zxAnXdsl2LConfInpMin8ShineUs

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.3.20.1.34
Commands MIB view Table view

Object

column r/w DMT symbolInteger32 
GINP configuration parameters of upstream.
The INPMIN8_SHINE_RTX is a configuration parameter that, for the 
case of subcarrier spacing of 8.625kHz, is used to derive the 
control parameter INP_min which specifies the minimum impulse 
noise protection against SHINE.
It is used in the Channel Initialization Policy and on-line 
reconfiguration procedures.
The downstream and upstream values of INPMIN8_SHINE_RTX shall be 
configured in the CO MIB.
The value range from 0 to 127 DMT symbols of 8.625 kHz in steps of 
1 DMT.
The control parameter INP_min shall be set to the same value as the
configuration parameter INPMIN8_SHINE_RTX.

Context

MIB
ZTE-AN-XDSL2-MIBII
OID
.1.3.6.1.4.1.3902.1015.1001.1.3.20.1.34
Type
column
Access
readwrite
Status
current
Units
DMT symbol
Parent
zxAnXdsl2ExtConfPrfEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LConfInpMin8ShineUs'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LConfInpMin8ShineUs.<zxAnXdsl2LConfExtPrfName>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LConfInpMin8ShineUs'

Syntax

DMT symbolInteger32

Values & Constraints

Object Constraints
range: 0-127