zxAnPonOnuCfmMepRmepIds

ZTE-AN-PON-REMOTE-ONU-MIB · .1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.10
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
This attribute lists up to 12 expected peer MEPs for CCMs,
[IEEE 802.1ag] allows for multipoint networks, and therefore a list 
 of peer MEPs. This attribute allows for up to 12 peers for a 
 given MEP, though G-PON applications are expected to need only 
 a single peer. Missing or unexpected messages trigger alarm 
 declaration after a soak interval. 
 it should be set to null if unused peer MEP.
 e.g., 1,3-5 means the used peer MEPs are 1,3,4,5.

Context

MIB
ZTE-AN-PON-REMOTE-ONU-MIB
OID
.1.3.6.1.4.1.3902.1082.500.3.2.8.4.1.10
Type
column
Access
readwrite
Status
current
Parent
zxAnPonRmOnuCfmMepEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonOnuCfmMepRmepIds'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZTE-AN-PON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonOnuCfmMepRmepIds.<ifIndex>.<zxAnPonOnuIndex>.<zxAnPonRmOnuCfmMdId>.<zxAnPonOnuCfmMaId>.<zxAnPonOnuCfmMepId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-PON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-PON-REMOTE-ONU-MIB::zxAnPonOnuCfmMepRmepIds'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints
range: 0-64
Type Constraints
range: 0..255

Conformance

Member of
zxAnPonRmOnuCfmGroup