bridgeIfSlanXlateFrom
ZHONE-COM-BRIDGE-REC-MIB ·
.1.3.6.1.4.1.5504.4.7.2.1.38
Object
column
r/w
Integer32
If a packet's SLAN ID value matches this object's
value then the packet's SLAN ID will be translated
to the value of bridgeIfStagId.
A zero value disables translation.
Context
- MIB
- ZHONE-COM-BRIDGE-REC-MIB
- OID
.1.3.6.1.4.1.5504.4.7.2.1.38- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bridgeInterfaceEntry
- Table
- bridgeInterfaceTable
- Siblings
- 44
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bridgeIfVpi If this bridge interface is on an ATM VC, the ATM VPI
is specified here. If the bridge interface is not an ATM VC,
this field is ignored. The VPI value for a VPL or VCL. The … | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.5504.4.7.2.1.1 |
| bridgeIfLearnMulticast If true, snoop multicast packets for IGMP joins/leaves. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.10 |
| bridgeIfForwardToUnicast If true, attempt to forward via unicast MAC paths. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.11 |
| bridgeIfForwardToMulticast If true, attempt to forward via multicast MAC paths. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.12 |
| bridgeIfForwardToDefault If true, attempt to forward via VLAN default paths. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.13 |
| bridgeLowerIfIndex An entry exists for each bridge interface in the
system. Only Ifindex and lower if index is needed
to create a row. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5504.4.7.2.1.14 |
| bridgeIfRowStatus This object is used to create and remove rows in the table.
See bridgeInterfaceEntry description for minimum requirements. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.7.2.1.15 |
| bridgeIfCustomDHCP If TRUE, forwards broadcast DHCPOFFER or DHCPACK
packets even if bridgeFilterBroadcast is TRUE for that
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.16 |
| bridgeIfIngressPacketRuleGroupIndex Index used as partial address of a group of entries
in the packetRuleTable, each of which prescribes
a filtering condition for the ingress interface. | column | PacketRuleGroupIndex | .1.3.6.1.4.1.5504.4.7.2.1.17 |
| bridgeIfVlanIdCOS The Class-Of-Service (COS) value used for VLAN Tag Insertion. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.18 |
| bridgeIfOutgoingCOSOption Determines COS setting on packets bridged out this interface.
disable - COS setting is untouched.
all - COS will be set to bridgeIfOutgoingCOSValue. | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.19 |
| bridgeIfVci If this bridge interface is on an ATM VC, the ATM VCI is
specified here. The range is 32...65535. The maximum VCI
value cannot exceed the value allowable by atmInterfaceMaxVciB… | column | ATM-TC-MIBAtmVcIdentifier | .1.3.6.1.4.1.5504.4.7.2.1.2 |
| bridgeIfOutgoingCOSValue The COS value loaded into outgoing tagged packets.
Applicable only if interface sends tagged packets and
bridgeIfOutgoingCOSOption is outgoingCOSOption_all. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.20 |
| bridgeIfStagTPID The value of the tag protocol identifier that is being
used for QinQ packets. (0x8100 is default.) | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.21 |
| bridgeIfStagId The s-tag value that we are expecting to put on packets
that are Rxed on this interface. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.22 |
| bridgeIfStagStripAndInsert If true, enable S-tag tagging on this IF. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.23 |
| bridgeIfStagOutgoingCOSOption Determines s-tag COS settings on packets bridged
out this interface:
disable - s-tag COS setting just passed as Rxed.
all - s-tag COS will be set with s_tagOutgoingCOSValue. | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.24 |
| bridgeIfStagCOS The s-tag COS to be used when doing s-tag insertion. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.25 |
| bridgeIfStagOutgoingCOSValue The s-tag COS value loaded into outgoing tagged packets.
Applicaple only if interface sends S-tagged packets and
s_tagOutgoingCOSOption is All. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.26 |
| bridgeIfMcastControlList List of mcast-control-ids this bridge-interface-record
is associated with. It is an integer stored as string, and
controls which channels a user can watch. Note: unlike
for IP, a… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.4.7.2.1.27 |
| bridgeIfMaxVideoStreams Maximum number of multicast (video) streams that
we will support. | column | Unsigned32 | .1.3.6.1.4.1.5504.4.7.2.1.28 |
| bridgeIfIsPPPoA If true, this interface accepts PPPoA packets and will
bridge them out as PPPoE packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.29 |
| bridgeIfVlanId The Virtual LAN Id for VLAN Tag Insertion. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.3 |
| bridgeIfFloodUnknown If true, flood frames with unknown unicast MAC
address that would otherwise be discarded. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.30 |
| bridgeIfFloodMulticast If true, flood all multicast traffic received on
this bridge to all other ports on this vlan. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.31 |
| bridgeIfEgressPacketRuleGroupIndex Index used as partial address of a group of entries
in the packetRuleTable, each of which prescribes
a filtering condition for the egress interface. | column | PacketRuleGroupIndex | .1.3.6.1.4.1.5504.4.7.2.1.32 |
| bridgeIfTableBasedFilter none : Dynamic IP Filtering on bridge based on DHCP,
is disabled.
BIT 1(mac) : MAC address based Filtering based on DHCP, is enabled.
BIT 2(ip) : IP address ba… | column | Bits | .1.3.6.1.4.1.5504.4.7.2.1.33 |
| bridgeIfDhcpLearn none :IP address and Mac address are not learned from DHCP packets.
BIT 1 (mac): MAC addresses are learned from DHCP packets.
ip 2 (ip) : IP addresses are learned from DHCP… | column | Bits | .1.3.6.1.4.1.5504.4.7.2.1.34 |
| bridgeIfOnDemandStatsEnabled If true, the on-demand stats collection for this bridge
interface will be enabled and packets will be counted.
If bytes, the on-demand stats collection for this bridge
interface … | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.35 |
| bridgeIfMvrVlan The Multicast Vlan Registration (MVR) vlan ID.
Multicast video packets with this vlan can be
vlan translated out this bridge. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.36 |
| bridgeIfVlanXlateFrom If a packet's VLAN ID value matches this object's
value then the packet's VLAN ID will be translated
to the value of bridgeIfVlanId.
A zero value disables translati… | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.37 |
| bridgeIfBridgeState Values:
up(1), UP
down(2), DWN
trouble(3), TRB
notAvailable(4), NA
initializing(5), INI
adminDown(6), ADN
adminStateT… | column | BridgeState | .1.3.6.1.4.1.5504.4.7.2.1.39 |
| bridgeIfStripAndInsert If true, enable VLAN Tagging. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.4 |
| bridgeIfUnblock Set to TRUE to unblock a bridge that is
blocked due to flapping. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.40 |
| bridgeType bridge type | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.41 |
| bridgeIfGponGemPortId GPON GEM Port ID used only to create a bridge on a GPON ONU. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.7.2.1.42 |
| bridgeIfGponTrafficProfile GPON Traffic Profile Index used only to create a bridge
on a GPON ONU. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.7.2.1.43 |
| bridgeIfIncomingCOSOption Determines COS settings on incoming packets bridged
out this interface:
disable - COS replcement feature is disabled
all - COS will be set with vlanIDCOS. | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.44 |
| bridgeIfStagIncomingCOSOption Determines s-tag COS settings on incoming packets bridged
out this interface:
disable - s-tag COS setting just passed as Rxed.
all - s-tag COS will be set with s-tagIdCOS. | column | Enumeration | .1.3.6.1.4.1.5504.4.7.2.1.45 |
| bridgeIfCustomARP If true, send ARP requests selectively or by flood. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.5 |
| bridgeIfFilterBroadcast If true, discard non-ARP broadcast packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.6 |
| bridgeIfLearnIp If true, snoop unicast packets to build ARP table. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.7 |
| bridgeIfLearnUnicast If true, snoop unicast packets to build MAC paths. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.7.2.1.8 |
| bridgeIfMaxUnicast Maximum number of unicast addresses for I/F. | column | Integer32 | .1.3.6.1.4.1.5504.4.7.2.1.9 |