zxGponPPTPEthInfoExpectedType
ZXGPON-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1012.3.23.8.1.1.3
Object
column
r/w
Integer32
Coding Contents Description
0 no LIM Default value
1 A1.5 ATM 1.544 Mbit/s module
2 A2 ATM 2.048 Mbit/s
3 A6.3 ATM 6.312 Mbit/s module
4 A6.3U ATM 6.312 Mbit/s module, Remote (U-interface)
5 A8 ATM 8.448 Mbit/s
6 A25 ATM 25.6 Mbit/s module
7 A34 ATM 34.368 Mbit/s module
8 A45 ATM 44.736 Mbit/s module
9 A45/34 Configurable ATM 44.736/34.368 Mbit/s module
10 A150SMF SDH ATM STM-1 SMF UNI
11 A150MMF SDH ATM STM-1 MMF UNI
12 A150UTP SDH ATM STM-1 UTP UNI
13 C1.5 (DS1) 1.544 Mbit/s Local (T-interface) AAL 1 module
14 C2.0 (E1) 2.048 Mbit/s Local (T-interface) AAL 1 module
15 C6.3 (J2) 6.312 Mbit/s Local (T-interface) AAL 1 module
16 C-DS1/E1 Configurable DS1/E1 AAL 1 module
17 C-DS1/E1/J1 Configurable DS1/E1/J1 AAL 1 module
18 C6.3U (J2) 6.312 Mbit/s Remote (U-interface) AAL 1 module
19 C192k 192 kbit/s Local (T-interface) AAL 1 module
20 C44.7 (DS3) 44.736 Mbit/s Local (T-interface) AAL 1 module
21 C34.3 (E3) 34.368 Mbit/s Local (T-interface) AAL 1 module
22 10Base-T 10 Base-T Ethernet LAN IF
23 100Base-T 100 Base-T Ethernet LAN IF
24 10/100Base-T 10/100 Base-T Ethernet LAN IF
25 Token Ring Token Ring LAN IF
26 FDDI FDDI LAN IF
27 FR Frame relay
28 C1.5 (J1) 1.544 Mbit/s Local (T-interface) AAL 1 module
29 A150SMF SONET ATM OC-3 SMF UNI
30 A150MMF SONET ATM OC-3 MMF UNI
31 A150UTP SONET ATM OC-3 UTP UNI
32 POTS Plain Old Telephony Service
33 ISDN-BRI ISDN Basic Rate Interface
34 Gigabit Ethernet Gigabit Ethernet IF
35 ADSL ADSL IF
36 SHDSL SHDSL IF
37 VDSL VDSL IF
38 Video Service Video module
39..251 Reserved
252 PON622symm Symmetric 622/622 Mbit/s PON IF
253 PON155 Symmetric 155/155 Mbit/s PON IF
254 PON622 Asymmetric 155/622 Mbit/s PON IF
255 Plug-and-play/Unknown Plug-and-play (for the Subscriber Line Cardholder managed entity only)
Unrecognized module (for the Subscriber Line Card managed entity only)
It may be 22,23,24,34 and so on. It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be used by any other entry.
Context
- MIB
- ZXGPON-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.23.8.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxGponPPTPEthUniInfoEntry
- Table
- zxGponPPTPEthUniInfoTable
- Siblings
- 15
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
1 | forward |
2 | filter |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponPPTPEthInfoTPID An arbitrary(unique) integer for identifiying an entry in the PPTP Ethernet
information Table. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.1 |
| zxGponPPTPEthInfoMaxFrameSize It denotes the maximum allowed frame size to be transmitted across this interface.
It may be created/read/written/modified.Writing or modifing can be done when the
entry SHOULD N… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.10 |
| zxGponPPTPEthInfoDTEorDCEInd It indicates whether the Ethernet interface wiring is DTE(2) or DCE(1). It may be
created/read/written/modified.Writing or modifing can be done when the entry SHOULD
NOT be used b… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.11 |
| zxGponPPTPEthInfoPauseTime It allows the ONT line card to request that the customer terminal temporarily suspend sending
data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times of the parti… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.12 |
| zxGponPPTPEthInfoBridgedorIPInd It indicates whether the Ethernet interface is bridged or derived from an IP router function
(Bridged: 1; IP router: 2; 3: depends on Subscriber Line Card.) 3 means that the SLC(S… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.13 |
| zxGponPPTPEthInfoARC It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting
allowed immediately and on means alarm reporting inhibited, until this ONT(managed e… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.14 |
| zxGponPPTPEthInfoARCInterval It provides a provisionable length of time. Units are given in minutes. It may
be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT
be used b… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.15 |
| zxGponPPTPEthInfoPppoeFilterEnable It may be used to control filtering of PPPoE packets on this Ethernet port. The disabled is
used to disable filtering. The enabled is used to enable filtering. When filtering is e… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.16 |
| zxGponPPTPEthInfoMeId This attribute provides a unique number for each instance of this managed entity.
This 2-byte number is directly associated with the physical position of the UNI.
The first byte… | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.2 |
| zxGponPPTPEthInfoSensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type'
equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00,
then the … | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.4 |
| zxGponPPTPEthInfoAutoDetectCfg For 10/100 Base-T Ethernet interfaces, this attribute is used to set the configuration options:
Auto-sensing: 0x00; 10Base-T: 0x01; 100Base-T: 0x02: Gigabit Ethernet: 0x03. | column | Integer32 | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.5 |
| zxGponPPTPEthInfoEthLoopback This attribute is used to set the Ethernet loopback configuration: No loopback
(value normal), Loop3 (value loop, Loopback of downstream traffic after PHY
transceiver). Loop 3 i… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.6 |
| zxGponPPTPEthInfoAdminState This attribute is used to activate (unlock: value enabled) and deactivate
(lock: value disabled) the functions performed by instances of this managed entity.
Selection of a defa… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.7 |
| zxGponPPTPEthInfoOperationalState This attribute indicates whether or not this managed entity is capable of performing
its task. The operational state reflects the perceived ability to receive or to
generate a v… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.8 |
| zxGponPPTPEthInfoDuplexSpeedInd For 10/100 Base-T Ethernet interfaces, it is used to set the configuration options:
Auto-sensing(incluing speed and duplex): 1; It comprises 'Auto detection configuration'
and 'Du… | column | Enumeration | .1.3.6.1.4.1.3902.1012.3.23.8.1.1.9 |