toward the next Traffic Scheduler or T-CONT.

zxGponTrafficScheduleEntry row .1.3.6.1.4.1.3902.1012.3.25.3.1

G.984.4 Section 9.5.2

Indexes

Column Syntax OID

zxGponTrafficScheduleIndex

An arbitrary(unique) integer for identifiying an entry
in the Ani manangement, from 1 to M.

zxGponTrafficScheduleMeId

Enumerated Values:

1	us
2	ds
3	both

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.3.1.1

This attribute provides a unique number for each instance of this managed entity.
This 2-byte number is associated with the physical capability that realizes the
Traffic Scheduler. The first byte is the slot id of the…

zxGponTrafficScheduleTCountPtr

Enumerated Values:

1	start
2	stop

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.3.1.2

This attribute represents the T-CONT ME instance that is directly associated with this
Traffic Scheduler. This pointer is used when this Traffic Scheduler is connected to the
T-CONT directly, it is null (0x0000) other…

zxGponTrafficScheduleOtherPtr

Enumerated Values:

1	aes
2	other

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.3.1.3

This attribute represents the Traffic Scheduler-G ME instance that serves this Traffic
Scheduler. Upon autonomous instantiation this attribute is null (0x0000). This pointer
is used when this Traffic Scheduler is conn…

zxGponTrafficSchedulePolicy

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.3.1.4

This attribute represents scheduling policy. Valid values include but are not limited
to 'Null' (value 0x03), 'HOL' (value 0x01) or 'WRR' (value 0x02). Upon autonomous
instantiation, this attribute consists of the val…

Enumeration

.1.3.6.1.4.1.3902.1012.3.25.3.1.5

zxGponTrafficSchedulePriWeight

It represents priority for HOL scheduling or the weight for WRR scheduling.
This value is used by the T-CONT or Traffic Scheduler indicated by the T-CONT
Pointer attribute or Traffic Scheduler Pointer attribute. If the…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.25.3.1.6

zxGponGemTrafficDescriptorsTable

table

.1.3.6.1.4.1.3902.1012.3.25.4 · 1 row entry · 5 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemTrafficDescriptorsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemTrafficDescriptorsTable'

zxGponGemTrafficDescriptorsEntry row .1.3.6.1.4.1.3902.1012.3.25.4.1

Indexes

zxGponMgmtPonOltId zxGponMgmtPonOnuId

Column Syntax OID

zxGponGemTrafficDescriptorsMeIdIdx

zxGponGemTrafficDescriptorsSIR

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.4.1.1

It is SIR (Sustained Information Rate). The unit of Kbps. It may be created/read/
written/modified.Writing or modifing can be done when the entry SHOULD NOT be used
by any other entry.

zxGponGemTrafficDescriptorsPIR

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.4.1.2

It is PIR (Peak Information Rate). The unit of Kbps. It may be created/read/written/
modified.Writing or modifing can be done when the entry SHOULD NOT be used by any
other entry.

zxGponGemTrafficDescriptorsMgmtCtrlFlag

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.25.4.1.3

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.25.4.1.4

zxGponGemTrafficDescriptorsEntryStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.25.4.1.5

zxGponBandwidthProfileTable

table

.1.3.6.1.4.1.3902.1012.3.26.1 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponBandwidthProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponBandwidthProfileTable'

Bandwidth allocation for one T-CONT in some ONT.
these bandwidths as following:
fixed bandwidth        ab. FBW
assured bandwidth      ab. ABW
non-assured bandwidth  ab. NABW
best effort bandwidth  ab. BEBW
additional bandwidth   ab. AddBW
guaranteed bandwidth   ab. GBW
maximum bandwidth      ab. MaxBW
minimum bandwidth      ab. MinBW
AddBW = NABW + BEBW
GBW   = FBW  + ABW
MaxBW = GBW  + AddBW
MinBW = FBW?
NABW, BEBW, FBW and ABWare able to participate in DBA

zxGponBandwidthProfileEntry row .1.3.6.1.4.1.3902.1012.3.26.1.1

An entry in the Bandwidth profile table.

Indexes

No indexes recorded

Column Syntax OID

zxGponBWProfileIndex

An arbitrary(unique) integer for identifiying an entry
in the line card, from 1 to M, M is equal to 512.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.1.1.1

zxGponBWProfileName

The Bandwidth Profile Name.It may be created/read/written/modified.
Writing or modifing can be done all the time.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.26.1.1.2

zxGponBWProfileFixed

The Fixed Bandwidth is entirely reserved and cyclically allocated in order
to achieve a low traffic transfer delay.The unit of kbps.It may be created
/read/written/modified. Guaranteed Bandwidth is the summation of Assu…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.1.1.3

zxGponBWProfileAssured

The Assured Bandwidth is bandwidth that is always available to the ONU/ONT if
the T-CONT buffer is expected to have traffic to transmit. If the T-CONT buffer
does not have traffic to transmit, this bandwidth may be use…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.1.1.4

zxGponBWProfileMaximum

The Maximum Bandwidth.The unit of kbps.It may be created/read/written/modified.
Writing or modifing can be done when the entry SHOULD NOT be used by any other entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.1.1.5

zxGponBWProfileType

Type 1 is characterized by Fixed bandwidth only;
Type 2 is characterized by Assured bandwidth only;
Type 3 has Assured bandwidth and Non-assured bandwidth;
Type 4 has Best-effort bandwidth only and does not have any Gua…

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.26.1.1.6

zxGponBWProfileRefCnt

Indicate the reference count of this BW profile.

zxGponBWProfileEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.1.1.7

The control that allows creation and deletion of entries. Deleting can be done
when the entry SHOULD NOT be used by any other entry.

zxGponTrafficProfileIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.26.1.1.8

zxGponTrafficProfileTable

table

.1.3.6.1.4.1.3902.1012.3.26.2 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponTrafficProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponTrafficProfileTable'

Rate configuration for one traffic.
As following:
sustainable information rate      ab. SIR
peak information rate             ab. PIR

zxGponTrafficProfileEntry row .1.3.6.1.4.1.3902.1012.3.26.2.1

An entry in the Traffic profile table.

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry
in the line card, from 1 to M, M is equal to 512.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.2.1.1

zxGponTrafficProfileName

The Traffic Profile Name.It may be created/read/written/modified.
Writing or modifing can be done all the time.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.26.2.1.2

zxGponTrafficProfileSir

The SIR is sustainable rate of the traffic. Writing or modifing can be done when the
entry SHOULD NOT be used by any other entry.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.2.1.3

zxGponTrafficProfilePir

The PIR is peak rate of the traffic. Writing or modifing can be done when the
entry SHOULD NOT be used by any other entry.

zxGponTrafficProfileRefCnt

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.2.1.4

The reference count of this profile.

zxGponTrafficProfileEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.2.1.5

The control that allows creation and deletion of entries. Deleting can be done
when the entry SHOULD NOT be used by any other entry.

zxGponThresholdDataProfileIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.26.2.1.6

zxGponThresholdDataProfileTable

table

.1.3.6.1.4.1.3902.1012.3.26.3 · 1 row entry · 18 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponThresholdDataProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponThresholdDataProfileTable'

It represents threshold values for the performance monitoring parameters.

zxGponThresholdDataProfileEntry row .1.3.6.1.4.1.3902.1012.3.26.3.1

It provide a Threshold Data pointer.

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry in the Threshold Data,
from 1 to M, M is equal to 128.

zxGponThresholdDataProfileName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.3.1.1

The Threshold Data Templet Name.It may be created/read/written/modified.
Writing or modifing can be done all the time.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.26.3.1.2

zxGponThresholdDataProfileVal1

zxGponThresholdDataProfileVal2

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.3

zxGponThresholdDataProfileVal3

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.4

It provides the associated threshold value for the 3rd thresholded counter in the
History Data type managed entity. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be u…

zxGponThresholdDataProfileVal4

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.5

zxGponThresholdDataProfileVal5

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.6

zxGponThresholdDataProfileVal6

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.7

zxGponThresholdDataProfileVal7

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.8

zxGponThresholdDataProfileVal8

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.9

zxGponThresholdDataProfileVal9

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.10

zxGponThresholdDataProfileVal10

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.11

zxGponThresholdDataProfileVal11

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.12

zxGponThresholdDataProfileVal12

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.13

zxGponThresholdDataProfileVal13

Enumerated Values:

0	none
1	sp
2	wrr

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.14

zxGponThresholdDataProfileVal14

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.15

zxGponThresholdDataProfileRefCnt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.26.3.1.16

The reference count of this profile.

zxGponThresholdDataProfileEntryStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.26.3.1.17

The control that allows creation and deletion of entries. Deleting can be done
when the entry SHOULD NOT be used by any other entry.

zxGponPortIdEncryptEnable

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.26.3.1.18

zxGponOnuEncryptTable

table

.1.3.6.1.4.1.3902.1012.3.27.3 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOnuEncryptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOnuEncryptTable'

zxGponOnuEncryptEntry row .1.3.6.1.4.1.3902.1012.3.27.3.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOnuEncryptDir	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.27.3.1.1`
zxGponOnuEncryptEnable	Enumerationr/w Constraints: `range: 0-64`	`.1.3.6.1.4.1.3902.1012.3.27.3.1.2`
zxGponOnuEncryptMode	Enumerationr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.3902.1012.3.27.3.1.3`

zxGponPortIdEncryptTable

table

.1.3.6.1.4.1.3902.1012.3.27.4 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponPortIdEncryptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponPortIdEncryptTable'

zxGponPortIdEncryptEntry row .1.3.6.1.4.1.3902.1012.3.27.4.1

Indexes

No indexes recorded

Column Syntax OID

Constraints:
range: 8-8

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.4.1.1

zxGponOnuAlarmStatusTable

table

.1.3.6.1.4.1.3902.1012.3.27.6 · 1 row entry · 28 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOnuAlarmStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOnuAlarmStatusTable'

zxGponOnuAlarmStatusEntry row .1.3.6.1.4.1.3902.1012.3.27.6.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOnuAlarmLOSd

Enumerated Values:

1	deactive
2	omciready

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.1

zxGponOnuAlarmLOSdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.2

zxGponOnuAlarmLOFd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.3

zxGponOnuAlarmLOFdMask

Enumerated Values:

1	regModeSn
2	regModePw
3	regModeSnPlusPw
4	regModeId

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.4

zxGponOnuAlarmSFd

Constraints:
range: 64-64

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.5

zxGponOnuAlarmSFdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.6

zxGponOnuAlarmSDd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.7

zxGponOnuAlarmSDdMask

Enumerated Values:

1	enable
2	disable

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.8

zxGponOnuAlarmLCDAd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.9

zxGponOnuAlarmLCDAdMask

Enumerated Values:

0	unknown
1	o1-initial
2	o2-standby
3	o3-powersetup
4	o4-serialnumber
5	o5-ranging
6	o6-operation
7	o7-popup

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.10

zxGponOnuAlarmLCDGd

Enumerated Values:

0	logging
1	los
2	syncMib
3	working
4	dyinggasp
5	authFailed
6	offline

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.11

zxGponOnuAlarmLCDGdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.12

zxGponOnuAlarmTFd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.13

zxGponOnuAlarmTFdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.14

zxGponOnuAlarmSUFd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.15

zxGponOnuAlarmSUFdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.16

zxGponOnuAlarmMEMd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.17

zxGponOnuAlarmMEMdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.18

zxGponOnuAlarmDACTd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.19

zxGponOnuAlarmDACTdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.20

zxGponOnuAlarmDISd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.21

zxGponOnuAlarmDISdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.22

zxGponOnuAlarmMISd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.23

zxGponOnuAlarmMISdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.24

zxGponOnuAlarmPEEd

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.25

zxGponOnuAlarmPEEdMask

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.26

zxGponOnuAlarmRDId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.27

zxGponOnuAlarmRDIdMask

zxGponOntDevMgmtDescription

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.27.6.1.28

zxGponSignalThresholdTable

table

.1.3.6.1.4.1.3902.1012.3.27.7 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponSignalThresholdTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponSignalThresholdTable'

zxGponSignalThresholdEntry row .1.3.6.1.4.1.3902.1012.3.27.7.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponSignalThresholdSDd	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.7.1.1`
zxGponSignalThresholdSFd	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.7.1.2`

zxGponOnuPerfStatisticTable

table

.1.3.6.1.4.1.3902.1012.3.27.8 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOnuPerfStatisticTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOnuPerfStatisticTable'

zxGponOnuPerfStatisticEntry row .1.3.6.1.4.1.3902.1012.3.27.8.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOnuPerfStatERRdCounter	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.3902.1012.3.27.8.1.1`
zxGponOnuPerfStatBIPErrCounter	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.3902.1012.3.27.8.1.2`

zxGponOnuWeightTable

table

.1.3.6.1.4.1.3902.1012.3.27.9 · 1 row entry · 6 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOnuWeightTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOnuWeightTable'

This table represents ONU side  configuration.

zxGponOnuWeightEntry row .1.3.6.1.4.1.3902.1012.3.27.9.1

It is entry in the table zxGponOnuWeightTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOnuSchedulemode COS Schedule mode.	Enumerationr/w	`.1.3.6.1.4.1.3902.1012.3.27.9.1.1`
zxGponOnuCos1Weight Weight of COS1(0-100).	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.9.1.2`
zxGponOnuCos2Weight Weight of COS2(0-100).	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.9.1.3`
zxGponOnuCos3Weight Weight of COS3(0-100).	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.9.1.4`
zxGponOnuCos4Weight Weight of COS4(0-100).	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.9.1.5`
zxGponOnuDownTrafficPtr The ONU downstream traffic descriptor profile.	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.27.9.1.6`

zxGponOntDevMgmtTable

table

.1.3.6.1.4.1.3902.1012.3.28.1 · 1 row entry · 12 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntDevMgmtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntDevMgmtTable'

zxGponOntDevMgmtEntry row .1.3.6.1.4.1.3902.1012.3.28.1.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOntDevMgmtTypeName

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.1

zxGponOntDevMgmtName

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.2

The definition size of description does not include the termination.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.3

zxGponOntDevMgmtRegisterId

Reserved. use in the future.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.4

zxGponOntDevMgmtProvisionSn

SN configed by Olt for the purpose of register

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.5

zxGponOntDevMgmtPwMode

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.6

zxGponOntDevMgmtPassword

password configed by Olt for the purpose of register

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.7

zxGponOntTargetState

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.8

zxGponOntDevMgmtEntryStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.28.1.1.9

zxGponOntIsAutoUpdate

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.28.1.1.10

zxGponOntRegMode

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.11

zxGponOntRegId

ID configed by Olt for the purpose of register

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.28.1.1.12

zxGponOntStateTable

table

.1.3.6.1.4.1.3902.1012.3.28.2 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntStateTable'

zxGponOntStateEntry row .1.3.6.1.4.1.3902.1012.3.28.2.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOntAdminState

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.28.2.1.1

zxGponOntOmccState

zxGponMgmtPonOltId zxGponMgmtPonOnuId zxOnuTrafficMgmtUnitTcontIdx

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.28.2.1.2

zxGponOntO1O7State

Unknown(DyingGasp),
Initial-state(O1),
Standby-state(O2),
Power-Setup-state(O3),
Serial-Number-state(O4),
Ranging-state(O5),
Operation-state(O6),
POPUP-state(O7)

Enumeration

.1.3.6.1.4.1.3902.1012.3.28.2.1.3

zxGponOntPhaseState

Enumeration

.1.3.6.1.4.1.3902.1012.3.28.2.1.4

zxGponOntDevInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.3 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntDevInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntDevInfoTable'

zxGponOntDevInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.3.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOntDevInfoSupportTcontNum	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.1`
zxGponOntDevInfoCurUsedTcontNum	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.2`
zxGponOntDevInfoSupportPortIdNum Reserved. used in the future.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.3`
zxGponOntDevInfoCurUsedPortIdNum	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.4`
zxGponOntDevInfoPqNum	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.5`
zxGponOntDevInfoTsNum	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.6`
zxGponOntDevInfoServiceType Reserved. used in the future.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.7`
zxGponOntDevInfoRealOnuId	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.3.1.8`

zxGponOntUniPortInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.4 · 1 row entry · 11 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntUniPortInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntUniPortInfoTable'

zxGponOntUniPortInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.4.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOntUniPortInfoTotalUniPorts It is total UNI ports number in the ONT/ONU.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.1`
zxGponOntUniPortInfoE1Ports It is total those UNI ports number, that it is E1.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.2`
zxGponOntUniPortInfoT1Ports It is total those UNI ports number, that it is T1.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.3`
zxGponOntUniPortInfoSTMPorts It is total those UNI ports number, that it is STM-1/STM-4 and so on.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.4`
zxGponOntUniPortInfoPOTSPorts It is total those UNI ports number, that it is used telephone, such as n * 64K, or VOIP.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.5`
zxGponOntUniPortInfoEthPorts It is total those UNI ports number, that it is used ethernet, such as FE/GE.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.6`
zxGponOntUniPortInfoRFPorts It is total those UNI ports number, that it is used Radio Freqency(RF).	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.7`
zxGponOntUniPortInfoMoCAPorts It is total those UNI ports number, that it is used MoCA.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.8`
zxGponOntUniPortInfoWiFiPorts It is total those UNI ports number, that it is used WiFI.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.9`
zxGponOntUniPortInfoAdslPorts It is total those UNI ports number, that it is used ADSL.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.10`
zxGponOntUniPortInfoVdslPorts It is total those UNI ports number, that it is used VDSL.	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.4.1.11`

zxGponOntPmStatisInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.5 · 1 row entry · 18 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntPmStatisInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntPmStatisInfoTable'

zxGponOntPmStatisInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.5.1

Indexes

Column Syntax OID

zxGponOntPmStatisInfoGemPacketTxLo

zxGponOntPmStatisInfoGemPacketRxCorIdleLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.1

zxGponOntPmStatisInfoGemPacketRxCorNoIdleLo

Constraints:
range: 0-64

.1.3.6.1.4.1.3902.1012.3.28.5.1.2

zxGponOntPmStatisInfoGemPacketRxErrLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.3

zxGponOntPmStatisInfoGemPayloadBytesRxLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.4

zxGponOntPmStatisInfoEthPacketTxLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.5

zxGponOntPmStatisInfoEthPacketRxCorLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.6

Reserved. used in the future.

zxGponOntPmStatisInfoEthPacketRxErrLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.7

zxGponOntPmStatisInfoOmciPacketTxLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.8

zxGponOntPmStatisInfoOmciPacketRxLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.9

zxGponOntPmStatisInfoOmciPacketRxCorLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.10

zxGponOntPmStatisInfoOmciPacketRxErrLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.11

zxGponOntPmStatisInfoPloamTxLo

Constraints:
range: 0-64

.1.3.6.1.4.1.3902.1012.3.28.5.1.12

zxGponOntPmStatisInfoPloamRxCorLo

Enumerated Values:

1	unicast
2	multicast

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.13

zxGponOntPmStatisInfoPloamRxErrLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.14

zxGponOntPmStatisInfoBipErrorRxLo

Enumerated Values:

1	up
2	down
3	bidirection

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.15

zxGponOntPmStatisInfoERRLo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.16

zxGponOntPmStatisInfoREILo

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.17

zxGponOntPmStatisInfoCorrectNonIdleGemFramesUpstream

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.28.5.1.18

zxGponOntPmStatisRealtimeInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.6 · 1 row entry · 13 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntPmStatisRealtimeInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntPmStatisRealtimeInfoTable'

zxGponOntPmStatisRealtimeInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.6.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOntPmStatisInfoCorrectIdleGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.1

zxGponOntPmStatisInfoErroredGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.2

zxGponOntPmStatisInfoGemPayloadBytesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.3

zxGponOntPmStatisInfoCorrectEthernetFramesUpstream

Enumerated Values:

1	uni2ani
2	ani2uni
3	bidirectional

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.4

zxGponOntPmStatisInfoErroredEthernetFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.5

zxGponOntPmStatisInfoTotalOmciFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.6

zxGponOntPmStatisInfoERRi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.7

zxGponOntPmStatisInfoREIi

Enumerated Values:

1	ces
2	bridge
6	mapper

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.8

zxGponOntPmStatisInfoUnreceivedBurstsUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.9

zxGponOntPmStatisInfoBipErrorUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.10

zxGponOntPmStatisInfoCorrectedBitsUpstream

Enumerated Values:

1	enabled
2	disabled

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.6.1.11

zxGponOntPmStatisInfoNotCorrectedWordsUpstream

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1012.3.28.6.1.12

zxGponOntPmStatisHistoryInfoCorrectNonIdleGemFramesUpstream

Constraints:
range: 0-65535

.1.3.6.1.4.1.3902.1012.3.28.6.1.13

zxGponOntPmStatisHistoryInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.7 · 1 row entry · 13 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntPmStatisHistoryInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntPmStatisHistoryInfoTable'

zxGponOntPmStatisHistoryInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.7.1

Indexes

No indexes recorded

Column Syntax OID

zxGponOntPmStatisHistoryInfoCorrectIdleGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.1

zxGponOntPmStatisHistoryInfoErroredGemFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.2

zxGponOntPmStatisHistoryInfoGemPayloadBytesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.3

zxGponOntPmStatisHistoryInfoCorrectEthernetFramesUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.4

zxGponOntPmStatisHistoryInfoErroredEthernetFramesUpstream

Enumerated Values:

2	atm
3	pri8021p
5	gemiw

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.5

zxGponOntPmStatisHistoryInfoTotalOmciFramesUpstream

Constraints:
range: 0-255

.1.3.6.1.4.1.3902.1012.3.28.7.1.6

zxGponOntPmStatisHistoryInfoERRi

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.1012.3.28.7.1.7

zxGponOntPmStatisHistoryInfoREIi

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.8

zxGponOntPmStatisHistoryInfoUnreceivedBurstsUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.9

zxGponOntPmStatisHistoryInfoBipErrorUpstream

Enumerated Values:

1	forward
2	discarded

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.10

zxGponOntPmStatisHistoryInfoCorrectedBitsUpstream

Enumerated Values:

1	nmsCreate
2	neCreate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.11

zxGponOntPmStatisHistoryInfoNotCorrectedWordsUpstream

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.12

zxOnuTrafficMgmtUnitTcontIdx

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3902.1012.3.28.7.1.13

zxGponOntLoopbackTestInfoTable

table

.1.3.6.1.4.1.3902.1012.3.28.8 · 1 row entry · 1 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponOntLoopbackTestInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponOntLoopbackTestInfoTable'

zxGponOntLoopbackTestInfoEntry row .1.3.6.1.4.1.3902.1012.3.28.8.1

Indexes

No indexes recorded

Column	Syntax	OID
zxGponOntLoopbackTestStart 1:start loopback test 2:stop loopback test	Integer32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.3902.1012.3.28.8.1.1`

zxOnuTrafficMgmtUnitTable

table

.1.3.6.1.4.1.3902.1012.3.30.1 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxOnuTrafficMgmtUnitTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxOnuTrafficMgmtUnitTable'

This table represents ONU's traffic management unit information including T-CONT and
user bandwidth management unit.

zxOnuTrafficMgmtUnitEntry row .1.3.6.1.4.1.3902.1012.3.30.1.1

It is entry in the zxOnuTrafficMgmtUnitTable.

Indexes

No indexes recorded

Column Syntax OID

An arbitrary(unique) integer for identifiying an entry
in the table, from 1 to N.

zxOnuTrafficMgmtUnitTcontUpBWIdxPtr

Constraints:
range: 1-65535

.1.3.6.1.4.1.3902.1012.3.30.1.1.1

zxOnuTrafficMgmtUnitName

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.30.1.1.2

This attribute is the index of templet used by T-CONT BW configuration.

zxOnuTrafficMgmtUnitAllocId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.1.1.3

This attribute is the allocid of tcont,value range is [256..4095].

zxOnuTrafficMgmtUnitUsedPortIdNum

Enumerated Values:

1	forward
2	discarded

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.1.1.4

The number of portId using this BW management unit.

zxOnuTrafficMgmtUnitUsedFlowNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.1.1.5

The number of flow using this BW management unit.

zxOnuTrafficMgmtUnitUsedCos

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.1.1.6

The integer in binary mode indicates the used COS(0-3).

zxOnuTrafficMgmtUnitEntryStatus

Enumerated Values:

1	dscpTo8021p
2	tagFrmToVal

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.1.1.7

This entry can be create modified and delete.

Constraints:
range: 24-24

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.30.1.1.8

zxGponGemPortTable

table

.1.3.6.1.4.1.3902.1012.3.30.2 · 1 row entry · 11 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortTable'

This table represents ONU side  configuration.

zxGponGemPortEntry row .1.3.6.1.4.1.3902.1012.3.30.2.1

It is entry in the table zxGponGemPortTable.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemPortIdx

An arbitrary(unique) integer for identifiying an entry
in the table. It is the virtual portid index

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.2.1.1

zxGponGemPortName

This attribute specifies the name of the GEM port.

OctetStringr/w

.1.3.6.1.4.1.3902.1012.3.30.2.1.2

zxGponGemPortType

This attribute specifies the type of the GEM port. Only 'unicast' is supported at present.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.2.1.3

zxGponGemPortTcontIdx

It is equal to the 'zxOnuTrafficMgmtUnitTcontIdx' of 'zxOnuTrafficMgmtUnitTable'.

zxGponGemPortUpTrafficPtr

Constraints:
range: 12-12

.1.3.6.1.4.1.3902.1012.3.30.2.1.4

zxGponGemPortDirection

This attribute specifies the type of the direction of GEM port. Default value is 'bidirection'.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.2.1.5

The GEM PORT upstream traffic descriptor profile.

zxGponGemPortDownTrafficPtr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.2.1.6

The GEM PORT downstream traffic descriptor profile.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.2.1.7

zxGponGemPortPortId

portid of gemport([65..1023]).

zxGponGemPortDefaultCosType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.2.1.8

The default COS.

Enumerationr/w

Enumerated Values:

1	lan
2	atm

.1.3.6.1.4.1.3902.1012.3.30.2.1.9

zxGponGemPortEntryStatus

This entry can be create modified and delete.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.30.2.1.10

zxGponGemPortUpQueue

The GEM PORT up queue,value scope for 0 to 7 and default is 0.

zxGponGemBasicPNCTPInfoDirection

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.2.1.11

zxGponGemPortBasicTable

table

.1.3.6.1.4.1.3902.1012.3.30.5 · 1 row entry · 12 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortBasicTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortBasicTable'

This table represents basic information of GEM Port, mainly CTP and IWTP which are the same 
regardless of connection of type.

zxGponGemPortBasicEntry row .1.3.6.1.4.1.3902.1012.3.30.5.1

It is entry in the table zxGponGemPortBasicTable.

Indexes

No indexes recorded

Column Syntax OID

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.3902.1012.3.30.5.1.1

zxGponGemBasicPNCTPInfoPriorityUpstreamID

zxGponGemBasicPNCTPInfoPriorityDownstreamID

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.5.1.2

zxGponGemBasicPNCTPInfoUniCounter

Enumerated Values:

1	atmvc
2	llc

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.5.1.3

zxGponGemBasicIWTPInfoIwOption

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.5.1.4

It identifies the type of non-GEM function that is being interworked; the option
can be CES (1) or MAC Bridge LAN (2) or 802.1p Mapper (6).

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.5.1.5

zxGponGemBasicIWTPInfoServiceProPtr

zxGponGemBasicIWTPInfoPPTPCounter

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.5.1.6

This attribute represents the number of instances of PPTP managed entities
associated with this instance of the GEM Interworking Termination Point
managed entity.

zxGponGemBasicIWTPInfoOpState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.5.1.7

This attribute indicates whether or not this managed entity is capable of
performing its task. The operational state reflects the perceived ability to
receive or to generate a valid signal. This value is set to enable…

Enumeration

Enumerated Values:

1	lan
2	atm

.1.3.6.1.4.1.3902.1012.3.30.5.1.8

zxGponBasicGALTDMProfileInfoFrameLossIntPeriod

I.e GEM Frame Loss Integration Period, It represents the duration in milliseconds
of the GEM frame loss integration period. If the GEM frame loss persists for such
a period, the GEM Interworking Termination Point manage…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.30.5.1.9

zxGponBasicGALEthProfileInfoMaxPayloadSize

I.e Maximum GEM Payload Size, it represents a maximum payload size that is generated
in the associated GEM Interworking Termination Point managed entity. It is modified,
when the OLT or ONU is restarted , this value wil…

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.30.5.1.10

zxGponGemBasicMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.5.1.11

zxGponGemBasicEntryStatus

This attribute can be create,modify and delete.

zxGponMACBriPortCfgDataIWTPMeIdIdx

Enumerated Values:

1	activate
2	deactivate

Description:

.1.3.6.1.4.1.3902.1012.3.30.5.1.12

zxGponGemPortMACBridgeIWTPTable

table

.1.3.6.1.4.1.3902.1012.3.30.6 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortMACBridgeIWTPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortMACBridgeIWTPTable'

This table represents MAC Bridge lan Information.

zxGponGemPortMACBridgeIWTPEntry row .1.3.6.1.4.1.3902.1012.3.30.6.1

It is entry in the table zxGponGemPortMACBridgeTable.

Indexes

No indexes recorded

Column Syntax OID

This attribute provides a unique number for each instance of this managed entity.

zxGponMACBriPortCfgDataIWTPPortNum

Enumerated Values:

1	atmvc
2	llc

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.6.1.1

This attribute provides the port number.

zxGponMACBriPortCfgDataIWTPTPType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.6.1.2

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.6.1.3

zxGponMACBriPortCfgDataIWTPPortPriority

This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.30.6.1.4

zxGponMACBriPortCfgDataIWTPPortPathCost

This attribute provides the cost contribution of the port to the path cost towards
the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535).

Integer32r/w

Enumerated Values:

1	forward
2	filter

.1.3.6.1.4.1.3902.1012.3.30.6.1.5

zxGponMACBriPortCfgDataIWTPPortSpanTreeInd

This Boolean attribute indicates whether or not STP is enabled at this port.
The value TRUE means enabled.

zxGponMACBriPortCfgDataIWTPEncapMethod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.6.1.6

This attribute identifies the frame encapsulation method that is used. Value
0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous
instantiation, the value 0x00 is used.

zxGponMACBriPortCfgDataIWTPLANFCSInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.6.1.7

This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded
(value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous instantiation,
the value 0x00 is used.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.6.1.8

zxGponMACBriPortCfgDataIWTPMgmtCtrlFlag

This attribute is used to indicate this record is created by NMS or NE. If it
is neCreate(2), this record can not be deleted.

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.6.1.9

zxGponMACBriPortCfgDataIWTPEntryStatus

This attribute can be create,modify and delete.

zxGponMACBriPortCfgDataUNIMeIdIdx

Enumerated Values:

1	forward
2	filter

Description:

.1.3.6.1.4.1.3902.1012.3.30.6.1.10

zxGponGemPortMACBridgeUNITable

table

.1.3.6.1.4.1.3902.1012.3.30.7 · 1 row entry · 8 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortMACBridgeUNITable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortMACBridgeUNITable'

This table represents MAC Bridge lan Information.

zxGponGemPortMACBridgeUNIEntry row .1.3.6.1.4.1.3902.1012.3.30.7.1

It is entry in the table zxGponGemPortMACBridgeUNITable.

Indexes

No indexes recorded

Column Syntax OID

This attribute provides a unique number for each instance of this managed entity.

zxGponMACBriPortCfgDataUNIPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.7.1.1

This attribute provides the port number.

zxGponMACBriPortCfgDataUNITPType

Enumerated Values:

0	none
1	sp
2	wrr

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.7.1.2

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.7.1.3

zxGponMACBriPortCfgDataUNIPortPriority

This attribute denotes the priority of the port. The range is 0x00 to 0x00FF (0 to 255).

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.30.7.1.4

zxGponMACBriPortCfgDataUNIPortPathCost

This attribute provides the cost contribution of the port to the path cost towards
the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65 535).

Integer32r/w

.1.3.6.1.4.1.3902.1012.3.30.7.1.5

zxGponMACBriPortCfgDataUNIPortSpanTreeInd

This Boolean attribute indicates whether or not STP is enabled at this port.
The value TRUE means enabled.

zxGponMACBriPortCfgDataUNIEncapMethod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.7.1.6

This attribute identifies the frame encapsulation method that is used. Value
0x00: identification by ATM VC; value 0x01: LLC encapsulation. Upon autonomous
instantiation, the value 0x00 is used.

zxGponMACBriPortCfgDataUNILANFCSInd

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.7.1.7

This attribute indicates whether LAN FCS (Frame Check Sequence) bytes are forwarded
(value 0x01) or discarded (value 0x02) towards the OLT. Upon autonomous instantiation,
the value 0x00 is used.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.7.1.8

zxGponGemPort8021pTable

table

.1.3.6.1.4.1.3902.1012.3.30.8 · 1 row entry · 4 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPort8021pTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPort8021pTable'

This table represents 802.1p priority mapper Information.

zxGponGemPort8021pEntry row .1.3.6.1.4.1.3902.1012.3.30.8.1

It is entry in the table zxGponGemPort8021pTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponGemPort8021pMapperUntagFrmInd This attribute indicates how the ONT should handle Untagged Ethernet frames received across the associated Ethernet interface. Valid values include the following: 1: Convert from DSCP to 802.1p 2: Tag frame to a certai…	Enumerationr/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.3902.1012.3.30.8.1.1`
zxGponGemPort8021pMapperDscpTo8021pPri This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 1('zxGpon8021pMapperUntagFrmInd' is dscpTo8021p), this attribute structure can be considered a bitmap that rep…	OctetStringr/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.3902.1012.3.30.8.1.2`
zxGponGemPort8021pMapperDefaultPri This attribute is used in conjunction with the Unmarked Frame Option attribute. If unmarked frame option is 2('zxGpon8021pMapperUntagFrmInd' is tagFrmToVal), this attribute contains the default P-Bit priority setting t…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.3902.1012.3.30.8.1.3`
zxGponGemPort8021pMapperTPType This attribute identifies the type of termination point associated with the mapper. The value is set to 0x01 if the mapper is used for Bridging-mapping. The value is set to 0x02 if the mapper is directly associated wi…	Enumeration Constraints: `range: 0-7`	`.1.3.6.1.4.1.3902.1012.3.30.8.1.4`

zxGponGemPortStructuredCESTable

table

.1.3.6.1.4.1.3902.1012.3.30.9 · 1 row entry · 2 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortStructuredCESTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortStructuredCESTable'

This table represents Logical N X 64 kbit/s sub-port CTP Information.

zxGponGemPortStructuredCESEntry row .1.3.6.1.4.1.3902.1012.3.30.9.1

It is entry in the table zxGponGemPortCESTable.

Indexes

No indexes recorded

Column	Syntax	OID
zxGponLogicalSubportCTPMeIdIdx This attribute provides a unique number for each instance of this managed entity.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.3902.1012.3.30.9.1.1`
zxGponLogicalSubportCTPTimeSlots This attribute provides a bitmap, which indicates the time slots. Each bit indicates whether the corresponding time slot is included in the connection or not. The correspondence is as indicated in Table 8.	OctetString	`.1.3.6.1.4.1.3902.1012.3.30.9.1.2`

zxGponGemPortIpRouterIWTPTable

table

.1.3.6.1.4.1.3902.1012.3.30.10 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortIpRouterIWTPTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortIpRouterIWTPTable'

This table represents IP router Information.

zxGponGemPortIpRouterIWTPEntry row .1.3.6.1.4.1.3902.1012.3.30.10.1

It is entry in the table zxGponGemPortIpRouterIWTPTable.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemPortIpPortCfgDataIWTPMeIdIdx

This attribute provides a unique number for each instance of this managed entity.

zxGponGemPortIpPortCfgDataIWTPPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.10.1.1

This attribute identifies the port at which IP provisioning takes place.

zxGponGemPortIpPortCfgDataIWTPTPType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.10.1.2

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.10.1.3

zxGponGemPortIpPortCfgDataIWTPPortAddress

This attribute identifies the provisioned IP address.
When an IP address is not assigned, this attribute consists of all 0x00.

zxGponGemPortIpPortCfgDataIWTPPortMask

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.30.10.1.4

This attribute identifies the address mask associated with the provisioned IP address.
When an IP address mask is not assigned, this attribute consists of all 0x00.

zxGponGemPortIpPortCfgDataIWTPUnnumbered

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.30.10.1.5

This boolean attribute indicates whether or not this IP port has an IP address.
The value TRUE means unnumbered. (For future use by IP router function.).

zxGponGemPortIpPortCfgDataIWTPAdministrativeState

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.10.1.6

This boolean attribute is used to activate (unlock, value 0x00) and
deactivate (lock, value 0x01) the functions performed by instances of this managed entity.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.10.1.7

zxGponGemPortIpPortCfgDataIWTPPortState

This boolean attribute provides status information on the port.
Valid values include 'up' (value 0x00) and 'down' (value 0x01).

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.10.1.8

zxGponGemPortIpPortCfgDataIWTPAllowRemoteAccess

This boolean attribute indicates whether or not this IP port may be accessed remotely.
The value TRUE means remote access is enabled.

zxGponGemPortIpPortCfgDataIWTPEncapsulationMethod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.10.1.9

This attribute identifies the frame encapsulation method that is used.
Value 0x00: identification by ATM VC;
value 0x01: LLC encapsulation.
Upon autonomous instantiation, the value 0x00 is used.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.10.1.10

zxGponGemPortIpRouterUNITable

table

.1.3.6.1.4.1.3902.1012.3.30.11 · 1 row entry · 10 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortIpRouterUNITable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortIpRouterUNITable'

This table represents IP router Information.

zxGponGemPortIpRouterUNIEntry row .1.3.6.1.4.1.3902.1012.3.30.11.1

It is entry in the table zxGponGemPortIpRouterTable.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemPortIpPortCfgDataUNIMeIdIdx

This attribute provides a unique number for each instance of this managed entity.

zxGponGemPortIpPortCfgDataUNIPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.11.1.1

This attribute identifies the port at which IP provisioning takes place.

zxGponGemPortIpPortCfgDataUNITPType

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.3902.1012.3.30.11.1.2

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.11.1.3

zxGponGemPortIpPortCfgDataUNIPortAddress

This attribute identifies the provisioned IP address.
When an IP address is not assigned, this attribute consists of all 0x00.

zxGponGemPortIpPortCfgDataUNIPortMask

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.30.11.1.4

This attribute identifies the address mask associated with the provisioned IP address.
When an IP address mask is not assigned, this attribute consists of all 0x00.

zxGponGemPortIpPortCfgDataUNIUnnumbered

Type Constraints:
range: 4

.1.3.6.1.4.1.3902.1012.3.30.11.1.5

This boolean attribute indicates whether or not this IP port has an IP address.
The value TRUE means unnumbered. (For future use by IP router function.).

zxGponGemPortIpPortCfgDataUNIAdministrativeState

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.11.1.6

This boolean attribute is used to activate (unlock, value 0x00) and
deactivate (lock, value 0x01) the functions performed by instances of this managed entity.

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.11.1.7

zxGponGemPortIpPortCfgDataUNIPortState

This boolean attribute provides status information on the port.
Valid values include 'up' (value 0x00) and 'down' (value 0x01).

Enumeration

.1.3.6.1.4.1.3902.1012.3.30.11.1.8

zxGponGemPortIpPortCfgDataUNIAllowRemoteAccess

This boolean attribute indicates whether or not this IP port may be accessed remotely.
The value TRUE means remote access is enabled.

zxGponGemPortIpPortCfgDataUNIEncapsulationMethod

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.3902.1012.3.30.11.1.9

This attribute identifies the frame encapsulation method that is used.
Value 0x00: identification by ATM VC;
value 0x01: LLC encapsulation.
Upon autonomous instantiation, the value 0x00 is used.

Enumerationr/w

Enumerated Values:

0	gemportUpQueue

.1.3.6.1.4.1.3902.1012.3.30.11.1.10

zxGponGemPortIWTPMACBriPortFilterTableInfoTable

table

.1.3.6.1.4.1.3902.1012.3.30.12 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortIWTPMACBriPortFilterTableInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortIWTPMACBriPortFilterTableInfoTable'

zxGponGemPortIWTPMACBriPortFilterTableInfoEntry row .1.3.6.1.4.1.3902.1012.3.30.12.1

Alternative schemes for this managed entity may be included in future Recommendations.

Indexes

No indexes recorded

Column Syntax OID

zxGponGemPortIWTPMACBriPortFilterTableMacAddr

This attribute lists destination MAC Addresses associated with the bridge port.

zxGponGemPortIWTPMACBriPortFilterTableAction

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1012.3.30.12.1.1

Enumerationr/w

.1.3.6.1.4.1.3902.1012.3.30.12.1.2

zxGponGemPortIWTPMACBriPortFilterTableEntryStatus

zxGponGemPortUNIMACBriPortFilterTableMacAddr

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.3902.1012.3.30.12.1.3

zxGponGemPortUNIMACBriPortFilterTableInfoTable

table

.1.3.6.1.4.1.3902.1012.3.30.13 · 1 row entry · 3 columns

Open in standard view

Uses the zte variant from /opt/observium/mibs/zte.

Command help

Walk zxGponGemPortUNIMACBriPortFilterTableInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZXGPON-SERVICE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZXGPON-SERVICE-MIB::zxGponGemPortUNIMACBriPortFilterTableInfoTable'

zxGponGemPortUNIMACBriPortFilterTableInfoEntry row .1.3.6.1.4.1.3902.1012.3.30.13.1

Alternative schemes for this managed entity may be included in future Recommendations.

Indexes

No indexes recorded

Column Syntax OID

This attribute lists destination MAC Addresses associated with the bridge port.

zxGponGemPortUNIMACBriPortFilterTableAction

Enumerated Values:

1	toohigh
2	toolow

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.3902.1012.3.30.13.1.1

Enumerationr/w

Enumerated Values:

1	toohigh
2	toolow

.1.3.6.1.4.1.3902.1012.3.30.13.1.2

zxGponGemPortUNIMACBriPortFilterTableEntryStatus