zxGponPPTPEthInfoDuplexSpeedInd

ZXGPON-SERVICE-MIB · .1.3.6.1.4.1.3902.1012.3.23.8.1.1.9

MIB view Table view

Object

column Enumeration

For 10/100 Base-T Ethernet interfaces, it is used to set the configuration options:
Auto-sensing(incluing speed and duplex): 1; It comprises 'Auto detection configuration'
and 'DuplexInd' in G.983.2.It may be created/read/written/modified.Writing or
modifing can be done when the entry SHOULD NOT be used by any other entry.

Context

MIB: ZXGPON-SERVICE-MIB
OID: .1.3.6.1.4.1.3902.1012.3.23.8.1.1.9
Type: column
Access: readonly
Status: current
Parent: zxGponPPTPEthUniInfoEntry
Table: zxGponPPTPEthUniInfoTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxGponPPTPEthInfoTPID An arbitrary(unique) integer for identifiying an entry in the PPTP Ethernet information Table.	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.1`
zxGponPPTPEthInfoMaxFrameSize It denotes the maximum allowed frame size to be transmitted across this interface. It may be created/read/written/modified.Writing or modifing can be done when the entry SHOULD N…	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.10`
zxGponPPTPEthInfoDTEorDCEInd It indicates whether the Ethernet interface wiring is DTE(2) or DCE(1). It may be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT be used b…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.11`
zxGponPPTPEthInfoPauseTime It allows the ONT line card to request that the customer terminal temporarily suspend sending data. Units are in 'pause_quanta' (1 pause_quantum equals 512 bits times of the parti…	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.12`
zxGponPPTPEthInfoBridgedorIPInd It indicates whether the Ethernet interface is bridged or derived from an IP router function (Bridged: 1; IP router: 2; 3: depends on Subscriber Line Card.) 3 means that the SLC(S…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.13`
zxGponPPTPEthInfoARC It is used to control alarm reporting from this ONT(managed entity). off means alarm reporting allowed immediately and on means alarm reporting inhibited, until this ONT(managed e…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.14`
zxGponPPTPEthInfoARCInterval It provides a provisionable length of time. Units are given in minutes. It may be created/read/written/modified.Writing or modifing can be done when the entry SHOULD NOT be used b…	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.15`
zxGponPPTPEthInfoPppoeFilterEnable It may be used to control filtering of PPPoE packets on this Ethernet port. The disabled is used to disable filtering. The enabled is used to enable filtering. When filtering is e…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.16`
zxGponPPTPEthInfoMeId This attribute provides a unique number for each instance of this managed entity. This 2-byte number is directly associated with the physical position of the UNI. The first byte…	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.2`
zxGponPPTPEthInfoExpectedType Coding Contents Description 0 no LIM Default value 1 A1.5 …	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.3`
zxGponPPTPEthInfoSensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then the …	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.4`
zxGponPPTPEthInfoAutoDetectCfg For 10/100 Base-T Ethernet interfaces, this attribute is used to set the configuration options: Auto-sensing: 0x00; 10Base-T: 0x01; 100Base-T: 0x02: Gigabit Ethernet: 0x03.	column	Integer32	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.5`
zxGponPPTPEthInfoEthLoopback This attribute is used to set the Ethernet loopback configuration: No loopback (value normal), Loop3 (value loop, Loopback of downstream traffic after PHY transceiver). Loop 3 i…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.6`
zxGponPPTPEthInfoAdminState This attribute is used to activate (unlock: value enabled) and deactivate (lock: value disabled) the functions performed by instances of this managed entity. Selection of a defa…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.7`
zxGponPPTPEthInfoOperationalState This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a v…	column	Enumeration	`.1.3.6.1.4.1.3902.1012.3.23.8.1.1.8`