qos3PolicyPidAction
ZELAX-MIB ·
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.29
Object
column
r/w
Bits
simple policy action,for example: if you want to config cos(0) and setSTpid(10),you must set 8020 (1000 0000 0010 0000). some network Management Software offer selections that is not correct,in RFC3417,When encoding an object whose syntax is described using the BITS construct, the value is encoded as an OCTET STRING, in which all the named bits in (the definition of) the bitstring, commencing with the first bit and proceeding to the last bit,are placed in bits 8 (high order bit) to 1 (low order bit) of the first octet, followed by bits 8 to 1 of each subsequent octet in turn, followed by as many bits as are needed of the final subsequent octet, commencing with bit 8. Remaining bits,if any, of the final octet are set to zero on generation and ignored on receipt.
Context
- MIB
- ZELAX-MIB
- OID
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qos3PolicyEntry
- Table
- qos3PolicyTable
- Siblings
- 47
Syntax
Bits
Values & Constraints
Enumerated Values
0 | cos |
1 | dscp |
2 | ipPrecedence |
3 | ipNextHop |
4 | exp |
5 | ipv6NextHop |
6 | intp |
7 | dp |
8 | setCvid |
9 | setSvid |
10 | setSTpid |
11 | addSvid |
12 | delCvid |
13 | setTunnelId |
14 | transmit |
15 | drop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qos3PolicyMapIndex the index of policy that you configured at qos3PolicyMapGroupTable | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.1 |
| qos3PolicyconformSetCos Set COS | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.10 |
| qos3PolicyconformSetDscp Change dscp | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.11 |
| qos3PolicyconformSetPrec Change precedence | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.12 |
| qos3PolicyconformSetIntp Set Internal priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.13 |
| qos3PolicyconformSetDp Set Drop priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.14 |
| qos3PolicyExceedAction Action when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). | column | Bits | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.15 |
| qos3PolicyExceedSetCos Set COS | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.16 |
| qos3PolicyExceedSetDscp Change dscp | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.17 |
| qos3PolicyExceedSetPrec Change precedence | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.18 |
| qos3PolicyExceedSetIntp Set Internal priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.19 |
| qos3PolicyClassMapName Specify the classmap name.After a policy map is created, it can be associated to a class | column | OctetString | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.2 |
| qos3PolicyExceedSetDp Set Drop priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.20 |
| qos3PolicyViolateAction Action when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). | column | Bits | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.21 |
| qos3PolicyViolateSetCos Set COS | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.22 |
| qos3PolicyViolateSetDscp Change dscp | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.23 |
| qos3PolicyViolateSetPrec Change precedence | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.24 |
| qos3PolicyViolateSetIntp Set Internal priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.25 |
| qos3PolicyViolateSetDp Set Drop priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.26 |
| qos3PolicyAggregatePolicer the name of aggregate policy | column | DisplayString | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.27 |
| qos3PolicyAccounting enable the Counter statistics or not. | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.28 |
| qos3PolicyInsertClassMapName Specify the position of classmap name | column | OctetString | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.3 |
| qos3SetCos set cos | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.30 |
| qos3SetIpDscp change dscp | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.31 |
| qos3SetIpPrec change precedence | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.32 |
| qos3SetIntp Set Internal priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.33 |
| qos3SetDp Set Drop priority | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.34 |
| qos3SetCVid set vlan id of inner VLAN tag. | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.35 |
| qos3SetSVid set vlan id of outer VLAN tag. | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.36 |
| qos3SetSTpid Set S-tpid | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.37 |
| qos3AddSVid add vlan id of outer VLAN tag | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.38 |
| qos3DelCVid delete vlan id of inner VLAN tag. | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.39 |
| qos3PolicyType pidAction means simple policy.colorAction and aggregateAction is Mutually exclusive,for example,if you
want the pidAction and colorAction become effective,you must set the value … | column | Bits | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.4 |
| qos3SetTunnelId | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.40 |
| qos3SetIpDefaultPBR whether add Default routing of ip type. | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.41 |
| qos3SetIpVrf set the vrf of ip type | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.42 |
| qos3SetIpNextHop set Nexthop IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.43 |
| qos3SetExp set exp. | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.44 |
| qos3SetIpv6DefaultPBR whether add Default routing of ipv6 type | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.45 |
| qos3SetIpv6Vrf set the vrf of ipv6 type. | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.46 |
| qos3SetIpv6NextHop set Nexthop IPv6 address | column | OctetString | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.47 |
| qos3PolicyStatus the status of qos3PolicyTable. destroy(2) will put off the class-map,removeColorAct(3) will clear the color-act,
removeAggregateAct(4) will clear the aggregate-act,removePidAct(5)… | column | Enumeration | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.48 |
| qos3PolicyCIRKbps CIR(Committed Information Rate) Kbits per second <1-10000000> | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.5 |
| qos3PolicyCBSKbps CBS(Committed Burst Size) Kbytes <1-1000000> | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.6 |
| qos3PolicyPBSKbps PBS(Peak Burst Size) Kbytes <1-1000000> | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.7 |
| qos3PolicyPIRKbps PIR(Peak Information Rate) Kbits per second <1-10000000> | column | Integer32 | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.8 |
| qos3PolicyConformAction Action when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). | column | Bits | .1.3.6.1.4.1.7840.2.1.100.11.2.4.1.9 |