zxGponOltPEEi
ZXGPON-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1012.3.45.131
Object
notification
PEEi is Physical Equipment Error of ONUi. Generate Loss_of_physical_layer_I notification.
Context
- MIB
- ZXGPON-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1012.3.45.131- Type
- notification
- Status
- current
- Parent
- zxGponTraps
- Siblings
- 92
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxGponTrapsBindVar | node | - | .1.3.6.1.4.1.3902.1012.3.45.1 |
| zxGponOltLOSi LOSi is Loss of signal for ONUi. Generate notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.101 |
| zxGponOltLosiRestore LOSi is Loss of signal for ONUi.When the OLT receives
a valid optical signal from ONUi, Alarm is restored | notification | - | .1.3.6.1.4.1.3902.1012.3.45.102 |
| zxGponOltLOFi LOFi is Loss of Frame of ONUi. Send 3 times
Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.103 |
| zxGponOltLOFiRestore LOFi is Loss of Frame of ONUi. When frame delineation
for ONUi is achieved in the operating state. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.104 |
| zxGponOltDOWi DOWi is Drift of Window of ONUi. Send modified EqD to the ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.105 |
| zxGponOltDOWiRestore DOWi is Drift of Window of ONUi. When the OLT
receives the ONUi Transmission in the correct position. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.106 |
| zxGponOltSFi SFi is Signal Fail of ONUi. Send 3 times
Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.107 |
| zxGponOltSFiRestore SFi is Signal Fail of ONUi.When the upstream
BER of ONUi becomes <10?y+1, this state is cleared. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.108 |
| zxGponOltSDi SDi is Signal Degraded of ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.109 |
| zxGponOltSDiRestore SDi is Signal Degraded of ONUi. When the upstream
BER of ONUi becomes <10?X+1, this state is cleared. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.110 |
| zxGponOltLCDAi LCDAi is Loss of ATM channel delineation.
Send 3 times Deactivate_ONU-ID messages Generate
Loss_of_phy_layer_I notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.111 |
| zxGponOltLCDAiRestore LCDAi is Loss of ATM channel delineation. When
cell delineation for ONUi is achieved. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.112 |
| zxGponOltLCDGi LCDGi is Loss of GEM channel delineation.
Send 3 times Deactivate_ONU-ID messages Generate
Loss_of_phy_layer_I notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.113 |
| zxGponOltLCDGiRestore LCDGi is Loss of GEM channel delineation. When
GEM channel delineation for ONUi is achieved. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.114 |
| zxGponOltRDIi RDIi is Remote Defect Indication of ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.115 |
| zxGponOltRDIiRestore RDIi is Remote Defect Indication of ONUi. When the RDI field of
ONUi is de-asserted. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.116 |
| zxGponOltSUFi SUFi is Start-up Failure of ONUi. Send 3 times Deactivate_ONU-ID messages. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.117 |
| zxGponOltSUFiRestore SUFi is Start-up Failure of ONUi. The ONU is ranged successfully. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.118 |
| zxGponOltDFi DFi is Deactivate Failure of ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.119 |
| zxGponOltDFiRestore DFi is Deactivate Failure of ONUi. Cancelled by the operator. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.120 |
| zxGponOltLOAi LOAi is Loss of Acknowledge with ONUi. Send 3 times
Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.121 |
| zxGponOltLOAiRestore LOAi is Loss of Acknowledge with ONUi. When the OLT
receives an acknowledgement from the ONU. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.122 |
| zxGponOltDGi DGi is Receive Dying-Gasp of ONUi. Ignore received
alarms from this ONU. Generate Loss_of_phy_layer_I
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.123 |
| zxGponOltDGiRestore DGi is Receive Dying-Gasp of ONUi. When the OLT receives
a PLOAM message during ranging process. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.124 |
| zxGponOltLOAMi LOAMi is Loss of PLOAM for ONUi. Send 3 times
Deactivate_ONU-ID messages. Generate Loss_of_phy_layer_I
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.125 |
| zxGponOltLOAMiRestore LOAMi is Loss of PLOAM for ONUi. When the OLT receives
a PLOAM message corresponding to its PLOAM flag in the
Operating state. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.126 |
| zxGponOltMEMi MEMi is Message_Error Message from ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.127 |
| zxGponOltMEMiRestore MEMi is Message_Error Message from ONUi. When
the operator is informed. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.128 |
| zxGponOltMISi Misi is Link Mismatch of ONUi. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.129 |
| zxGponOltMISiRestore MISi is Link Mismatch of ONUi. The OLT detects
that received PSTi and the transmitted PST are the same. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.130 |
| zxGponOltPEEiRestore PEEi is Physical Equipment Error of ONUi. When
the OLT doesn't receive a PEE message from the ONUi in 3 s. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.132 |
| zxGponOntLOS LOS is Loss Of Signal. Switch off laser. Generate
Loss_of_phy_layer notification. Move to Initial- State. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.133 |
| zxGponOntLOSRestore LOS is Loss Of Signal. Valid optical signal. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.134 |
| zxGponOntLOF LOF is Loss of Frame. Switch off laser. Generate
Loss_of_phy_layer notification. Move to Initial- State. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.135 |
| zxGponOntLOFRestore LOF is Loss of Frame. When 2 consecutive frames
have correct PSYNC. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.136 |
| zxGponOntTF TF is Transmitter Failure. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.137 |
| zxGponOntTFRestore TF is Transmitter Failure. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.138 |
| zxGponOntSF SF is Signal Failed. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.139 |
| zxGponOntSFRestore SF is Signal Failed. Set inactive when
the downstream BER is <10?(y+1). | notification | - | .1.3.6.1.4.1.3902.1012.3.45.140 |
| zxGponOntSD SD is Signal Degraded. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.141 |
| zxGponOntSDRestore SD is Signal Degraded. Set inactive
when the downstream BER is <10?(x+1). | notification | - | .1.3.6.1.4.1.3902.1012.3.45.142 |
| zxGponOntLCDA LCDA is Loss of ATM channel delineation.
Switch off laser. Generate Loss_of_phy_layer
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.143 |
| zxGponOntLCDARestore LCDA is Loss of ATM channel delineation.
When cell delineation is achieved. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.144 |
| zxGponOntLCDG LCDG is Loss of GEM channel delineation.
Switch off laser. Generate Loss_of_phy_layer
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.145 |
| zxGponOntLCDGRestore LCDG is Loss of GEM channel delineation.
When GEM delineation is achieved. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.146 |
| zxGponOntRDI RDI is Remote Defect Indication in ONU. Set RDI status bit in PLOu. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.147 |
| zxGponOntRDIRestore RDI is Remote Defect Indication in ONU. When the OLT transmission defect is resolved. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.148 |
| zxGponOntSUF SUF is Start-up Failure. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.149 |
| zxGponOntSUFRestore SUF is Start-up Failure. When ranging is successful. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.150 |
| zxGponOntMEM MEM is Message Error Message. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.151 |
| zxGponOntMEMRestore MEM is Message Error Message. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.152 |
| zxGponOntDACT DACT is Deactivate ONU-ID. Switch off the
laser and go to Standby-State. Generate
Loss_of_phy_layer notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.153 |
| zxGponOntDACTRestore DACT is Deactivate ONU-ID.Reception of Upstream_overhead message. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.154 |
| zxGponOntDIS DIS is Disabled ONU. Switch off laser. Go to
Emergency-Stop State Generate Loss_of_phy_layer
notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.155 |
| zxGponOntDISRestore DIS is Disabled ONU. When the ONU receives a Disable_Serial_Number
message with Enable flag=0x0F or when it receives a Disable_Serial_Number
message with it's own serial number a… | notification | - | .1.3.6.1.4.1.3902.1012.3.45.156 |
| zxGponOntMIS MIS is Link Mismatching. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.157 |
| zxGponOntMISRestore MIS is Link Mismatching. The ONU detects that the received
PST and transmitted PST are the same. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.158 |
| zxGponOntPee Pee is Physical Equipment Error. Generate Loss_of_physical_layer notification. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.159 |
| zxGponOntPeeRestore Pee is Physical Equipment Error. When the ONU doesn't receive a PEE message in 3 s. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.160 |
| zxGponOltLOS LOS is Loss Of Signal. Switch off laser. Generate
Loss_of_phy_layer notification. Move to Initial- State. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.161 |
| zxGponOltLOSRestore LOS is Loss Of Signal. Valid optical signal. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.162 |
| zxGponOltLOF LOF is Loss of Frame. Switch off laser. Generate
Loss_of_phy_layer notification. Move to Initial- State. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.163 |
| zxGponOltLOFRestore LOF is Loss of Frame. When 2 consecutive frames | notification | - | .1.3.6.1.4.1.3902.1012.3.45.164 |
| zxGponOntRegister | notification | - | .1.3.6.1.4.1.3902.1012.3.45.165 |
| zxGponOntUnregister | notification | - | .1.3.6.1.4.1.3902.1012.3.45.166 |
| zxGponOntAuthPass | notification | - | .1.3.6.1.4.1.3902.1012.3.45.167 |
| zxGponOntAuthFailed | notification | - | .1.3.6.1.4.1.3902.1012.3.45.168 |
| zxPonFanOffLine | notification | - | .1.3.6.1.4.1.3902.1012.3.45.171 |
| zxPonFanOffLineRestore | notification | - | .1.3.6.1.4.1.3902.1012.3.45.172 |
| zxGponLinkOntDyingGasp | notification | - | .1.3.6.1.4.1.3902.1012.3.45.173 |
| zxGponLinkOntDyingGaspRestore | notification | - | .1.3.6.1.4.1.3902.1012.3.45.174 |
| zxGponOltRxPowerAlarmi | notification | - | .1.3.6.1.4.1.3902.1012.3.45.175 |
| zxGponOltRxPowerAlarmiRestore | notification | - | .1.3.6.1.4.1.3902.1012.3.45.176 |
| zxGponOltRxPowerAbnormalInformi | notification | - | .1.3.6.1.4.1.3902.1012.3.45.177 |
| zxGponOltRxPowerNormalInformi | notification | - | .1.3.6.1.4.1.3902.1012.3.45.178 |
| zxGponOltTxPowerAlarm | notification | - | .1.3.6.1.4.1.3902.1012.3.45.179 |
| zxGponOltTxPowerAlarmRestore | notification | - | .1.3.6.1.4.1.3902.1012.3.45.180 |
| zxGponOltTxPowerAbnormalInform | notification | - | .1.3.6.1.4.1.3902.1012.3.45.181 |
| zxGponOltTxPowerNormalInform | notification | - | .1.3.6.1.4.1.3902.1012.3.45.182 |
| zxGponOltFakedSN OLT detects a faked SN event. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.183 |
| zxGponOnuConstantOptical It indicate ONU constant optical. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.184 |
| zxGponOnuConstantOpticalRestore It indicate ONU constant optical restore. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.185 |
| zxGponOnuFiberBending It indicate ONU constant optical. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.186 |
| zxGponOnuFiberBendingRestore It indicate ONU constant optical restore. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.187 |
| zxGponOnuOpticalTransceiverLos It indicate ONU constant optical. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.188 |
| zxGponOnuOpticalTransceiverLosRestore It indicate ONU constant optical restore. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.189 |
| zxGponMacSpoofing It indicate Gpon port mac spoolfing. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.190 |
| zxGponUnauthOnuOnline It indicate ONU constant optical. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.191 |
| zxGponOltTF TF is Transmitter Failure. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.192 |
| zxGponOltTFRestore TF is Transmitter Failure. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.193 |
| zxGponOltFakedPassword OLT detects a faked passwrod event. | notification | - | .1.3.6.1.4.1.3902.1012.3.45.194 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| RFC1213-MIBifIndex mandatory A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of… | column | Integer32 | .1.3.6.1.2.1.2.2.1.1 |
| zxGponOntDevMgmtName | column | OctetString | .1.3.6.1.4.1.3902.1012.3.28.1.1.2 |
| zxGponOntDevMgmtTypeName | column | OctetString | .1.3.6.1.4.1.3902.1012.3.28.1.1.1 |
| zxGponOntDevMgmtDescription The definition size of description does not include the termination. | column | OctetString | .1.3.6.1.4.1.3902.1012.3.28.1.1.3 |