staticBridgePathAddressType

ZHONE-COM-BRIDGE-REC-MIB · .1.3.6.1.4.1.5504.4.7.18.1.2

Object

column Enumeration

If staticBridgeIPv6AddressType is set to macAddr(1), then
staticBridgeMacOrIpAddress represents a MAC Address,
and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress
are used for the bridge path.
              
If staticBridgeIPv6AddressType is set to ipAddr(2), then
staticBridgeMacOrIpAddress represents an IP Address,
and ifIndex, bridgeIfVlanId and staticBridgeMacOrIpAddress
are used for the bridge path.
              
If staticBridgeIPv6AddressType is set to vlanIdAddr(3) or 
intralinkAddr(7), then ifIndex and bridgeIfVlanId are 
used for the bridge path.
              
If staticBridgeIPv6AddressType is set to globalAddr(4), 
globalIntralinkAddr(8), or mvrAddr(13) then ifIndex 
is used for the bridge path. 
              
If staticBridgeIPv6AddressType is set to
dhcpAllowOui( 720901) then the first 3 bytes of the
MAC address contains the OUI that we will allow DHCP
addresses to be granted to, global scope.
              
If staticBridgeIPv6AddressType is set to dhcpIpAddr(9), or
to dhcpMacAddr(10), then the other fields are populated
as for address types ipAddr and macAddr respectively,
with the difference that these are secure entries,
learned by snooping DHCP.
              
If staticBridgeIPv6AddressType is set to vlanParms(14), 
then the static bridge entry holds parameters for 
the given VLAN and SLAN ID (for example, flap mode, 
unicast aging period, etc) and is not associated 
with any specific bridge, but with all bridges 
with the same VLAN/SLAN ID. For this reason, 
the IfIndex of this entry must be zero. 
              
If staticBridgeIPv6AddressType is set to secMvrAddr(15), 
then the static bridge entry holds parameters for 
a Secondary MVR path. The VLAN ID of this entry is
the Secondary VLAN ID.
              
If staticBridgeIPv6AddressType is set to ipAddrV6(16), then
staticBridgeMacOrIpAddress represents an IPv6 Address,
and ifIndex, bridgeIfVlanId and staticBridgeIPv6MacOrIpAddress
are used for the bridge path.
              
              
If staticBridgeIPv6AddressType is set to dhcpIpAddrV6(17), or
to dhcpMacAddr(10), then the other fields are populated
as for address types ipAddr and macAddr respectively,
with the difference that these are secure entries,
learned by snooping DHCP.

Context

MIB: ZHONE-COM-BRIDGE-REC-MIB
OID: .1.3.6.1.4.1.5504.4.7.18.1.2
Type: column
Access: noaccess
Status: current
Parent: staticBridgePathEntry
Table: staticBridgePathTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	macAddr
`2`	ipAddr
`3`	vlanIdAddr
`4`	globalAddr
`7`	intralinkAddr
`8`	globalIntralinkAddr
`9`	dhcpIpAddr
`10`	dhcpMacAddr
`13`	mvrAddr
`14`	vlanParms
`15`	secMvrAddr
`16`	ipAddrV6
`17`	dhcpIpAddrV6
`720901`	dhcpAllowOui

Related Objects

Sibling Objects

Object	Type	Syntax	OID
staticBridgePathMacOrIpAddress If the staticBridgeAddressType is set to macAddr(1), then this field represents a MAC address. If the staticBridgeAddressType is set to ipAddr(2), then this field r…	column	NetworkAddress	`.1.3.6.1.4.1.5504.4.7.18.1.1`
staticBridgePathLoopPrevention This field does the following options,'BlockAsym(1)' blocks a learning bridge if flap is detected between it and an uplink bridge. 'BlockAll(2)' incorporates 'blockAsym(1)' but i…	column	Enumeration	`.1.3.6.1.4.1.5504.4.7.18.1.10`
staticBridgePathIgmpDscp This parameter indicates DSCP value for igmp traffic. Valid code values: <0-63> Differentiated services codepoint value af11 …	column	OctetString	`.1.3.6.1.4.1.5504.4.7.18.1.11`
staticBridgePathMulticastAging Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A…	column	Integer32	`.1.3.6.1.4.1.5504.4.7.18.1.3`
staticBridgePathRowStatus Used to create, modify or delete an entry in this table.	column	Zhone-TCZhoneRowStatus	`.1.3.6.1.4.1.5504.4.7.18.1.4`
staticBridgePathFlapControl This object enables or disable Flap Control in the Bridge Filter Table. The value 'disable(2)' turns Flap Control mode off. The values 'enable(3)' or 'fast(4) turn flap control …	column	Enumeration	`.1.3.6.1.4.1.5504.4.7.18.1.5`
staticBridgePathUnicastAging Multicast Aging period in tenths of seconds for the specified VLAN. After the specified aging period is met, the VLAN address is deleted from the routing table. A…	column	Integer32	`.1.3.6.1.4.1.5504.4.7.18.1.6`
staticBridgePathIgmpQueryInterval How often (in seconds) we as a bridge inject IGMP query values into the stream.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.5504.4.7.18.1.7`
staticBridgePathFlags none : IGMP Snooping with Proxy reporting is disabled. BIT 0(igmpProcessJoinAndLeave) : igmpProcessJoinandLeave is enabled for IGMP packets. BIT …	column	Bits	`.1.3.6.1.4.1.5504.4.7.18.1.8`
staticBridgePathIgmpCustomIpAddress Allow the configuration of the source IP address for packets that we originate upstream when doing IGMP Porxy on a bridge.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.4.7.18.1.9`