ZELAX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
154
Rows
154
Columns
951
.1.3.6.1.4.1.7840.2.1.100.1.7 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sysPowerStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sysPowerStateTable'
the power supply status is only used for chassis switch
sysPowerStateEntry row .1.3.6.1.4.1.7840.2.1.100.1.7.1
power supply status
Column Syntax OID
sysPowerSlotIndexModule model No.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.7.1.1
sysPowerStateif the power supply insertEnumeration
Enumerated Values:
0sysPowerNotInstalled
1sysPowerInstalled
.1.3.6.1.4.1.7840.2.1.100.1.7.1.2
sysPowerValuePower ValueSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.7.1.3
sysPowerTypePower TypeEnumeration
Enumerated Values:
0systemPower
1poePower
.1.3.6.1.4.1.7840.2.1.100.1.7.1.4
sysPowerStatusPower StatusEnumeration
Enumerated Values:
0normal
1abnormal
2na
.1.3.6.1.4.1.7840.2.1.100.1.7.1.5

sysSlotTable

table
.1.3.6.1.4.1.7840.2.1.100.1.8 · 1 row entry · 11 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sysSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sysSlotTable'
machine information,it is only used by chassis.
sysSlotEntry row .1.3.6.1.4.1.7840.2.1.100.1.8.1
Switch information
Indexes
Column Syntax OID
sysSlotIndexModule Model No.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.1
sysCPUTypeCPU typeDisplayString.1.3.6.1.4.1.7840.2.1.100.1.8.1.2
sysCPUFiveSecondIdleLast 5 second CPU IDLESNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.3
sysCPUThirtySecondIdleLast 30 second CPU IDLESNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.4
sysCPUFiveMinuteIdleLast 5 minute CPU IDLESNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.5
sysCPUIdleFrom running CPU IDLESNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.6
sysMemorySizememory sizeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.7
sysMemoryBusymemory usage rentSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.8
sysFlashSizeThe flash capacity of this slot.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.9
sysTemperatureThe Temperature of this slot.80 is 80centigradeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.10
sysCpuUsageThe CPU usage of this slot.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.8.1.11
.1.3.6.1.4.1.7840.2.1.100.1.9 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk switchInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::switchInfoTable'
Table of descriptive and status information about
switches in this system.
switchInfoEntry row .1.3.6.1.4.1.7840.2.1.100.1.9.1
An entry in the table, containing information
about a single switch in this system.
Column Syntax OID
swSlotIndexThis object identifies the slot within the switch
for which this entry contains information.
While for the chassis device, the value is real switch slot number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.9.1.1
swUnitIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.9.1.2
swModuleTypeType of expansion module in this switch slot.Enumeration
Enumerated Values:
0typeMFC
1typeSFC
2type1GS
3type1GL
4type100M1GT
8type10M100MT
101type1-M12GB
102type1-12GT
103type1-210Gx
104type1-110Gx
105type1-CPU8245
106type1-BACKPLANE
107type1-24GB
108type1-24GT
109type1-36TX
110type1-4GX32TX
111type1-16FX
112type1-ES2GB
113type1-M4GX24TX
114type1-ES
115type1-MI
116type1-MII
117type1-12GB
118type1-M8GB
119type1-2XFP8GX16GB
120type1-8GX16GB
121type1-4GX24TX
122type1-L-M4GX24TX
123type1-1XFP8GX16GB
124type1-2XFP12GX12GT
125type1-12GX12GT
126type1-1XFP12GX12GT
127type1-48GT
128type1-M1XFP12GX12GT
129type1-4XFP
130type1-48GB
131type1-M44GT
132type1-M1XFP12GX12GB
133type1-12GX12GB
134type1-2XFP12GX12GB
136type1-2XFP24GB12GT
137type1-24GB12GT
138type1-NEWMI
139type1-M1XFP12GX12GTR4
140type1-12GX12GTR4
141type1-2XFP12GX12GTR4
142type1-E-24GB12GT
143type1-E-2XFP24GB12GT
165type2-M12GB
166type2-12GT
167type2-210Gx
168type2-110Gx
169type2-CPU8245
170type2-BACKPLANE
171type2-24GB
172type2-24GT
173type2-36TX
174type2-4GX32TX
175type2-16FX
176type2-ES2GB
177type2-M4GX24TX
178type2-ES
179type2-MI
180type2-MII
181type2-12GB
182type2-M8GB
183type2-2XFP8GX16GB
184type2-8GX16GB
185type2-4GX24TX
186type2-L-M4GX24TX
187type2-1XFP8GX16GB
188type2-2XFP12GX12GT
189type2-12GX12GT
190type2-1XFP12GX12GT
191type2-48GT
192type2-M1XFP12GX12GT
193type2-4XFP
194type2-48GB
195type2-M44GT
196type2-M1XFP12GX12GB
197type2-12GX12GB
198type2-2XFP12GX12GB
200type2-2XFP24GB12GT
201type2-24GB12GT
202type2-NEWMI
203type2-M1XFP12GX12GTR4
204type2-12GX12GTR4
205type2-2XFP12GX12GTR4
206type2-E-24GB12GT
207type2-E-2XFP24GB12GT
228type3-M
229type3-MI
230type3-MII
231type3-24GT
232type3-24GB
233type3-ES-FW
234type3-4XFP
235type3-8XFP
236type3-24GT-V
237type3-24GB-V
238type3-24SFP-PLUS
239type3-08BACKPLANE
240type3-16BACKPLANE
300type4-4GT
301type4-4FX
302type4-2GB
303type4-4TX
304type4-4GB
305type4-4FB
.1.3.6.1.4.1.7840.2.1.100.1.9.1.3

sysFanTable

table
.1.3.6.1.4.1.7840.2.1.100.1.12 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sysFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sysFanTable'
the state of fan.
sysFanEntry row .1.3.6.1.4.1.7840.2.1.100.1.12.1
fan supply status
Indexes
Column Syntax OID
sysFanIndexsystem fan entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.12.1.1
sysFanInsertedWhether the slot fan is installed or not.Enumeration
Enumerated Values:
0sysFanNotInstalled
1sysFanInstalled
.1.3.6.1.4.1.7840.2.1.100.1.12.1.2
sysFanStatusWhether the slot fan is normal or abnormal.Enumeration
Enumerated Values:
0normal
1abnormal
.1.3.6.1.4.1.7840.2.1.100.1.12.1.3
sysFanSpeedStatus of Fan. Status: Low(1), Medium(2), High(3), none(0) is readonlyEnumerationr/w
Enumerated Values:
0none
1low
2medium
3high
.1.3.6.1.4.1.7840.2.1.100.1.12.1.4
.1.3.6.1.4.1.7840.2.1.100.1.17 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sysSoltBootInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sysSoltBootInfoTable'
A list of boot information.it is only used by chassis.
sysSoltBootInfoEntry row .1.3.6.1.4.1.7840.2.1.100.1.17.1
Entry for boot information.
Column Syntax OID
sysBootInfoIndexslot NO.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.1.17.1.1
sysBootImgPrimarySet or get filename of boot img for first time,and the length of filename is between 1 and 128.OctetStringr/w
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.1.17.1.2
sysBootImgSecondarySet or get filename of boot img for backup,and the length of filename is between 1 and 128.OctetStringr/w
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.1.17.1.3
sysBootStartupCfgSet or get filename of boot startup config ,and the length of filename is between 1 and 128.OctetStringr/w
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.1.17.1.4
.1.3.6.1.4.1.7840.2.1.100.2.2.2 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mstpInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mstpInstanceTable'
correlative information list with instance
mstpInstanceEntry row .1.3.6.1.4.1.7840.2.1.100.2.2.2.1
The index of this table is instance ID
Indexes
Column Syntax OID
mstpInstanceIDinstance IDSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.1
mstpInstanceVlansthe map of vlans to instance.The input format is consonant with cli.OctetStringr/w
Constraints:
range: 0-512
.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.2
mstpInstanceSwitchPrioritythe priority of the router in the special instance.Integer32r/w
Constraints:
range: 0-61440
.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.3
mstpInstanceRegionRootIDthe region root ID in the special instance.OctetString.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.4
mstpInstanceIntRootPathCostthe path cost from self bridge to Region Root.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.5
mstpInstanceRootPortIDthe root port ID in the special instance.OctetString.1.3.6.1.4.1.7840.2.1.100.2.2.2.1.6
.1.3.6.1.4.1.7840.2.1.100.2.2.3 · 1 row entry · 12 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mstpInstancePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mstpInstancePortTable'
interrelated parameter list of instance and port
mstpInstancePortEntry row .1.3.6.1.4.1.7840.2.1.100.2.2.3.1
The index of this table is instance ID and port index
Column Syntax OID
mstpInstancePortInstanceIDinstance IDSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.1
mstpInstancePortPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.2
mstpInstancePortCostport cost of port under the special instanceInteger32r/w
Constraints:
range: 1-200000000
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.3
mstpInstancePortPriorityport priority of port under the special instanceInteger32r/w
Constraints:
range: 0-240
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.4
mstpInstancePortRootGuardrootguard enable/disable on the current instanceEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.5
mstpInstancePortIDID of port which receive a BPDUOctetString.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.6
mstpInstancePortExtRootPathCostthe path cost from self bridge to Root bridgeSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.7
mstpInstancePortIntRootPathCostthe path cost from self bridge to Region RootSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.8
mstpInstancePortStatethe port state in the instanceEnumeration
Enumerated Values:
0block
1forwarding
2learning
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.9
mstpInstancePortRolethe port role in the instanceEnumeration
Enumerated Values:
0nonstp
1alternate
2root
3designated
4backup
5master
6disabled
.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.10
mstpInstancePortDesignatedBridgeIDthe designated bridge IDOctetString.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.11
mstpInstancePortDesignatedPortIDthe designated port IDOctetString.1.3.6.1.4.1.7840.2.1.100.2.2.3.1.12
.1.3.6.1.4.1.7840.2.1.100.2.2.4 · 1 row entry · 8 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mstpPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mstpPortInfoTable'
mstp information list of port
mstpPortInfoEntry row .1.3.6.1.4.1.7840.2.1.100.2.2.4.1
The index of this table is port index
Column Syntax OID
mstpPortInfoPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.1
mstpPortInfoEnableenable/disable mstp on the port.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.2
mstpPortLinkTypethe p2p link type of the portEnumerationr/w
Enumerated Values:
0force-false
1force-true
2auto
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.3
mstpPortMchecktrigger/untriggerEnumerationr/w
Enumerated Values:
0untrigger
1trigger
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.4
mstpPortPortFastdefault:the port mode is portfast mode
bpdufilter:the port mode is portfast mode with bpdufilter
bpduguard:the port mode is portfast mode with bpduguard
noportfast:the port mode is not portfast mode
Enumerationr/w
Enumerated Values:
0default
1bpdufilter
2bpduguard
3noportfast
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.5
mstpPortFormatwhich mode can be setted up port of message format functionEnumerationr/w
Enumerated Values:
0standard
1privacy
2auto
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.6
mstpPortDigestSnpWhether the port use peer's authentication keyEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.7
mstpPortTCFlushwhen topology is changed, how to flush the macEnumerationr/w
Enumerated Values:
0useglobal
1enable
2disable
3protect
.1.3.6.1.4.1.7840.2.1.100.2.2.4.1.8

portTable

table
.1.3.6.1.4.1.7840.2.1.100.3.2 · 1 row entry · 22 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portTable'
A list of port entries.
priPortEntry row .1.3.6.1.4.1.7840.2.1.100.3.2.1
A port entry containing port information,
status, and control.
Indexes
Column Syntax OID
portIndexport No.Integer32
Constraints:
range: 1-1024
.1.3.6.1.4.1.7840.2.1.100.3.2.1.1
portNameName of the port. exp:financial.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.7840.2.1.100.3.2.1.2
switchNumThis value is denoting the number of swith in which this port resides.
For the non-stackable device,the value is always 1.
While for the stackable device, the value is real switch stack number.
Integer32
Constraints:
range: 0-16
.1.3.6.1.4.1.7840.2.1.100.3.2.1.3
slotNumThis value is denoting the number of slot.
For the static slot,the value is 1,while for
the extended slot the value is real extended slot number.
Integer32
Constraints:
range: 0-16
.1.3.6.1.4.1.7840.2.1.100.3.2.1.4
portTypeType of expansion module in this port.Enumeration
Enumerated Values:
0typeSFP
1typeCombo
2typeFiber
3typeSingleOptFE
4typeMultiOptFE
5typeElecFE
6typeSingleOptGE
7typeMultiOptGE
8typeElecGE
9typePortAGG
10typePortUsbGE
11typeOptXge
255other
.1.3.6.1.4.1.7840.2.1.100.3.2.1.5
flowControlStatusThe flow-control status of the port.
Its functionality is exactly same as 'flow control' or 'no flow control' commands
in console mode.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.3.2.1.6
bandwidthControlStatusThe bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.
Enumeration
Enumerated Values:
0ingress
1egress
2both
3none
.1.3.6.1.4.1.7840.2.1.100.3.2.1.7
maxBandwidthThe max bandwidth of the port.Enumeration
Enumerated Values:
0default
1bw100M
2bw1000M
3bw10000M
.1.3.6.1.4.1.7840.2.1.100.3.2.1.8
receiveBandwidthThe recevice bandwidth of the port. Its unit is kbs.
The command 'bandwidth control 50 both' in console mode equals
setting both receiveBandwidth and transmitBandwidth to 50 kbs.
Set 0 is no bandwidth.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.2.1.9
transmitBandwidthThe transmit bandwidth of the port. Its unit is kbs.
Set 0 is no bandwidth.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.2.1.10
shutdownClose or open to specify the port.Enumerationr/w
Enumerated Values:
0shutDown
1noshutdown
.1.3.6.1.4.1.7840.2.1.100.3.2.1.12
loopbackOpen or close to specify the wreath of
the port back to test the function.
Enumerationr/w
Enumerated Values:
0noloopback
1loopback
.1.3.6.1.4.1.7840.2.1.100.3.2.1.13
speedDuplexThe speed and duplex status of the port.Enumerationr/w
Enumerated Values:
0auto
1half10
2full10
3half100
4full100
5half1000
6full1000
7half-1000-M
8half-1000-s
9full-1000-M
10full-1000-s
13fx-100
14fx-100-phy
15fx-100-no-phy
16neg-10-auto
17neg-10-full
18neg-10-half
19neg-10-100-auto
20neg-10-100-full
21neg-10-100-half
22neg-10-100-1000-full
23neg-10-100-1000-half
.1.3.6.1.4.1.7840.2.1.100.3.2.1.14
portModeport mode: 1 is access,2 is trunk,3 is hybridEnumerationr/w
Enumerated Values:
1access
2trunk
3hybrid
.1.3.6.1.4.1.7840.2.1.100.3.2.1.15
pvidport of native vlan No.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.2.1.16
indicatesTypeIndicates the port type of the configuration of the switch.Enumeration
Enumerated Values:
1other
2hundredBaseTX
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8thousandBaseSfp
9hundredBaseFxScSingleMode
10hundredBaseFxScMultiMode
11thousandBaseCX
12tenG
.1.3.6.1.4.1.7840.2.1.100.3.2.1.17
vctActionThis object indicates the VCT action of the port,only the value 1 is permitted
when SET this entry though you can GET 1(processing) and 0(succeed);
The specified port will be shutdown when one sets 1 to this entry,and …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.2.1.18
vctLastStatusIndicates the last VCT status of the port.OctetString
Constraints:
range: 0-1000
.1.3.6.1.4.1.7840.2.1.100.3.2.1.19
portTrunkAllowedvlantrunk port allowed vlan list stringOctetStringr/w.1.3.6.1.4.1.7840.2.1.100.3.2.1.20
portHybridTaggedAllowedvlanhybrid port tagged allowed vlan list stringOctetStringr/w.1.3.6.1.4.1.7840.2.1.100.3.2.1.21
portHybridUntaggedAllowedvlanhybrid port untagged allowed vlan list stringOctetStringr/w.1.3.6.1.4.1.7840.2.1.100.3.2.1.22
portBandWidthUsageThe percentage of the port's bandwidth usageInteger32
Constraints:
range: 0-100
.1.3.6.1.4.1.7840.2.1.100.3.2.1.23
.1.3.6.1.4.1.7840.2.1.100.3.3 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk stormControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::stormControlTable'
storm-contol table
stormControlEntry row .1.3.6.1.4.1.7840.2.1.100.3.3.1
storm-control entry
Column Syntax OID
stormControlIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.3.1.1
stormControlTypebroadcast(broadcast rate suppression),multicast(multicast rate suppression),
unicast(unicast rate suppression),dlf(Destination Lookup Failure rate suppression),
brmc(broadcast and multicast rate suppression),brmcdlf(Bro…
Enumeration
Enumerated Values:
0broadcast
1multicast
2unicast
3dlf
4brmc
5brmcdlf
6all
.1.3.6.1.4.1.7840.2.1.100.3.3.1.2
stormControlRatethe suppress rate.the value range at <1-1488095> or <1-1000000> on different devices.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.3.1.3
stormControlStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entryEnumerationr/w
Enumerated Values:
0destroy
1active
.1.3.6.1.4.1.7840.2.1.100.3.3.1.4
.1.3.6.1.4.1.7840.2.1.100.3.4.3 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk loopbackDetecCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::loopbackDetecCtrlTable'
A table containing current configuration information for
the function of loopback detection control.
loopbackDetecCtrlEntry row .1.3.6.1.4.1.7840.2.1.100.3.4.3.1
An entry in the loopback detection control table.
Column Syntax OID
lpbackDetecCtrlIndexAn unique value for each port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.4.3.1.1
lpbackDetecCtrlModeIndicates the control type of the configuration of the loopback detection.
The default value is 0. When the value is set to 0,the loopback detection control function will be disabled.
Enumerationr/w
Enumerated Values:
0nocontrol
1shutdown
2block
.1.3.6.1.4.1.7840.2.1.100.3.4.3.1.2
.1.3.6.1.4.1.7840.2.1.100.3.4.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk loopbackDetecSpecVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::loopbackDetecSpecVlanTable'
Setting the loopback detection function for the specified vlan of the port.
loopbackDetecSpecVlanEntry row .1.3.6.1.4.1.7840.2.1.100.3.4.4.1
An entry in the loopbackDetecSpecVlanTable.
Column Syntax OID
lpbackDetecVlanPortIndexAn unique value for each port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.4.4.1.1
lpbackDetecVlanListThe value is a vlan list that you will set.Please pay attention to the list of writing,eg:1;3;5-20 .OctetStringr/w
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.3.4.4.1.2
lpbackDetecVlanListSetFlagWhen lpbackDetecVlanListSetFlag is 1,open the
specified VLAN loopback detection function.When lpbackDetecVlanListSetFlag is 0,close the
specified VLAN loopback detection function.
Enumerationr/w
Enumerated Values:
0close
1open
.1.3.6.1.4.1.7840.2.1.100.3.4.4.1.3
.1.3.6.1.4.1.7840.2.1.100.3.4.5 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk loopbackDetecShowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::loopbackDetecShowTable'
Show the config and state of loopback detection for the specified port.
loopbackDetecShowEntry row .1.3.6.1.4.1.7840.2.1.100.3.4.5.1
An entry in the loopbackDetecShowTable.
Column Syntax OID
lpbackDetecShowPortIndexAn unique value for each port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.3.4.5.1.1
lpbackDetecShowInformationThe value display the configuration and state of loopback detection for the specified port.OctetString
Constraints:
range: 1-1024
.1.3.6.1.4.1.7840.2.1.100.3.4.5.1.2

iPAddrTable

table
.1.3.6.1.4.1.7840.2.1.100.4.3 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk iPAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::iPAddrTable'
A table of iPAddrEntry.
iPAddrEntry row .1.3.6.1.4.1.7840.2.1.100.4.3.1
A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…
Column Syntax OID
iPAddrVidThe VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.4.3.1.1
iPAddrIPAddressThe IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.4.3.1.2
iPAddrSubnetMaskThe subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out wha…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.4.3.1.3
iPAddrPrimaryInterfaceWhether this is a primary interface.Enumerationr/w
Enumerated Values:
0primary
1secondary
.1.3.6.1.4.1.7840.2.1.100.4.3.1.4
iPAddrStatusNow state.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.4.3.1.5
.1.3.6.1.4.1.7840.2.1.100.4.4 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk interfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::interfaceTable'
A table of interfaceEntry.
interfaceEntry row .1.3.6.1.4.1.7840.2.1.100.4.4.1
A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…
Column Syntax OID
intfacetypeThe Type of interface.
Now support(1)vintf and (2)loopback.
Enumeration
Enumerated Values:
1vintf
2loopback
3tunnel
.1.3.6.1.4.1.7840.2.1.100.4.4.1.1
intfaceIDThe Number of interface.
exp:intfacetype(1),interfaceID(2) means interface vlan 2.
if intfacetype(2) interfaceID(4) means interface loopback4.
if intfacetype(3) interfaceID(5) means interface Tunnel5.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.4.4.1.2
intfaceIndexThe Index of interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.4.4.1.3
intfaceStatusNow state.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.4.4.1.5
.1.3.6.1.4.1.7840.2.1.100.5.1 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::vlanInfoTable'
A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management.
vlanInfoEntry row .1.3.6.1.4.1.7840.2.1.100.5.1.1
Static information for a VLAN configured into the
device by (local or network) management.
Indexes
Column Syntax OID
vlanIDThis value is vlan's ID.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.5.1.1.1
vlanNamewhich may be used to identify the VLAN.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.5.1.1.2
vlanPortNumberThe sum of vlan's ports.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.5.1.1.3
vlanRowStatusThis object indicates the status of this entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.5.1.1.4
.1.3.6.1.4.1.7840.2.1.100.5.2 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mvlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mvlanInfoTable'
A table containing current configuration information
for  Multicast VLAN .
mvlanInfoEntry row .1.3.6.1.4.1.7840.2.1.100.5.2.1
Static information for Multicast VLAN configured into the
device by (local or network) management.
Indexes
Column Syntax OID
mvlanIDThis value is mvlan's ID.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.5.2.1.1
mvlanStatusthe status of mVLAN:enable(1) to active a mvlanID;disable(0) is to destroy a mvlanID.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.5.2.1.2
mvlanAssoVlanListconfigure vlans association with multicast Vlan,such as'3-4'or '2,5,6',set or unset by Configuring mvlanAssoVlanStatus; geting vlans which associating with multicast Vlan .OctetStringr/w
Constraints:
range: 1-100
.1.3.6.1.4.1.7840.2.1.100.5.2.1.3
mvlanAssoVlanStatusthe status of mvlanAssoVlan:enable(1) to enable multicast Vlan association with Vlan;
disable(0) is to disable multicast Vlan association with Vlan.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.5.2.1.4
mvlanModeconfigure mode: when no configration,Default: 0.Enumerationr/w
Enumerated Values:
0default
1dynamic
2compatible
.1.3.6.1.4.1.7840.2.1.100.5.2.1.5
.1.3.6.1.4.1.7840.2.1.100.5.3 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mvlanPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mvlanPortInfoTable'
A table containing current configuration information
for each Multicast VLAN .
mvlanPortInfoEntry row .1.3.6.1.4.1.7840.2.1.100.5.3.1
Static information for Multicast VLAN configured into the
device by (local or network) management.
Column Syntax OID
mvlanVIdThis value is mvlan's ID.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.5.3.1.1
mvlanPortIndexMvlan's port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.5.3.1.2
mvlanAssoPortTagidtagId of portIndex association with multicast Vlan,Default:0.if port needn't Tagid,
set portIndex association with mvlanVId only.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.5.3.1.3
mvlanPortStatusthe status of mvlanPortStatus:enable(1) to enable port association with multicast Vlan;
disable(0) is to disable port association with multicast Vlan.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.5.3.1.4
.1.3.6.1.4.1.7840.2.1.100.6.2 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk jumblyStackingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::jumblyStackingInfoTable'
Table of descriptive and status information about
jumbly stacking in this system.
jumblyStackingInfoEntry row .1.3.6.1.4.1.7840.2.1.100.6.2.1
An entry in the table, containing information
about stacking switch in this system.
Indexes
Column Syntax OID
stackingUnitIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.6.2.1.1
swHardwareVersionThe text string denoting the version of the hardware.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.6.2.1.2
swSoftwareVersionThe text string denoting the version of the software.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.6.2.1.3
swCPUMacthe Mac address of the machine.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.6.2.1.4
swTypeType of this switch.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.6.2.1.5
.1.3.6.1.4.1.7840.2.1.100.7.1 · 1 row entry · 8 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portSecurityTable'
The table of port security
portSecurityEntry row .1.3.6.1.4.1.7840.2.1.100.7.1.1
An entry in the port security table.
Indexes
Column Syntax OID
psPortIndexA unique value for each portSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.7.1.1.1
psPortSecurityenable or disable mac bind on this portEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.7.1.1.2
psSecuritytSaticMacAddbind Security mac address on this portOctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.7.1.1.3
psSecurityStaticMacDeldelete Security mac address on this portOctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.7.1.1.4
psSecurityPortLocklock or unlock this portEnumerationr/w
Enumerated Values:
0unlock
1lock
.1.3.6.1.4.1.7840.2.1.100.7.1.1.5
psSecurityPortMaxMaximum secure addrs on this portInteger32r/w
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.7.1.1.6
psSecurityPortConvertmacconvert dynamic mac to security macInteger32r/w
Constraints:
range: 1-1
.1.3.6.1.4.1.7840.2.1.100.7.1.1.7
psSecurityPortLocktimerlock timer on this portInteger32r/w
Constraints:
range: 0-300
.1.3.6.1.4.1.7840.2.1.100.7.1.1.8
.1.3.6.1.4.1.7840.2.1.100.7.2 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk securityMacPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::securityMacPortTable'
Table of descriptive and status information about security port
securityMacPortEntry row .1.3.6.1.4.1.7840.2.1.100.7.2.1
An entry in the security mac port table.
Column Syntax OID
secPortIndexA unique value for each portSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.7.2.1.1
secMacAdressMac adress bind on this portOctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.7.2.1.2
secVidvlan id of this port(pvid)SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.7.2.1.3
.1.3.6.1.4.1.7840.2.1.100.8.2 · 1 row entry · 12 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk priIgmpSnoopingVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::priIgmpSnoopingVlanTable'
IopgmpSnoing configuration in vlan.
priIgmpSnoopingEntry row .1.3.6.1.4.1.7840.2.1.100.8.2.1
IgmpSnooping confition in vlan.
Column Syntax OID
priIgmpSnoopingvlanIDThis value is vlan's ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.8.2.1.1
priIgmpSnoopingvlanEnableEnable or disable the IgmpSnooping in the switch.Default:0Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.8.2.1.2
priIgmpSnoopingleaveEnable or disable the immediate leave config.Default:0Enumerationr/w
Enumerated Values:
0no-immediate-leave
1immediate-leave
.1.3.6.1.4.1.7840.2.1.100.8.2.1.3
priIgmpSnoopingL2genEnable or disable the l2-general-querier config.Default:0Enumerationr/w
Enumerated Values:
0no-l2-general-querier
1l2-general-querier
.1.3.6.1.4.1.7840.2.1.100.8.2.1.4
priIgmpSnoopingGroupNumset the maximum IGMP group the port can joinInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7840.2.1.100.8.2.1.5
priIgmpSnoopingSourceNumset the maximum source numberInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7840.2.1.100.8.2.1.6
priIgmpSnoopingPortGet static mrouter port of vlan.
ethernet: Name of Ethernet port
ifname: Name of interface
port-channel: Port aggregation.
DisplayString.1.3.6.1.4.1.7840.2.1.100.8.2.1.7
priIgmpSnoopingPortTimeConfigure this survive time of mrouter port.Default: 255sInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7840.2.1.100.8.2.1.8
priIgmpSnoopingQueryIntervalConfigure this query interval. Default: 125sInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7840.2.1.100.8.2.1.9
priIgmpSnoopingQueryMrspConfigure the maximum query response period. Default: 10sInteger32r/w
Constraints:
range: 1-25
.1.3.6.1.4.1.7840.2.1.100.8.2.1.10
priIgmpSnoopingQueryRobustnessConfigure the query robustness.Default: 2Integer32r/w
Constraints:
range: 2-10
.1.3.6.1.4.1.7840.2.1.100.8.2.1.11
priIgmpSnoopingSuppressionConfigure the suppression query time.Default: 255sInteger32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.7840.2.1.100.8.2.1.12
.1.3.6.1.4.1.7840.2.1.100.8.3 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk priIgmpSnoopingBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::priIgmpSnoopingBindTable'
IgmpSnoing bind configuration.
priIgmpSnoopingBindEntry row .1.3.6.1.4.1.7840.2.1.100.8.3.1
IgmpSnooping bind configuration.
Column Syntax OID
priIgmpSnoopingVlanIDThis value is vlan's ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.8.3.1.1
priIgmpSnoopingGroupAddressThis value is group's ip address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.8.3.1.2
priIgmpSnoopingPortBitmapPort's bitmap.OctetString.1.3.6.1.4.1.7840.2.1.100.8.3.1.3
.1.3.6.1.4.1.7840.2.1.100.9.1 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dot1qTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dot1qTunnelTable'
port of qinq tunnel function list
dot1qTunnelEntry row .1.3.6.1.4.1.7840.2.1.100.9.1.1
configure of dot1qTunnel
Indexes
Column Syntax OID
qinqPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.9.1.1.1
tunnelPortEnableEnable or disable the dot1q-tunnel in this port.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.9.1.1.2
tunnelPortTypeProtocol type of trunk port(TPID)(exp:33024(0x8100)/37120(0x9100)/37376(0x9200)).SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.9.1.1.3
.1.3.6.1.4.1.7840.2.1.100.9.2 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk vlanTranslationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::vlanTranslationTable'
VLAN translation basic config.
vlanTranslationEntry row .1.3.6.1.4.1.7840.2.1.100.9.2.1
VLAN translation
Column Syntax OID
translatPortIndexIndex of Port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.9.2.1.1
translationEnableif the port can be done translation functionEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.9.2.1.2
translationDropTypewhen VLAN-translation missed, drop packet modeEnumerationr/w
Enumerated Values:
1in
2out
3both
4noIn
5noOut
6noBoth
.1.3.6.1.4.1.7840.2.1.100.9.2.1.3
.1.3.6.1.4.1.7840.2.1.100.9.3 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk vlanTranslationTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::vlanTranslationTypeTable'
port VLAN-translation of translation relation list
vlanTranslationTypeEntry row .1.3.6.1.4.1.7840.2.1.100.9.3.1
port VLAN translation of translation relation,index is port index and translation sort
Column Syntax OID
translatPortTypeIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.9.3.1.1
translationTypetranslation type. in:input translation; out:output translation.Enumeration
Enumerated Values:
1in
2out
.1.3.6.1.4.1.7840.2.1.100.9.3.1.2
translationOldVlanidvlantranslation pre-vidInteger32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.9.3.1.3
translationNewVlanidthe new vidInteger32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.9.3.1.4
translationTypeStatusaccession/delete VLAN-translation relationEnumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.9.3.1.5
.1.3.6.1.4.1.7840.2.1.100.10.1.2.1 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk timeRangeMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::timeRangeMapTable'
timeRange Map Table
timeRangeMapEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.2.1.1
timeRange Map Entry
Column Syntax OID
timeRangeMapIndexTimeRange Map index,the range of it is 1-(2^32-1).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.2.1.1.1
timeRangeMapNameTimeRange Map nameOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.1.2.1.1.2
timeRangeMapStatusTimeRange Map statusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.2.1.1.3
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk timeRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::timeRangeTable'
timeRange Table
timeRangeEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1
timeRange Entry
Column Syntax OID
timeRangeIndexTimeRange index,the allowed range is 1 to 1000.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.1
timeRangeSubIndexTimeRange sub index,the allowed range is 1 to 1000.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.2
timeRangeTypeTimeRange typeEnumerationr/w
Enumerated Values:
1absolute
2periodic
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.3
timeRangeStartWeekconfigurate the start week,for example: f8 means monday+tuesday+wednesday+thurday+friday,
the lowest bit is not used,so fe is the biggest.
Bitsr/w
Enumerated Values:
0monday
1tuesday
2wednesday
3thursday
4friday
5saturday
6sunday
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.4
timeRangeStartDateconfigurate the start Date,for example YYYY.MM.DD .DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.5
timeRangeStartTimeconfigurate the start clock,for example HH:MM:SS.DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.6
timeRangeEndWeekconfigurate the end week,for example: f8 means monday+tuesday+wednesday+thurday+friday,
the lowest bit is not used,so fe is the biggest.
Bitsr/w
Enumerated Values:
0monday
1tuesday
2wednesday
3thursday
4friday
5saturday
6sunday
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.7
timeRangeEndDateconfigurate the end date,for example YYYY.MM.DD.DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.8
timeRangeEndTimeconfigurate the end clock,for example HH:MM:SS.DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.9
timeRangeStatusstatus of timeRangeMapTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.2.2.1.10
.1.3.6.1.4.1.7840.2.1.100.10.1.3.1 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk numAclGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::numAclGroupTable'
this table is used for building a num-acl list.
numAclGroupEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.1.1
numAclGroup Table's Entry
Column Syntax OID
numAclGroupAclIndexthe index of number acl,ip standard <1-99>,ip extern <100-299>,mac standard <700-799>,
mac extern <1100-1199>,ipv6 standard <500-599> ipv6 extern <600-699>.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.1.1.1
numAclGroupMatchOrdervalue 0 means Acl rule's priority is automatically configured,
value 1 means Acl rule's priority is manually configured,
but now it's not supported.
Enumerationr/w
Enumerated Values:
0autoPriority
1configPriority
.1.3.6.1.4.1.7840.2.1.100.10.1.3.1.1.2
numAclGroupSubitemNumthe Number of one acl's rule.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.1.1.3
numAclGroupStatusthe status of number acl.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.1.1.4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk nameAclGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::nameAclGroupTable'
this table is used for building a name-acl list and mapping a string of named acl to a value of number,
when you want to config name-acl list,you must map at here.
nameAclGroupEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1
nameAclGroup Table's Entry
Column Syntax OID
nameAclGroupAclIndexthe index of name acl,the range starts at 20000.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.1
nameAclGroupAclNamethe name of name-acl.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.2
nameAclGroupAclTypethe type of name acl.Enumerationr/w
Enumerated Values:
0ipStandard
1ipExtern
2macStandard
3macExtern
4macIpExtern
5macIpStandard
6ipv6Standard
7ipv6Extern
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.3
nameAclGroupMatchOrdervalue 0 means Acl rule's priority is automatically configured,
value 1 means Acl rule's priority is manually configured,
but now it's not supported.
Enumerationr/w
Enumerated Values:
0autoPriority
1configPriority
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.4
nameAclGroupSubitemNumthe Number of one acl's rule.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.5
nameAclGroupStatusthe status of nameAclGroupTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.2.1.6
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ipStandardAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ipStandardAclTable'
config ip Standard Acl
ipStandardAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1
ip standard Table's Entry
Column Syntax OID
ipStandardIndexThe index of ip-standard-acl group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.1
ipStandardSubIndexThe index of ip-standard-acl rule.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.2
ipStandardPriorityThe priority of standard ip acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.3
ipStandardActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.4
ipStandardSrcIpSource IP-address of basic acl rule.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.5
ipStandardSrcIpWildSource IP-address wild of basic acl rule.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.6
ipStandardStatusstatus of the ipStandardAclTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.3.1.7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4 · 1 row entry · 17 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ipExternAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ipExternAclTable'
ip extern Acl Table
ipExternAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1
ip extern Table's Entry
Column Syntax OID
ipExternIndexThe index of ip-Extern-acl group .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.1
ipExternSubIndexThe index of ip-Extern-acl rule .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.2
ipExternPriorityThe priority of extern ip acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.3
ipExternActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.4
ipExternProtocalThe protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet.

For example :
0 is IP, 1 is ICMP, 2 is IGMP, 4…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.5
ipExternSrcIpSource IP-address of advanced acl rule,for example 10.1.1.0 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.6
ipExternSrcIpWildSource IP-address wild of advanced acl rule,for example 0.0.0.255 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.7
ipExternDstIpDestination IP-address of advanced acl rule,for example 10.1.1.0 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.8
ipExternDstIpWildDestination IP-address wild of advanced acl rule,for example 0.0.0.255 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.9
ipExternTimeRangeNameThe Time-range of advanced acl rule.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.10
ipExternSrcOpIndicates how a packet's source TCP/UDP port number is
to be compared.

If the numIpExternProtocol object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot be c…
Enumerationr/w
Enumerated Values:
0noOperator
1eq
2range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.11
ipExternSrcPort1The source port number of the TCP or UDP protocol. If the
numIpExternSrcOP object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if numIpExt…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.12
ipExternSrcPort2The source port number of the TCP or UDP protocol. If the
numIpExternSrcOP object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if numIpExter…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.13
ipExternDstOpIndicates how a packet's Destination TCP/UDP port number is
to be compared.

If the numIpExternProtocol object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot…
Enumerationr/w
Enumerated Values:
0noOperator
1eq
2range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.14
ipExternDstPort1The source port number of the TCP or UDP protocol. If the
numIpExternDestOP object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if numIpEx…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.15
ipExternDstPort2The source port number of the TCP or UDP protocol. If the
numIpExternDestOP object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if numIpExte…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.16
ipExternStatusnow state of the access-list.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.4.1.17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk macStandardAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::macStandardAclTable'
mac Standard Acl Table
macStandardAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1
mac standard Table's Entry
Column Syntax OID
macStandardIndexThe index of mac-standard-acl group .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.1
macStandardSubIndexThe index of mac-standard-acl rule .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.2
macStandardPriorityThe priority of standard mac acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.3
macStandardActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.4
macStandardSrcMacSource Mac-address of basic acl rule,for example : ff-ff-ff-ff-ff-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.5
macStandardSrcMacWildSource Mac-address's anti-mask of basic acl rule,for example : ff-ff-ff-ff-00-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.6
macStandardStatusstatus of the access-list.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.5.1.7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6 · 1 row entry · 16 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk macExternAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::macExternAclTable'
mac extern Acl Table
macExternAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1
mac extern Table's Entry
Column Syntax OID
macExternIndexThe index of Mac-Extern-acl group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.1
macExternSubIndexThe index of Mac-Extern-acl rule.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.2
macExternPriorityThe priority of extern mac acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.3
macExternActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.4
macExternSrcMacSource Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.5
macExternSrcMacWildSource Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.6
macExternDstMacDestination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.7
macExternDstMacWildDestination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.8
macExternPacketTypeIndicates the message type of packets.none(0),untagged-eth2(1),
untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.9
macExternEtherTypeValue of the ethertypeInteger32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.10
macExternEtherTypeWildAnti-mask of the ethertypeInteger32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.11
macExternCosvalue of the cosInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.12
macExternCosWildAnti-mask of the cosInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.13
macExternVlanIdvlan idInteger32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.14
macExternVlanIdWildAnti-mask of the vlan idInteger32r/w
Constraints:
range: 0-4095
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.15
macExternStatusnow state of the access-list.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.6.1.16
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ipv6StandardAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ipv6StandardAclTable'
ipv6 Standard Acl Table
ipv6StandardAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1
ipv6 standard Table's Entry
Column Syntax OID
ipv6StandardIndexThe index of ipv6-standard-acl group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.1
ipv6StandardSubIndexThe index of ipv6-standard-acl rule.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.2
ipv6StandardPriorityThe priority of standard ipv6 acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.3
ipv6StandardActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.4
ipv6StandardSrcIpSource IPV6-address of basic acl rule,for example : 3ffe:506::100.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.5
ipv6StandardSrcPrefixLenSource IPV6-address prefix length of basic acl rule.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.6
ipv6StandardStatusnow state of the access-list.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.7.1.7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8 · 1 row entry · 17 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ipv6ExternAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ipv6ExternAclTable'
ipv6 extern Acl Table
ipv6ExternAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1
ipv6 extern Table's Entry
Column Syntax OID
ipv6ExternIndexThe index of ipv6-Extern-acl group .SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.1
ipv6ExternSubIndexThe index of ipv6-Extern-acl rule .SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.2
ipv6ExternPriorityThe priority of extern ipv6 acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.3
ipv6ExternActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.4
ipv6ExternProtocalThe protocol number field in the IP header used to indicate
the higher layer protocol as specified .

For example :
0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation,
6 is TCP, 9 is IGRP, 17 is …
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.5
ipv6ExternSrcIpSource IPV6-address of advanced acl rule,for example : 3ffe:506::100.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.6
ipv6ExternSrcPreLenSource IP-address prefix length of advanced acl rule.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.7
ipv6ExternDstIpDestination IPV6-address of advanced acl rule,for example : 3ffe:506::100.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.8
ipv6ExternDstPreLenDestination IPV6-address prefix length of advanced acl rule.Integer32r/w
Constraints:
range: 0-128
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.9
ipv6ExternTimeRangeNameThe Time-range of advanced acl rule.DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.10
ipv6ExternSrcOpIndicates how a packet's source TCP/UDP port number is
to be compared.

If the ipv6ExternProtocal object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot be c…
Enumerationr/w
Enumerated Values:
0noOperator
3eq
5range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.11
ipv6ExternSrcPort1The source port number of the TCP or UDP protocol. If the
ipv6ExternSrcOp object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if ipv6Exter…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.12
ipv6ExternSrcPort2The source port number of the TCP or UDP protocol. If the
ipv6ExternSrcOp object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if ipv6ExternS…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.13
ipv6ExternDstOpIndicates how a packet's Destination TCP/UDP port number is
to be compared.

If the ipv6ExternProtocal object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot …
Enumerationr/w
Enumerated Values:
0noOperator
3eq
5range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.14
ipv6ExternDstPort1The Destination port number of the TCP or UDP protocol. If the
ipv6ExternDstOp object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if ipv6…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.15
ipv6ExternDstPort2The Destination port number of the TCP or UDP protocol. If the
ipv6ExternDstOp object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if ipv6Ex…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.16
ipv6ExternStatusstatus of ipv6ExternAclTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.8.1.17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9 · 1 row entry · 23 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk macIpExternAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::macIpExternAclTable'
mac-ip extern Acl Table
macIpExternAclEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1
mac-ip extern Table's Entry
Column Syntax OID
macIpExternIndexThe index of macIp-Extern-acl group .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.1
macIpExternSubIndexThe index of macIp-Extern-acl rule .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.2
macIpExternPriorityThe priority of extern macIp acl's rule,it is not supported now.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.3
macIpExternActThe action of acl rule.Enumerationr/w
Enumerated Values:
0deny
1permit
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.4
macIpExternProtocalThe protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
value of 0 matches every IP packet.

For example :
0 is IP, 1 is ICMP, 2 is IGMP, 4…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.5
macIpExternSrcMacSource Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.6
macIpExternSrcMacWildSource Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.7
macIpExternDstMacDestination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.8
macIpExternDstMacWildDestination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.9
macIpExternSrcIpSource IP-address of advanced acl rule,for example 10.1.1.0 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.10
macIpExternSrcIpWildSource IP-address wild of advanced acl rule,for example 0.0.0.255 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.11
macIpExternDstIpDestination IP-address of advanced acl rule,for example 10.1.1.0 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.12
macIpExternDstIpWildDestination IP-address wild of advanced acl rule,for example 0.0.0.255 .SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.13
macIpExternTimeRangeNameThe Time-range of advanced acl rule.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.14
macIpExternSrcOpIndicates how a packet's source TCP/UDP port number is
to be compared.

If the macIpExternProtocal object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot be c…
Enumerationr/w
Enumerated Values:
0noOperator
3eq
5range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.15
macIpExternSrcPort1The source port number of the TCP or UDP protocol. If the
macIpExternSrcOP object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if macIpExt…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.16
macIpExternSrcPort2The source port number of the TCP or UDP protocol. If the
macIpExternSrcOP object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if numIpExter…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.17
macIpExternDstOpIndicates how a packet's Destination TCP/UDP port number is
to be compared.

If the macIpExternProtocol object in the same row does not
indicate TCP or UDP, this object has to be 'noOperator(0)' and
cannot…
Enumerationr/w
Enumerated Values:
0noOperator
1eq
2range
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.18
macIpExternDstPort1The source port number of the TCP or UDP protocol. If the
macIpExternDstOP object in the same row is range(5), this
object will be the starting port number of the port range.
This object cannot be configured if macIpExt…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.19
macIpExternDstPort2The source port number of the TCP or UDP protocol. If the
macIpExternDstOP object in the same row is range(5), this
object will be the ending port number of the port range.
This object cannot be configured if numIpExter…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.20
macIpExternPrecedenceThe precedence of macIp-Extern-acl .Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.21
macIpExternTosThe tos of macIp-Extern-acl .Integer32r/w
Constraints:
range: 0-15
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.22
macIpExternStatusstate of the access-list.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.1.3.9.1.23
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk aclActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::aclActiveTable'
bind  Acl in port or vlan.
aclActiveEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1
Entry for aclActiveTable
Column Syntax OID
aclActiveBindTypepoint out the type of position of the bind-acl.Enumeration
Enumerated Values:
0port
1vlan
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.1
aclActiveIndexThe value of port id or vlan id .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.2
aclActiveTypethe type of acl.Enumeration
Enumerated Values:
1ip
2ipv6
3mac
5macIp
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.3
aclActiveDirectionthe direction of a binding acl.Enumeration
Enumerated Values:
0out
1in
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.4
aclActiveAclIndexthe value of acl index,you have configured in aclNumAccessGroupTable or aclNameAccessGroupTable.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.5
aclActiveStatisticsupport traffic statistic or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.6
aclActiveStatusaccess or delete the bind-acl.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.10.1.4.1.1.7
.1.3.6.1.4.1.7840.2.1.100.10.1.4.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk aclStatisticClearTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::aclStatisticClearTable'
clear traffic-statistic in port or vlan.
aclStatisticClearEntry row .1.3.6.1.4.1.7840.2.1.100.10.1.4.2.1
entry for aclStatisticClearTable
Column Syntax OID
aclStatisticClearBindTypepoint out the type of position of the bind-acl.Enumeration
Enumerated Values:
0port
1vlan
.1.3.6.1.4.1.7840.2.1.100.10.1.4.2.1.1
aclStatisticClearDirectionthe direction of a binding acl.Enumeration
Enumerated Values:
0out
1in
.1.3.6.1.4.1.7840.2.1.100.10.1.4.2.1.2
aclStatisticClearIndexThe value of port id or vlan id .SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.1.4.2.1.3
aclStatisticClearStatusclear the bind-acl's traffic-statistic.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.10.1.4.2.1.4

sshUseTable

table
.1.3.6.1.4.1.7840.2.1.100.10.2.5 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sshUseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sshUseTable'
The table for Secure Shell Connection.
sshUseEntry row .1.3.6.1.4.1.7840.2.1.100.10.2.5.1
The conceptual row for sshConnInfoTable.
Indexes
Column Syntax OID
sshUserIndexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.2.5.1.1
sshUserNameOctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.10.2.5.1.2
sshUserTypeEnumerationr/w
Enumerated Values:
0noCryptograph
7cryptograph
.1.3.6.1.4.1.7840.2.1.100.10.2.5.1.3
sshUserPasswordOctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.10.2.5.1.4
sshUserStatusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.2.5.1.5
.1.3.6.1.4.1.7840.2.1.100.10.2.6 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sshConnInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sshConnInfoTable'
The table for Secure Shell Connection.
sshConnInfoEntry row .1.3.6.1.4.1.7840.2.1.100.10.2.6.1
The conceptual row for sshConnInfoTable.
Indexes
Column Syntax OID
sshConnIDThe connection ID of the Secure Shell Connection.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.2.6.1.1
sshConnVersionThe SSH version.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.2.6.1.2
sshConnStatusThe SSH connection State. negotiationStart(1) mean the
SSH is in its negotiation start state, authenticationStart(2)
mean the SSH is in authentication start state, sessionStart(3)
mean the SSH is in session start State.
Enumeration
Enumerated Values:
1negotiationStart
2authenticationStart
3sessionStart
.1.3.6.1.4.1.7840.2.1.100.10.2.6.1.3
sshConnUserNameUser Name.DisplayString.1.3.6.1.4.1.7840.2.1.100.10.2.6.1.4
.1.3.6.1.4.1.7840.2.1.100.10.3.1 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk tacacsServerHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::tacacsServerHostTable'
IP address of TACACS server.
tacacsServerHostEntry row .1.3.6.1.4.1.7840.2.1.100.10.3.1.1
Column Syntax OID
tacacsServerHostIndexIP address of TACACS server.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.1
tacacsServerHostIPIP address of TACACS server.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.2
tacacsServerHostPortPort of TACACS server.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.3
tacacsServerHostPrimaryEnumerationr/w
Enumerated Values:
0noPrimary
1primary
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.4
tacacsServerHostStatusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.5
tacacsServerHostKeyKey for TACACS. Input space(' ') to clear this keyOctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.6
tacacsServerHostTimeoutThe time before retransmit of the TACACS server.Integer32r/w
Constraints:
range: 0-60
.1.3.6.1.4.1.7840.2.1.100.10.3.1.1.7
.1.3.6.1.4.1.7840.2.1.100.10.4.2 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk amPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::amPortInfoTable'
Access Management information list of port.
amPortInfoEntry row .1.3.6.1.4.1.7840.2.1.100.10.4.2.1
Column Syntax OID
amPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.1
amPortEnableEnable or disable the Access Management on the port.Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.2
amPortForwardingTypeAccess Management forwarding type.Enumerationr/w
Enumerated Values:
1ip-pool
2mac-ip-pool
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.3
amPortIpIP address of Access Management.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.4
amPortMacMac address of Access Management.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.5
amPortCountSeriate IP address number.Integer32r/w
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.6
amPortStatusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.4.2.1.7
.1.3.6.1.4.1.7840.2.1.100.10.5.5 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk radiusAuthenServerHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::radiusAuthenServerHostTable'
Configuration items and information list of RADIUS authentication server host.
radiusAuthenServerHostEntry row .1.3.6.1.4.1.7840.2.1.100.10.5.5.1
Column Syntax OID
radiusAuthenServerHostIndexIndex of RADIUS authentication server.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.1
radiusAuthenServerHostIPIP address of RADIUS authentication server.OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.2
radiusAuthenServerHostPortPort of RADIUS authentication server.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.3
radiusAutServerHostKeyKey for RADIUS authentication server. Input space(' ') to clear this keyOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.4
radiusAuthenServerHostPrimaryConfiguration of primary or not primaryEnumerationr/w
Enumerated Values:
0noPrimary
1primary
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.5
radiusAutServerHostAccessModeConfiguration access mode of none, dot1x or telnetEnumerationr/w
Enumerated Values:
0none
1dot1x
2telnet
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.6
radiusAuthenServerHostStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.5.5.1.7
.1.3.6.1.4.1.7840.2.1.100.10.5.6 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk radiusAcctServerHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::radiusAcctServerHostTable'
Configuration items and information list of RADIUS accounting server host.
radiusAcctServerHostEntry row .1.3.6.1.4.1.7840.2.1.100.10.5.6.1
Column Syntax OID
radiusAcctServerHostIndexIndex of RADIUS accounting server.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.1
radiusAcctServerHostIPIP address of RADIUS accounting server.OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.2
radiusAcctServerHostPortPort of RADIUS accounting server.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.3
radiusAcctServerHostKeyKey for RADIUS accounting server. Input space(' ') to clear this keyOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.4
radiusAcctServerHostPrimaryConfiguration of primary or not primaryEnumerationr/w
Enumerated Values:
0noPrimary
1primary
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.5
radiusAcctServerHostStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.10.5.6.1.6

qosPortTable

table
.1.3.6.1.4.1.7840.2.1.100.11.1.2 · 1 row entry · 8 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosPortTable'
qos port configration.
qosPortEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.2.1
qos port list of concrete definition.index is port index
Indexes
Column Syntax OID
qosPortIndexport IndexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.1
qosPortTypethe relation between qosPortType and CLI:
1 mls qos cos {<default-cos> };
0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] [pass-through-dscp]| ip-precedence [pass-through-cos] […
Enumerationr/w
Enumerated Values:
0trust
1cos
2dscpMutation
3priorityQueueOut
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.2
qosPortCosport default cos valueInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.3
qosPortTrustConfigure port trust.
priority(0),mls qos trust port priority <cos>;
priAndPassThroughDscp(1),opposite cli is mls qos trust port priority <cos> pass-through-dscp;
priAndPassThroughCos(2),opposite cli is mls qos trust po…
Enumerationr/w
Enumerated Values:
0priority
1priAndPassThroughDscp
2priAndPassThroughCos
3priAndPassThroughCosAndPassThroughDscp
4cos
5cosAndPassThroughDscp
6cosAndPassThroughCos
7cosAndPassThroughCosAndPassThroughDscp
8dscp
9dscpAndPassThroughCos
10dscpAndPassThroughDscp
11dscpAndPassThroughDscpAndPassThroughCos
12ipPrecedence
13ipPreAndPassThroughCos
14ipPreAndPassThroughDSCP
15ipPreAndPassThroughDSCPAndPassThroughCos
16mplsEXP
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.4
qosPortPriorityThe corresponding CLI:mls qos trust port priority <cos>.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.5
qosPortMutationconfigure port of dscp-mutation,opposite cli 'mls qos dscp-mutation <dscp-mutation-name>'DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.6
qosPortQueuepriorityQueue configure queue out method to strict priority-queue method;
wrrQueue restores the default wrr queue out method.
Enumerationr/w
Enumerated Values:
0priorityQueue
1wrrQueue
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.7
qosPortStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.2.1.8
.1.3.6.1.4.1.7840.2.1.100.11.1.3 · 1 row entry · 12 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosClassMapTable'
classmap configure list
qosclassmapEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.3.1
about classmap list of concrete definition,index is classmapname.
Indexes
Column Syntax OID
qosClassMapNameclassmap nameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.1
qosClassMapType0 class-map <class-map-name>,index is classmapname;
1 match access-group <acl-index-or-name>,need qosClassMapAccessGroup cooperation;
2 match ip dscp <dscp-list> qosClassMapDscp ;
3 match ip precedence <ip-precedence…
Enumerationr/w
Enumerated Values:
0configurClassMap
1accessGroup
2dscp
3ippre
4vlan
5v6dscp
7v6Flow
8v6AccessGroup
9cos
10exptopmost
.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.2
qosClassMapAccessGroupMatch specify access-group (name or number).
This object be configured only if qosClassMapType
in the same row is accessGroup(1).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.3
qosClassMapDscpMatch specify Dscp.
This object be configured only if qosClassMapType
in the same row is dscp(2).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.4
qosClassMapV6DscpMatch specify ipv6 Dscp.
This object be configured only if qosClassMapType
in the same row is v6dscp(5).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.5
qosClassMapIpPreMatch specify Ip Precedence.
This object be configured only if qosClassMapType
in the same row is ippre(3).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.6
qosClassMapV6AccGroupMatch specify Ipv6 Access-Group.
This object be configured only if qosClassMapType
in the same row is v6AccessGroup(8).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.7
qosClassMapV6FlowMatch specify Ipv6 Flowlabel.
This object be configured only if qosClassMapType
in the same row is v6Flow(6).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.8
qosClassMapVlanMatch specify Vlan list . At most 8 vlan id.
This object be configured only if qosClassMapType
in the same row is vlan(4).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.9
qosClassCosMatch specify Cos .
This object be configured only if qosClassMapType
in the same row is cos(9).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.10
qosClassMapEXPtopmostMatch specify MPLS EXP.
This object be configured only if qosClassMapType
in the same row is EXPtopmost(10).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.11
qosClassMapStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.3.1.12
.1.3.6.1.4.1.7840.2.1.100.11.1.4 · 1 row entry · 13 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosPolicyTable'
qos policy list
qosPolicyEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.4.1
qos policy list of definition,index is qos policy and classmap of name
Indexes
Column Syntax OID
qosPolicyNameQoS Policy nameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.1
qosPolicyClassMapSpecify the classmap name.After a policy map is created, it can be associated to a class.
So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then
setting the qosPolicyStatus …
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.2
qosPolicyTypethe relation between qosPolicyType and CLI:
0 policy-map <policy-map-name>;
1 class <class-map-name>;
2 police <rate-kbps> <burst-kbyte> [exceed-action {drop | policed-dscp-transmit}];
3 police aggregate <aggregate-…
Enumerationr/w
Enumerated Values:
0policymap
1matchclassmap
2sp
3aggregatePolicer
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.3
qosPolicyRateKbpsRate Bandwidth of one policymap.
This object be configured only if qosPolicyType
in the same row is sp(2).
Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.4
qosPolicyNormalBurstKbpsNormal burst kbytes.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.5
qosPolicyMaximumBurstKbpsMaximum burst kbytes.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.6
qosPolicyPeakKbpsPeak information rate.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.7
qosPolicyConformActionconform-action transmit means send packets without any change when specified speed is not exceeded;
conform-action drop means drop packets when specified speed is not exceeded;
conform-action set-dscp-transmit specifies…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2set-dscp-transmit
3set-prec-transmit
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.8
qosPolicyConformActionChangeValueIf conform-action is set-dscp-transmit(2),the value is between 0-63;
else if conform-action is set-prec-transmit(2),the value is between 0-7.
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.9
qosPolicyExceedActionexceed-action transmit means send packets without any change when specified speed is exceeded;
exceed-action drop means drop packets when specified speed is exceeded;
exceed-action policed-dscp-transmit specifies to mar…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2policeDscpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.10
qosPolicyViolateActionviolate-action transmit means send packets without any change when specified speed is violate;
violate-action drop means drop packets when specified speed is violate;
violate-action policed-dscp-transmit specifies to ma…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2policeDscpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.11
qosPolicyAggregatePoliceraggregate-policer-name.
This object be configured only if qosPolicyType
in the same row is aggregatePolicer(3).
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.12
qosPolicyStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.4.1.13
.1.3.6.1.4.1.7840.2.1.100.11.1.5 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosAggPolicerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosAggPolicerTable'
qos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content,
please refer to qosshow node for the running configuraton
qosAggPolicerEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.5.1
index is AggPolicer name.
Column Syntax OID
qosAggPolicerNameQoS qosAggPolicer nameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.1
qosAggPolicerRateKbpsRate Bandwidth of After the classification.Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.2
qosAggPolicerNormalBurstKbpsNormal burst kbytes.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.3
qosAggPolicerMaximumBurstKbpsMaximum burst kbytes.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.4
qosAggPolicerPeakKbpsPeak information rate.Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.5
qosAggPolicerConformActionconform-action transmit means send packets without any change when specified speed is not exceeded;
conform-action drop means drop packets when specified speed is not exceeded;
conform-action set-dscp-transmit specifies…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2set-dscp-transmit
3set-prec-transmit
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.6
qosAggPolicerConformActionChangeValueIf conform-action is set-dscp-transmit(2),the value is between 0-63;
else if conform-action is set-prec-transmit(2),the value is between 0-7.
Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.7
qosAggPolicerExceedActionexceed-action transmit means send packets without any change when specified speed is exceeded;
exceed-action drop means drop packets when specified speed is exceeded;
exceed-action policed-dscp-transmit specifies to mar…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2policeDscpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.8
qosAggPolicerViolateActionviolate-action transmit means send packets without any change when specified speed is violate;
violate-action drop means drop packets when specified speed is violate;
violate-action policed-dscp-transmit specifies to ma…
Enumerationr/w
Enumerated Values:
0transmit
1drop
2policeDscpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.9
qosAggPolicerStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.5.1.10

qosSetTable

table
.1.3.6.1.4.1.7840.2.1.100.11.1.6 · 1 row entry · 12 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosSetTable'
remark new dscp or ip precedence for classified flow
qosSetEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.6.1
qosSetTable list of acce index policyname and classmap name.
Column Syntax OID
qosSetPolicyMapNameQoS Policy nameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.1
qosSetClassMapNameQoS class map nameOctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.2
qosSetTypeqosSetType range:1,2,3,4,5,6,7,8,9
1 dscp Set IP DSCP (DiffServ CodePoints);
2 precedence Set IP precedence;
3 nexthop Set IP nexthop;
4 dscp Set IPv6 DSCP (DiffServ CodePoints);
6 flowl…
Enumerationr/w
Enumerated Values:
1dscp
2precedence
3nextHop
4v6Dscp
6v6FlowLabel
7v6nextHop
8cos
9expimposition
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.3
qosSetdscpremark dscp for the classified flowInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.4
qosSetprecedenceremark ip precedence for classified flowInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.5
qosSetnextHopset nexthop for classified flowSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.6
qosSetv6Dscpremark ipv6 dscp for classified flowInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.7
qosSetv6FlowLabelremark ipv6 flow lable for classified flowInteger32r/w
Constraints:
range: 0-1048575
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.8
qosSetv6nextHopset IPv6 nexthop for classified flowDisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.9
qosSetCosremark cos for classified flowInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.10
qosSetEXPimpositionremark MPLS EXP value for classified flowInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.11
qosSetStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.6.1.12
.1.3.6.1.4.1.7840.2.1.100.11.1.7 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosPortBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosPortBindTable'
Apply a policy map to the specified port.
qosPortBindEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.7.1
the index of this entry is port-index and policy-map
Column Syntax OID
qosPortBindIndexQoS Port IndexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.7.1.1
qosPortBindPolicyQoS Policy nameOctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.11.1.7.1.2
qosPortBindTypeinput(1),bind the policy-map to ingress port;
output(2),bind the policy-map to egress port;
noinput(3),unbind the policy-map to ingress port;
nooutput(4), unbind the policy-map to egress port
Enumerationr/w
Enumerated Values:
1input
2output
3noinput
4nooutput
.1.3.6.1.4.1.7840.2.1.100.11.1.7.1.3
.1.3.6.1.4.1.7840.2.1.100.11.1.8 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qosPortQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qosPortQueueTable'
set golbal qos WRR weight
qosPortQueueEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.8.1
set port qos WRR weight,index is port index.
Column Syntax OID
qosPortQueueIndexQoS Port IndexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.1
qosPortQueueWeight1WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.2
qosPortQueueWeight2WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.3
qosPortQueueWeight3WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.4
qosPortQueueWeight4WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.5
qosPortQueueWeight5WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.6
qosPortQueueWeight6WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.7
qosPortQueueWeight7WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.8
qosPortQueueWeight8WRR weight,range is 0~15.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.9
qosPortQueueStatusSetting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.1.8.1.10
.1.3.6.1.4.1.7840.2.1.100.11.1.11.1 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk showclassmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::showclassmapTable'
show class map table
showclassmapEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.11.1.1
show class map entry
Column Syntax OID
showclassmapnameclassmap nameOctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.11.1.11.1.1.1
showclassmapmatchone item classmap match ruleOctetString
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.11.1.11.1.1.2
.1.3.6.1.4.1.7840.2.1.100.11.1.11.2 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk showpolicymapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::showpolicymapTable'
show policy list
showpolicymapEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.11.2.1
policy map entry
Column Syntax OID
showpolicymapnamepolicy nameOctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.11.1.11.2.1.1
showpolicymapcontentthe match classmap and all defined other rulesOctetString
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.11.1.11.2.1.2
.1.3.6.1.4.1.7840.2.1.100.11.1.11.3 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk showqosaggregatepolicerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::showqosaggregatepolicerTable'
display aggregatepolicer list
showqosaggregatepolicerEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.11.3.1
aggregatepolicer entry,index is showqosaggregatepolicername
Column Syntax OID
showqosaggregatepolicernameaggregatepolicer nameOctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.11.1.11.3.1.1
showqosaggregatepolicercontentaggregatepolicer parameterOctetString
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.11.1.11.3.1.2
.1.3.6.1.4.1.7840.2.1.100.11.1.11.4 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk showmlsqosinterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::showmlsqosinterfaceTable'
show port qos configuration
showmlsqosinterfaceEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.11.4.1
showmlsqosinterfaceTable,index is port-index
Column Syntax OID
showmlsqosinterfaceIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.1.11.4.1.1
showmlsqosinterfaceqoscontentqos port configurationOctetString
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.11.1.11.4.1.2
.1.3.6.1.4.1.7840.2.1.100.11.1.11.6 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk showmlsqosmapsdscpmutationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::showmlsqosmapsdscpmutationTable'
ingress DSCP to egress DSCP map
showmlsqosmapsdscpmutationEntry row .1.3.6.1.4.1.7840.2.1.100.11.1.11.6.1
index is dscpmutationname
Column Syntax OID
showmlsqosmapsdscpmutationnamedscpmutationname.OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.11.1.11.6.1.1
showmlsqosmapsdscpmutationcontentDSCP-DSCP mapOctetString
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.11.1.11.6.1.2
.1.3.6.1.4.1.7840.2.1.100.11.2.1 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3PolicyMapGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3PolicyMapGroupTable'
this table is used for building a policy and mapping the named policy to number,
if you want to configure a policy,you must map at here.
qos3PolicyMapGroupEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.1.1
entry for policy map group.
Column Syntax OID
qos3PolicyMapGroupIndexthe range is 0-(2^64 - 1).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.1.1.1
qos3PolicyMapGroupNamethe policy nameOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.1.1.2
qos3PolicyMapGroupIsExtindicate that whether the policy used on extand field processor.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.1.1.3
qos3PolicyMapGroupStatusthe status of qos3PolicyMapGroupTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.1.1.4
.1.3.6.1.4.1.7840.2.1.100.11.2.2 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ClassMapTable'
this table is used for configuring the filter rule of qos
qos3ClassMapEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.2.1
entry for class map.
Column Syntax OID
qos3ClassMapNamethe name of classOctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.2.1.1
qos3ClassMapTypethe clss type that you want to matching.Enumerationr/w
Enumerated Values:
0cos
1dscp
2ipPrecedence
3ipv6Dscp
4ipv6Flowlabel
5exp
6vlan
7aclIndex
.1.3.6.1.4.1.7840.2.1.100.11.2.2.1.2
qos3ClassMapValuethe value of you choosed type at last node,the limits: cos <0-7> dscp <0-63> ipPrecedence<0-7> ipv6Dscp<0-63> vlan <1-4094> ipv6Flowlabel<0-1048575>
exp is not support now.except aclindex,you can config 8 parameters at…
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.2.2.1.3
qos3ClassMapUsedTimedisplay how many times the class used.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.2.1.4
qos3ClassMapStatusthe status of qos3ClassMapTable,destroy(2) will destroy the whole class-map,remove(3) just clear the value of qos3ClassMapValue.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
3remove
.1.3.6.1.4.1.7840.2.1.100.11.2.2.1.5
.1.3.6.1.4.1.7840.2.1.100.11.2.3 · 1 row entry · 24 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3AggregatePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3AggregatePolicyTable'
this table is used for configuring aggregate policy.
qos3AggregatePolicyEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.3.1
entry for aggregate policy.
Column Syntax OID
qos3AggPolicyMapNamethe name of aggregate policy.OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.1
qos3AggPolicyCIRKbpsCIR(Committed Information Rate) Kbits per second <1-10000000>Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.2
qos3AggPolicyCBSKbpsCBS(Committed Burst Size) Kbytes <1-1000000>Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.3
qos3AggPolicyPBSKbpsPBS(Peak Burst Size) Kbytes <1-1000000>Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.4
qos3AggPolicyPIRKbpsPIR(Peak Information Rate) Kbits per second <1-10000000>Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.5
qos3AggPolicyConformActionAction when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.6
qos3AggPolicyconformSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.7
qos3AggPolicyconformSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.8
qos3AggPolicyconformSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.9
qos3AggPolicyconformSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.10
qos3AggPolicyconformSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.11
qos3AggPolicyExceedActionAction when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
7policiedIntpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.12
qos3AggPolicyExceedSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.13
qos3AggPolicyExceedSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.14
qos3AggPolicyExceedSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.15
qos3AggPolicyExceedSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.16
qos3AggPolicyExceedSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.17
qos3AggPolicyViolateActionAction when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
7policiedIntpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.18
qos3AggPolicyViolateSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.19
qos3AggPolicyViolateSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.20
qos3AggPolicyViolateSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.21
qos3AggPolicyViolateSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.22
qos3AggPolicyViolateSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.23
qos3AggPolicyStatusthe status of qos3AggregatePolicyTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.3.1.24
.1.3.6.1.4.1.7840.2.1.100.11.2.4 · 1 row entry · 48 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3PolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3PolicyTable'
this table is used for configuring policy
qos3PolicyEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.4.1
entry for policy.
Column Syntax OID
qos3PolicyMapIndexthe index of policy that you configured at qos3PolicyMapGroupTableSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.1
qos3PolicyClassMapNameSpecify the classmap name.After a policy map is created, it can be associated to a classOctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.2
qos3PolicyInsertClassMapNameSpecify the position of classmap nameOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.3
qos3PolicyTypepidAction means simple policy.colorAction and aggregateAction is Mutually exclusive,for example,if you
want the pidAction and colorAction become effective,you must set the value c0.
Bitsr/w
Enumerated Values:
0pidAction
1colorAction
2aggregateAction
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.4
qos3PolicyCIRKbpsCIR(Committed Information Rate) Kbits per second <1-10000000>Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.5
qos3PolicyCBSKbpsCBS(Committed Burst Size) Kbytes <1-1000000>Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.6
qos3PolicyPBSKbpsPBS(Peak Burst Size) Kbytes <1-1000000>Integer32r/w
Constraints:
range: 1-1000000
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.7
qos3PolicyPIRKbpsPIR(Peak Information Rate) Kbits per second <1-10000000>Integer32r/w
Constraints:
range: 1-10000000
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.8
qos3PolicyConformActionAction when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.9
qos3PolicyconformSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.10
qos3PolicyconformSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.11
qos3PolicyconformSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.12
qos3PolicyconformSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.13
qos3PolicyconformSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.14
qos3PolicyExceedActionAction when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
7policiedIntpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.15
qos3PolicyExceedSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.16
qos3PolicyExceedSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.17
qos3PolicyExceedSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.18
qos3PolicyExceedSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.19
qos3PolicyExceedSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.20
qos3PolicyViolateActionAction when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100).Bitsr/w
Enumerated Values:
0transmit
1drop
2cos
3dscp
4ipPrecedence
5intp
6dp
7policiedIntpTransmit
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.21
qos3PolicyViolateSetCosSet COSInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.22
qos3PolicyViolateSetDscpChange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.23
qos3PolicyViolateSetPrecChange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.24
qos3PolicyViolateSetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.25
qos3PolicyViolateSetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.26
qos3PolicyAggregatePolicerthe name of aggregate policyDisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.27
qos3PolicyAccountingenable the Counter statistics or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.28
qos3PolicyPidActionsimple policy action,for example: if you want to config cos(0) and setSTpid(10),you must set 8020 (1000 0000 0010 0000).
some network Management Software offer selections that is not correct,in RFC3417,When encoding an …
Bitsr/w
Enumerated Values:
0cos
1dscp
2ipPrecedence
3ipNextHop
4exp
5ipv6NextHop
6intp
7dp
8setCvid
9setSvid
10setSTpid
11addSvid
12delCvid
13setTunnelId
14transmit
15drop
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.29
qos3SetCosset cosInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.30
qos3SetIpDscpchange dscpInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.31
qos3SetIpPrecchange precedenceInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.32
qos3SetIntpSet Internal priorityInteger32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.33
qos3SetDpSet Drop priorityInteger32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.34
qos3SetCVidset vlan id of inner VLAN tag.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.35
qos3SetSVidset vlan id of outer VLAN tag.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.36
qos3SetSTpidSet S-tpidEnumerationr/w
Enumerated Values:
1value0x8100
2value0x88a8
3value0x9100
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.37
qos3AddSVidadd vlan id of outer VLAN tagInteger32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.38
qos3DelCViddelete vlan id of inner VLAN tag.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.39
qos3SetTunnelIdInteger32r/w
Constraints:
range: 1-50
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.40
qos3SetIpDefaultPBRwhether add Default routing of ip type.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.41
qos3SetIpVrfset the vrf of ip typeInteger32r/w
Constraints:
range: 0-252
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.42
qos3SetIpNextHopset Nexthop IP address.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.43
qos3SetExpset exp.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.44
qos3SetIpv6DefaultPBRwhether add Default routing of ipv6 typeEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.45
qos3SetIpv6Vrfset the vrf of ipv6 type.Integer32r/w
Constraints:
range: 0-252
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.46
qos3SetIpv6NextHopset Nexthop IPv6 addressOctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.47
qos3PolicyStatusthe status of qos3PolicyTable. destroy(2) will put off the class-map,removeColorAct(3) will clear the color-act,
removeAggregateAct(4) will clear the aggregate-act,removePidAct(5) will clear the value while you set int …
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
3removeColorAct
4removeAggregateAct
5removePidAct
.1.3.6.1.4.1.7840.2.1.100.11.2.4.1.48
.1.3.6.1.4.1.7840.2.1.100.11.2.5 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3PortTable'
qos port configration.
qos3PortEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.5.1
entry for port configuration of qos about trust,cos value,queue drop-algorithm and queue algorithm.
Indexes
Column Syntax OID
qos3PortIndexport index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.1
qos3PortCosset default cos of the port.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.2
qos3PortTrustset port trust. cosEnable,dscpEnable and expEnable can be set at the same time;cosDisable,dscpDisable and expDisbable can be set at the same time;
cosEnable,dscpEnable and expEnable can not be set at the same time with …
Bitsr/w
Enumerated Values:
0cosEnable
1dscpEnable
2expEnable
3cosDisable
4dscpDisable
5expDisbable
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.3
qos3PortWredEnableset the drop Algorithm of port's queue.Enumerationr/w
Enumerated Values:
0tail
1wred
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.4
qos3PortQueueAlgorithmeffected the weight Algorithm of port's queue.Enumerationr/w
Enumerated Values:
0sp
1wrr
2wdrr
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.5
qos3PortPassThroughCosforbid changing the value of cos.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.6
qos3PortPassThroughDscpforbid changing the value of dscp.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.5.1.7
.1.3.6.1.4.1.7840.2.1.100.11.2.6 · 1 row entry · 11 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3QueueWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3QueueWeightTable'
this table is used for configuring port's weight
qos3QueueWeightEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.6.1
entry for queue weight configuration.
Column Syntax OID
qos3QueueWeightPortIndexport index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.1
qos3QueueWeightTypechoose the algorithm weight that you want to set.Enumeration
Enumerated Values:
0wrr
1wdrr
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.2
qos3QueueWeight0wrr default value is 1,wdrr default value is 10.Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.3
qos3QueueWeight1wrr default value is 2,wdrr default value is 20Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.4
qos3QueueWeight2wrr default value is 3,wdrr default value is 40Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.5
qos3QueueWeight3wrr default value is 4,wdrr default value is 80Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.6
qos3QueueWeight4wrr default value is 5,wdrr default value is 160Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.7
qos3QueueWeight5wrr default value is 6,wdrr default value is 320Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.8
qos3QueueWeight6wrr default value is 7,wdrr default value is 640Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.9
qos3QueueWeight7wrr default value is 8,wdrr default value is 1280Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.10
qos3QueueWeightStatusthe status of qos3QueueWeightTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.6.1.11
.1.3.6.1.4.1.7840.2.1.100.11.2.7 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3QueueBindWidthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3QueueBindWidthTable'
this table is used for setting bindwidth of port.
qos3QueueBindWidthEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.7.1
entry for Queue BindWidth configuration.
Column Syntax OID
qos3QueueBindWidthPortIndexport index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.7.1.1
qos3QueueBindWidthQueueIdqueue idInteger32
Constraints:
range: 1-8
.1.3.6.1.4.1.7840.2.1.100.11.2.7.1.2
qos3QueueBindWidthMinthe Smallest bindwidth.Integer32r/w
Constraints:
range: 0-128000
.1.3.6.1.4.1.7840.2.1.100.11.2.7.1.3
qos3QueueBindWidthMaxthe Largest bindwidth.Integer32r/w
Constraints:
range: 0-128000
.1.3.6.1.4.1.7840.2.1.100.11.2.7.1.4
qos3QueueBindWidthStatusthe status of qos3QueueBindWidthTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.7.1.5
.1.3.6.1.4.1.7840.2.1.100.11.2.8 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3QueueWredTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3QueueWredTable'
this table is used for configuring the drop Algorithm of queue
qos3QueueWredEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.8.1
entry for queue wred configuration.
Column Syntax OID
qos3QueueWredPortIndexport index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.1
qos3QueueWredQueueIdqueue id.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.2
qos3QueueWredDpdrop Priority.Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.3
qos3QueueWredDpStartthe smallist queue length when the queue start Discard packet.Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.4
qos3QueueWredDpEndthe Largest queue length when the queue start Discard packetInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.5
qos3QueueWredDpMaxRatethe max Discard ProbabilityInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.6
qos3QueueWredStatusthe status of qos3QueueWredEntryEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.8.1.7

qos3MapTable

table
.1.3.6.1.4.1.7840.2.1.100.11.2.9 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3MapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3MapTable'
this table is used for setting map between priorities(eg:cos,intp).
qos3MapEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.9.1
entry for mls qos map configuration.
Indexes
Column Syntax OID
qos3MapTypethe type of map,if the range of intp value beyonds 0-7,please config it in qos3MapIntpExtendTable.Enumeration
Enumerated Values:
0cosToIntp
1cosToDp
2expToIntp
3expToDp
4intpToCos
5intpToDscp
6intpToExp
7cosToCosGreen
8cosToCosYellow
9cosToCosRed
10cosToDscpGreen
11cosToDscpYellow
12cosToDscpRed
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.1
qos3MapAtoB1according to maptype,map a to b for the first value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.2
qos3MapAtoB2according to maptype,map a to b for the second value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.3
qos3MapAtoB3according to maptype,map a to b for the third value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.4
qos3MapAtoB4according to maptype,map a to b for the fourth value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.5
qos3MapAtoB5according to maptype,map a to b for the fifth value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.6
qos3MapAtoB6according to maptype,map a to b for the sixth value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.7
qos3MapAtoB7according to maptype,map a to b for the seventh value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.8
qos3MapAtoB8according to maptype,map a to b for the eighth value.Integer32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.9
qos3MapStatusthe status of qos3MapTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.9.1.10
.1.3.6.1.4.1.7840.2.1.100.11.2.10 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3MapDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3MapDscpTable'
this table is used for mapping between dscp and other priorities.
qos3MapDscpEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.10.1
entry for mls qos dscp map configuration.
Column Syntax OID
qos3MapDscpTypethe type of mapEnumeration
Enumerated Values:
0dscpToIntp
1dscpToDp
2dscpToDscp
3dscpToDscpGreen
4dscpToDscpYellow
5dscpToDscpRed
6dscpToCosGreen
7dscpToCosYellow
8dscpToCosRed
.1.3.6.1.4.1.7840.2.1.100.11.2.10.1.1
qos3MapDscpIndexthe index of dscpInteger32
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.10.1.2
qos3MapDscpValuethe map valueInteger32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.11.2.10.1.3
qos3mapDscpStatusthe status of qos3MapDscpTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.10.1.4
.1.3.6.1.4.1.7840.2.1.100.11.2.11 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ServicePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ServicePolicyTable'
bind the policy to port or vlan.
qos3ServicePolicyEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.11.1
entry for qos bind.
Column Syntax OID
qos3ServicePolicyBindTypebind the policy to port or vlanEnumeration
Enumerated Values:
0port
1vlan
.1.3.6.1.4.1.7840.2.1.100.11.2.11.1.1
qos3ServicePolicyIndexport index or vlan idSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.11.1.2
qos3ServicePolicyDirectionthe direction of bindingEnumeration
Enumerated Values:
0out
1in
2ext
.1.3.6.1.4.1.7840.2.1.100.11.2.11.1.3
qos3ServicePolicyNamethe policy nameOctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.11.1.4
qos3SercivePolicyStatusthe status of qos3ServicePolicyTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.11.1.5
.1.3.6.1.4.1.7840.2.1.100.11.2.12 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3StatisticClearTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3StatisticClearTable'
this table is used for clearing counter statistics
qos3StatisticClearEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.12.1
entry for clear statistics of vlan or port.
Column Syntax OID
qos3StatisticClearBindTypebind to port or vlanEnumeration
Enumerated Values:
0port
1vlan
.1.3.6.1.4.1.7840.2.1.100.11.2.12.1.1
qos3StatisticClearIndexport index or vlan idSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.12.1.2
qos3StatisticClearDirectionthe direction that you want to clearEnumeration
Enumerated Values:
0out
1in
.1.3.6.1.4.1.7840.2.1.100.11.2.12.1.3
qos3StatisticClearStatusthe status of qos3StatisticClearTableEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.12.1.4

qos3EtsTable

table
.1.3.6.1.4.1.7840.2.1.100.11.2.13.1 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3EtsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3EtsTable'
this table is used for enabling QOS ETS and MC_UC mode.
qos3EtsEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.1.1
entry for enabling ETS and MC_UC.
Column Syntax OID
qos3EtsPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.1.1.1
qos3EtsScheduleStatusConfigconfig schedule mode.Enumerationr/w
Enumerated Values:
0normal
1uc
2mc
3ets
.1.3.6.1.4.1.7840.2.1.100.11.2.13.1.1.2
qos3EtsStatusthe status of qos3EtsTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.1.1.3
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3McQueueBindWidthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3McQueueBindWidthTable'
a list of mc bindWidth configuration.
qos3McQueueBindWidthEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1
entry for configuring mc bindWidth.
Column Syntax OID
qos3McQueueBindWidthPortIndexport indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1.1
qos3McQueueIDqueue index.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1.2
qos3McQueueBindWidthMinminimize vaule of queue bindWidthInteger32r/w
Constraints:
range: 0-128000
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1.3
qos3McQueueBindWidthMaxmaximize value of queue bindWidth.Integer32r/w
Constraints:
range: 0-128000
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1.4
qos3McQueueBindWidthStatusthe status of qos3McQueueBindWidthTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.2.1.5
.1.3.6.1.4.1.7840.2.1.100.11.2.13.3 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3SchedulePolicyMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3SchedulePolicyMapTable'
this table is used for building a Schedule policy and mapping the named policy to number, if you want to configure a Schedule policy,you must map at here.
qos3SchedulePolicyMapEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.3.1
entry for building schedule policy.
Column Syntax OID
qos3SchedulePolicyMapIndexthe range is 0-(2^64 - 1).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.3.1.1
qos3SchedulePolicyNamethe schedule policy name.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.13.3.1.2
qos3SchedulePolicyStatusthe status of qos3SchedulePolicyGroupTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.13.3.1.3
.1.3.6.1.4.1.7840.2.1.100.11.2.13.4 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3NodeScheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3NodeScheduleTable'
this table is used for building a Schedule node.
qos3NodeScheduleEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.4.1
entry for building schedule policy.
Column Syntax OID
qos3NodeSchedulePolicyIndexpolicy index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.4.1.1
qos3NodeScheduleLevelIDlevel ID.Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.7840.2.1.100.11.2.13.4.1.2
qos3NodeScheduleNodeIDnode ID. range of it's value is determined by level ID,for level 1,it can only be 1;
for level 2 and level 3,the range is 1-4.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.11.2.13.4.1.3
qos3NodeScheduleStatusthe status of qos3NodeScheduleTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.13.4.1.4
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ScheduleQueueAlgorithmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ScheduleQueueAlgorithmTable'
this table is used for schedule queue algorithm configuration.
qos3ScheduleQueueAlgorithmEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1
entry for configuring schedule queue algorithm.
Column Syntax OID
qos3ScheduleQueueAlgorithmPolicyIndexschedule policy map Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1.1
qos3ScheduleQueueAlgorithmLevelIDlevel ID.Integer32
Constraints:
range: 1-3
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1.2
qos3ScheduleQueueAlgorithmNodeIDnode ID. range of it's value is determined by level ID,for level 1,it can only be 1;
for level 2 and level 3,the range is 1-4.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1.3
qos3ScheduleQueueAlgorithmConfigschedule queue algorithm.Enumerationr/w
Enumerated Values:
0rr
1sp
2wrr
3wdrr
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1.4
qos3ScheduleQueueAlgorithmStatusthe status of qos3ScheduleQueueAlgorithmTable.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.13.5.1.5
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ScheduleQueueWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ScheduleQueueWeightTable'
this table is used for schedule queue weight configuration.
Column Syntax OID
qos3ScheduleQueueWeightPolicyIndexschedule policy map Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.1
qos3ScheduleQueueWeightLevelIDlevel ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.2
qos3ScheduleQueueWeightNodeIDnode ID. range of it's value is determined by level ID,for level 1,it can only be 1;
for level 2 and level 3,the range is 1-4.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.3
qos3ScheduleQueueAlgorithmqueue algorithm.Enumeration
Enumerated Values:
0wrr
1wdrr
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.4
qos3ScheduleQueueWeightQueueIDqueue ID.Integer32
Constraints:
range: 0-18
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.5
qos3ScheduleQueueWeightValuequeue weight value.Integer32r/w
Constraints:
range: 0-32767
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.6
qos3ScheduleQueueWeightStatusthe status of qos3ScheduleQueueWeightTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.6.1.7
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ScheduleQueueInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ScheduleQueueInputTable'
this table is used for schedule queue input configuration.
qos3ScheduleQueueInputEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1
entry for configuring schedule queue input.
Column Syntax OID
qos3ScheduleQueueInputPolicyIndexschedule policy map Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.1
qos3ScheduleQueueInputLevelIDlevel ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.2
qos3ScheduleQueueInputNodeIDnode ID. range of it's value is determined by level ID,for level 1,it can only be 1;
for level 2 and level 3,the range is 1-4.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.3
qos3ScheduleQueueInputQueueIDqueue ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.4
qos3ScheduleQueueInputTypeinput type of queue.Enumerationr/w
Enumerated Values:
0uc
1mc
2node
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.5
qos3ScheduleQueueInputTypeValuevalue of the input type,the value range for uc is 1-18,the value range for mc is 1-4,the value range for node is 1-4.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.6
qos3ScheduleQueueInputStatusthe status of qos3ScheduleBindWidthTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.7.1.7
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3ScheduleBindWidthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3ScheduleBindWidthTable'
this table is used for schedule bindWidth configuration.
qos3ScheduleBindWidthEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1
entry for configuring schedule bindWidth.
Column Syntax OID
qos3ScheduleBindWidthPolicyIndexschedule policy map Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.1
qos3ScheduleBindWidthLevelIDlevel ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.2
qos3ScheduleBindWidthNodeIDnode ID. range of it's value is determined by level ID,for level 1,it can only be 1;
for level 2 and level 3,the range is 1-4.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.3
qos3ScheduleBindWidthMinminimize value of schedule bindWidth.Integer32r/w
Constraints:
range: 0-12800
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.4
qos3ScheduleBindWidthMaxmaximize value of schedule bindWidth.Integer32r/w
Constraints:
range: 0-12800
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.5
qos3ScheduleBindWidthStatusthe status of qos3ScheduleBindWidthTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.8.1.6
.1.3.6.1.4.1.7840.2.1.100.11.2.13.9 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3SchedulePolicyBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3SchedulePolicyBindTable'
this table is used for binding schedule policy to port.
qos3SchedulePolicyBindEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.13.9.1
entry for binding schedule policy.
Column Syntax OID
qos3SchedulePolicyBindPortIndexport Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.11.2.13.9.1.1
qos3SchedulePolicyBindPolicyNamethe schedule policy name.OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.11.2.13.9.1.2
qos3SchedulePolicyBindStatusthe status of qos3SchedulePolicyBindTable.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.11.2.13.9.1.3
.1.3.6.1.4.1.7840.2.1.100.11.2.14 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos3MapIntpExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos3MapIntpExtendTable'
this table is used for mapping between intp and other priorities,the range of value for intp is 0-119.
qos3MapIntpExtendEntry row .1.3.6.1.4.1.7840.2.1.100.11.2.14.1
entry for mls qos intp map configuration.
Column Syntax OID
qos3MapIntpExtendTypethe type of mapEnumeration
Enumerated Values:
0intpToCos
1intpToDscp
2intpToExp
3intpToQueue
4intpToDp
5intpToIntpRed
6intpToIntpYellow
.1.3.6.1.4.1.7840.2.1.100.11.2.14.1.1
qos3MapIntpExtendIndexthe index of intpInteger32
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.14.1.2
qos3MapIntpExtendValuethe map valueInteger32r/w
Constraints:
range: 0-119
.1.3.6.1.4.1.7840.2.1.100.11.2.14.1.3
qos3mapIntpExtendStatusthe status of qos3MapIntpExtendTableEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.11.2.14.1.4
.1.3.6.1.4.1.7840.2.1.100.12.1 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorDestTable'
Destination port for mirrored packets.
mirrorDestEntry row .1.3.6.1.4.1.7840.2.1.100.12.1.1
Destination port for mirrored packets.
Column Syntax OID
mirrorDestSessionSession ID.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.12.1.1.1
mirrorDestPortmirror destination port eg:Ethernet1/1.OctetStringr/w
Constraints:
range: 1-20
.1.3.6.1.4.1.7840.2.1.100.12.1.1.2
mirrorDestStatusStatus.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.1.1.3
.1.3.6.1.4.1.7840.2.1.100.12.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorSrcPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorSrcPortTable'
Src port for mirrored packets.
mirrorSrcPortEntry row .1.3.6.1.4.1.7840.2.1.100.12.2.1
Src port for mirrored packets.
Column Syntax OID
mirrorSrcPortSessionSession ID.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.12.2.1.1
mirrorSrcPortDirectDirection of mirror.Enumeration
Enumerated Values:
1rx
2tx
.1.3.6.1.4.1.7840.2.1.100.12.2.1.2
mirrorSrcPortmirror source port. eg:Ethernet1/1.OctetStringr/w
Constraints:
range: 1-512
.1.3.6.1.4.1.7840.2.1.100.12.2.1.3
mirrorSrcPortStatusStatus.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.2.1.4
.1.3.6.1.4.1.7840.2.1.100.12.3 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorSrcCpuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorSrcCpuTable'
Src Cpu for mirrored packets.
mirrorSrcCpuEntry row .1.3.6.1.4.1.7840.2.1.100.12.3.1
Src Cpu for mirrored packets.
Column Syntax OID
mirrorSrcCpuSessionSession ID.Integer32
Constraints:
range: 4-4
.1.3.6.1.4.1.7840.2.1.100.12.3.1.1
mirrorSrcCpuDirectDirection of mirror.Enumeration
Enumerated Values:
1rx
2tx
.1.3.6.1.4.1.7840.2.1.100.12.3.1.2
mirrorSrcCpuSlotSrc cpu slot index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.12.3.1.3
mirrorSrcCpuStatusStatus.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.3.1.4
.1.3.6.1.4.1.7840.2.1.100.12.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorReflectorPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorReflectorPortTable'
mirror reflector destination port configuration Table of Rspan.
The information about the reflector destination port and 
its associated session will be specified by this table,which 
will not present itself in the mirrorDestTable. Which means 
the mirrorReflectorPortTable and the mirrorDestTable is 
independent from each other.
mirrorReflectorPortEntry row .1.3.6.1.4.1.7840.2.1.100.12.4.1
mirror destination port configuration of Rspan.
Column Syntax OID
mirrorReflectorPortSessionSession ID.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.12.4.1.1
mirrorReflectorPortmirror reflector destination port number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.12.4.1.2
mirrorReflectorPortStatusThe configuration status of the reflector destination port and its associated session.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.4.1.3
.1.3.6.1.4.1.7840.2.1.100.12.5 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorRspanVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorRspanVlanTable'
Vlan configuration Table of Rspan.
mirrorRspanVlanEntry row .1.3.6.1.4.1.7840.2.1.100.12.5.1
Vlan configuration of Rspan.
Indexes
Column Syntax OID
mirrorRspanVlanVlan ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.12.5.1.1
mirrorRspanVlanStatusVlan status.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.5.1.2
.1.3.6.1.4.1.7840.2.1.100.12.6 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mirrorRspanSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mirrorRspanSessionTable'
Session configuration Table of Rspan.When creating an entry, 
the correctness of both the Vlan ID an the Session ID should be ensured.
When destroying an entry, only the correctness of the Session ID is required.
mirrorRspanSessionEntry row .1.3.6.1.4.1.7840.2.1.100.12.6.1
Session configuration of Rspan.
Column Syntax OID
mirrorRspanSessionSession ID.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.12.6.1.1
mirrorRspanSessionVlanVlan ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.12.6.1.2
mirrorRspanSessionStatusThe configuration status of the mirror session and its associated Rspan Vlan.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.12.6.1.3
.1.3.6.1.4.1.7840.2.1.100.13.1.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpRelayServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpRelayServerAddrTable'
The role of DHCP Relay Agent is to forward requests 
and replies between server and client when they are not
in the same subnet. To enable DHCP Relay service user needs to 
specify Relay Server ip address and then restart DHCP Relay.
This Table is to specify Relay Server ip address, 
the maximum numbers of server ip address user can specify is 5.
To Restart DHCP Relay, please use the dhcpRelayRestart variable.
dhcpRelayServerAddrEntry row .1.3.6.1.4.1.7840.2.1.100.13.1.2.1
A conceptual row of dhcpRelayServerAddrTable.
Column Syntax OID
dhcpRelayServerAddrVlanIdThe ID of VLAN interface used by this table entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.1.2.1.1
dhcpRelayServerAddrIndexThe index of relay address set in the VLAN interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.1.2.1.2
dhcpRelayServerAddrServerIpAppoint the destination address used for DHCP relay.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.1.2.1.3
dhcpRelayServerAddrStatusConfiguration status.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.1.2.1.4
.1.3.6.1.4.1.7840.2.1.100.13.1.13 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpRelayOption82InterfaceConfigureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpRelayOption82InterfaceConfigureTable'
After enable the option82 relay function ,the swith must adopt some forwarding policy,
and use specified format for subscriber ID to handle receving the dhcp request packets 
according to specified port.
dhcpRelayOption82InterfaceConfigureEntry row .1.3.6.1.4.1.7840.2.1.100.13.1.13.1
A conceptual row of dhcpRelayOption82InterfaceConfigureTable.
Column Syntax OID
dhcpRelayOption82VidThe Vlan interface being used by this table entry.
Only the Vlan interfaces which have an IP configured will appear in the table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.1.13.1.1
dhcpRelayOption82ForwardPolicyIf set(1), then drop the dhcp request packets with option82 sub-option,
set(2), keep the dhcp request packets with option82 sub-option and forward to the dhcp server,
set(3), the systerm replace the option82 sub-option …
Enumerationr/w
Enumerated Values:
1drop
2keep
3replace
.1.3.6.1.4.1.7840.2.1.100.13.1.13.1.2
dhcpRelayOption82SubscriberIDIf input the 'standard' string ,then use vlan and physical port format for option82 sub-option 1,
other string, that be used as circuit-id of option82 sub-option 1,
the default string is 'standard'.
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.13.1.13.1.3
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1 · 1 row entry · 9 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolTable'
A dhcp pool is a collection of
user configuration such as option config-lease time                         
 or dns-server IPs, a network address for network pool,
 or a host IP plus a hardware address pair for host pool. 
 However, a dhcp pool only can either be a network pool 
 or a host pool, or none of them (such as that pool only 
 containing option config no network address config 
 or a host ip config as well)
dhcpPoolEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1
A conceptual row of dhcpPoolTable.
Column Syntax OID
dhcpPoolPoolNamePoolName, simply specify a string.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.1
dhcpPoolStatusaccession delete the pool,according to dhcpPoolNameEnumerationr/w
Enumerated Values:
0destroy
1active
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.2
dhcpPoolAddressTypeconfigure dhcppool of address styleEnumerationr/w
Enumerated Values:
1network
2host
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.3
dhcpPoolAddressconfigurate dhcp pool.
if dhcpPoolAddressType=1 configurate address range,
if dhcpPoolAddressType=2 configurate single address
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.4
dhcpPoolAddressPrefixdhcp pool ip address prefixSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.5
dhcpPoolAddressStatusaddress of configuration satusEnumerationr/w
Enumerated Values:
0destroy
1active
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.6
dhcpPoolMacAddressappoint user of hardware address.Condition: dhcpPoolAddressType(2).DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.7
dhcpPoolProTypeRFC define protocol style of number express,Condition:dhcpPoolAddressType(2).Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.8
dhcpPoolMacStatushardware address configure status.Condition: dhcpPoolAddressType(2).Enumerationr/w
Enumerated Values:
0destroy
1active
.1.3.6.1.4.1.7840.2.1.100.13.2.3.1.1.9
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolExpandTable'
A dhcp pool is a collection of
user configuration such as option config-lease time                         
 or dns-server IPs, a network address for network pool,
 or a host IP plus a hardware address pair for host pool. 
 However, a dhcp pool only can either be a network pool 
 or a host pool, or none of them (such as that pool only 
 containing option config no network address config 
 or a host ip config as well)
dhcpPoolExpandEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1
A conceptual row of dhcpPoolExpandTable.
Column Syntax OID
dhcpPoolExpandNamePoolName, simply specify a string which
string size NO MORE THAN 8
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.1
dhcpPoolNetbiosNodeTypeConfigure DHCP client of node style.
For example, Broadcast node 1, Peer-to-peer node 2, Mixed node 4, Hybrid node 8
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.2
dhcpPoolDomainNameDHCP client configure domain nameOctetStringr/w
Constraints:
range: 1-255
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.3
dhcpPoolBootFileconfigure DHCP client boot-file nameOctetStringr/w
Constraints:
range: 1-255
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.4
dhcpPoolCLidset dhcp pool client id.
Condition: the pool of address is handcraft bind
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.5
dhcpPoolExpandstatusif configure is valid(0),and the list of all configuration operatation accession
if configure is destroy(1),and the list of all configuration operation delet
Enumerationr/w
Enumerated Values:
0valid
1destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.3.2.1.7
.1.3.6.1.4.1.7840.2.1.100.13.2.4 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpLeaseTimeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpLeaseTimeTable'
configure rent term in address pool
dhcpLeaseTimeEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.4.1
configure rent term in address pool
Column Syntax OID
dhcpLeaseTimePoolNamePoolName, simply specify a string which
string size NO MORE THAN 8
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.1
dhcpLeaseTimeTyperent time style,0 is temporarily rent,1 is forever rentEnumerationr/w
Enumerated Values:
0temp
1infinite
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.2
dhcpLeaseTimeDayday,condition:dhcpLeaseTimeType=temp(0).Integer32r/w
Constraints:
range: 0-365
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.3
dhcpLeaseTimeHourshour,condition:dhcpLeaseTimeType=temp(0).Integer32r/w
Constraints:
range: 0-23
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.4
dhcpLeaseTimeMinuteshour,condition:dhcpLeaseTimeType=temp(0).Integer32r/w
Constraints:
range: 0-59
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.5
dhcpLeaseTimeStatusSetting this to active(1) creates an entry.
Setting this to destroy(2) destroys an entry.
default status is 0,no opperation
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.4.1.6
.1.3.6.1.4.1.7840.2.1.100.13.2.5 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolOptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolOptionTable'
configure pool of optional parameters
dhcpPoolOptionEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.5.1
configure pool of optional parameters
Column Syntax OID
dhcpPoolOptionNamePoolName, simply specify a string which
string size NO MORE THAN 8
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.1
dhcpPoolOptionIndexThe index of option which has been set in this poolSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.2
dhcpPoolOptionIddhcpPoolOptionId (0..254)Integer32r/w
Constraints:
range: 0-254
.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.3
dhcpPoolOptionTypedhcpPoolOptionTypeEnumerationr/w
Enumerated Values:
1ascii
2hex
3ipaddress
.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.4
dhcpPoolOptionif dhcpPoolOptionType=1, ASCII string
if dhcpPoolOptionType=2, HEX string
if dhcpPoolOptionType=3,IP address
DisplayStringr/w.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.5
dhcpPoolOptionStatusoptional parameters configure statusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.5.1.6
.1.3.6.1.4.1.7840.2.1.100.13.2.6 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpServerExcludedIpAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpServerExcludedIpAddrTable'
dhcpServer Excluded IpAddr Table
dhcpServerExcludedIpAddrEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.6.1
dhcpServer Excluded IpAddrEntry
Column Syntax OID
dhcpServerExcludedIpAddrLowIpThe excluded IP address,
or first IP address in an excluded address range.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.6.1.1
dhcpServerExcludedIpAddrHiIpThe last IP address in the excluded address range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.6.1.2
dhcpServerExcludedIpAddrStatusSetting this to active(1) creates an entry.
Setting this to destroy(2) destroys an entry.
Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.6.1.3
.1.3.6.1.4.1.7840.2.1.100.13.2.8 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolDnsSerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolDnsSerTable'
dhcpPool Dns Server Table:the maximum 8 dns is allowed
the first dns server has the highest priority.so address1 is highest priority,next is address2,address3...
dhcpPoolDnsSerEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.8.1
is DHCP client configure DNS server
Column Syntax OID
dhcpPoolDnsSerPoolNamePoolName, simply specify a string which
string size NO MORE THAN 8
DisplayString.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.1
dhcpPoolDnsSerIpAddress1IP address,MUST.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.2
dhcpPoolDnsSerIpAddress2IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.3
dhcpPoolDnsSerIpAddress3IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.4
dhcpPoolDnsSerIpAddress4IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.5
dhcpPoolDnsSerIpAddress5IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.6
dhcpPoolDnsSerIpAddress6IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.7
dhcpPoolDnsSerIpAddress7IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.8
dhcpPoolDnsSerIpAddress8IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.9
dhcpPoolDnsSerStatusconfigure DNS server statusEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.8.1.10
.1.3.6.1.4.1.7840.2.1.100.13.2.9 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolDefaultRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolDefaultRouterTable'
dhcpPoolDefaultRouterTable:
the maximum 8 default gateway address can be set,the first gateway has the highest priority,
So address1 has the highest priority,next is address2,address3...
dhcpPoolDefaultRouterEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.9.1
DHCP client machine configure default gateway
Column Syntax OID
dhcpPoolDefaultRouterPoolNamePoolName, simply specify a string which
string size NO MORE THAN 8
DisplayString.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.1
dhcpPoolDefaultRouterIpAddress1IP address,mustSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.2
dhcpPoolDefaultRouterIpAddress2IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.3
dhcpPoolDefaultRouterIpAddress3IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.4
dhcpPoolDefaultRouterIpAddress4IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.5
dhcpPoolDefaultRouterIpAddress5IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.6
dhcpPoolDefaultRouterIpAddress6IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.7
dhcpPoolDefaultRouterIpAddress7IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.8
dhcpPoolDefaultRouterIpAddress8IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.9
dhcpPoolDefaultRouterStatusconfigure default gateway state machineEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.9.1.10
.1.3.6.1.4.1.7840.2.1.100.13.2.10 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolNextServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolNextServerTable'
dhcpPoolNextServerTable
dhcpPoolNextServerEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.10.1
dhcpPoolNextServerEntry
Column Syntax OID
dhcpPoolNextServerPoolNamePoolName, simply specify a string which
string size NO MORE THAN 8
DisplayString.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.1
dhcpPoolNextServerIpAddress1IP address,mustSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.2
dhcpPoolNextServerIpAddress2IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.3
dhcpPoolNextServerIpAddress3IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.4
dhcpPoolNextServerIpAddress4IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.5
dhcpPoolNextServerIpAddress5IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.6
dhcpPoolNextServerIpAddress6IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.7
dhcpPoolNextServerIpAddress7IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.8
dhcpPoolNextServerIpAddress8IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.9
dhcpPoolNextServerStatusstatus machineEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.10.1.10
.1.3.6.1.4.1.7840.2.1.100.13.2.11 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpPoolWinsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpPoolWinsTable'
dhcpPoolWinsTable
dhcpPoolWinsEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.11.1
configure Wins sever address
Column Syntax OID
dhcpPoolWinsPoolNamePoolName, simply specify a string which
string size NO MORE THAN 8
DisplayString.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.1
dhcpPoolWinsIpAddress1IP address,mustSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.2
dhcpPoolWinsIpAddress2IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.3
dhcpPoolWinsIpAddress3IPaddress,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.4
dhcpPoolWinsIpAddress4IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.5
dhcpPoolWinsIpAddress5IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.6
dhcpPoolWinsIpAddress6IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.7
dhcpPoolWinsIpAddress7IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.8
dhcpPoolWinsIpAddress8IP address,optionSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.9
dhcpPoolWinsStatusconfigure wins server status machineEnumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.13.2.11.1.10
.1.3.6.1.4.1.7840.2.1.100.13.2.12 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpServerLeaseBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpServerLeaseBindingTable'
express IP address and MAC address bind status
dhcpServerLeaseBindingEntry row .1.3.6.1.4.1.7840.2.1.100.13.2.12.1
express IP address and MAC address bind status
Column Syntax OID
dhcpServerLeaseBindingIpcertain address appointed, format is x.x.x.xSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.2.12.1.1
dhcpServerLeaseBindingTypemanual express handcraft bind style;dynamic express dynamic distribution styleEnumeration
Enumerated Values:
1manual
2dynamic
.1.3.6.1.4.1.7840.2.1.100.13.2.12.1.2
dhcpServerLeaseBindingMacMAC addressDisplayString.1.3.6.1.4.1.7840.2.1.100.13.2.12.1.3
dhcpServerLeaseBindingLeaseTimerent termSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.2.12.1.4
.1.3.6.1.4.1.7840.2.1.100.13.3.17 · 1 row entry · 8 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingPortConfigTable'
After enable the dhcp snooping function, the administrator can configure the port information.
dhcpSnoopingPortConfigEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.17.1
A conceptual row of dhcpSnoopingPortConfigTable.
Column Syntax OID
dhcpSnoopingPortIndexConfigure the dhcp snooping function on the specified port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.1
dhcpSnoopingUserControlMaxNumConfigure the maximum of the binding users on a port, the range of binding users number is
0-1024,the default number is 1024.
Integer32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.2
dhcpSnoopingUserControlIf set(0), not enable the user control function on a specified port,
if set(1), enable the user control function on a specified port,
the default value is set(0).
Enumerationr/w
Enumerated Values:
0notEnable
1enable
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.3
dhcpSnoopingTrustConfigure trust function on a port or vlan list string.If input the string 'all', then trust
all the vlan. If input the string '1-2', then only trust the DHCP packets with that
vlan ID is 1 or 2. If input string '…
OctetStringr/w.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.4
dhcpSnoopingBindingDot1xIf set(0), not enable to notify dhcp snooping binding information to Dot1x module,
if set(1), enable to notify dhcp snooping binding information to Dot1x module,
the default value is set(0).
Enumerationr/w
Enumerated Values:
0notEnable
1enable
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.5
dhcpSnoopingSubScriberIDIf input the 'standard' string ,then use vlan mac address format for option82 sub-option 2,
other string, that be used as romote ID of option82 sub-option 2,
the default string is 'standard'.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.6
dhcpSnoopingAlarmCountShow the alarm count of dhcp snooping on a specified port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.7
dhcpSnoopingBindingCountShow the binding count of dhcp snooping on a specified port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.17.1.8
.1.3.6.1.4.1.7840.2.1.100.13.3.18 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingPortActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingPortActionTable'
After enable the dhcp snooping function, the administrator can configure the port action.
dhcpSnoopingPortActionEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.18.1
A conceptual row of dhcpSnoopingPortActionTable.
Column Syntax OID
dhcpSnoopingPortConfigure the dhcp snooping function on the specified port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.18.1.1
dhcpSnoopingActionTypeIf set(0), not to add any action,
if set(1), add shutdown action ,
and if set(2), add blackhole action on a port when detectd the DHCP server protended .
Enumerationr/w
Enumerated Values:
0noAction
1shutdown
2blackhole
.1.3.6.1.4.1.7840.2.1.100.13.3.18.1.2
dhcpSnoopingActionRecoveryTimeConfigure the recovery time of action, the range time is 10-3600 seconds,
the default value is 30 seconds.
Integer32r/w
Constraints:
range: 10-3600
.1.3.6.1.4.1.7840.2.1.100.13.3.18.1.3
dhcpSnoopingActionStatusIf set(0), then destory an aciton configured previously,
if set(1), then configure an action on a port.
Enumerationr/w
Enumerated Values:
0destroy
1active
.1.3.6.1.4.1.7840.2.1.100.13.3.18.1.4
.1.3.6.1.4.1.7840.2.1.100.13.3.19 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingStaticBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingStaticBindingTable'
After enable the dhcp snooping function, the administrator can configure or delete the dhcp 
snooping static binding.
dhcpSnoopingStaticBindingEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.19.1
A conceptual row of dhcpSnoopingStaticBindingTable.
Column Syntax OID
dhcpSnoopingStaticBindingIPThe one IP address just only identifies one ack binding entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.1
dhcpSnoopingStaticBindingMACConfigure the MAC address of the static binding.OctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.2
dhcpSnoopingStaticBindingMaskConfigure the IP address mask of the static binding.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.3
dhcpSnoopingStaticBindingPortConfigure the port of the static binding.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.4
dhcpSnoopingStaticBindingVidConfigure the vlan ID of the static binding.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.5
dhcpSnoopingStaticBindingStatusIf set(0), then distory a specified static binding that has been configured,
if set(1), create a specified static binding according to the input content.
Enumerationr/w
Enumerated Values:
0destory
1active
.1.3.6.1.4.1.7840.2.1.100.13.3.19.1.6
.1.3.6.1.4.1.7840.2.1.100.13.3.20 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingAckBindingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingAckBindingInfoTable'
Show the specified bindings after received the DHCP ACK packets.
dhcpSnoopingAckBindingInfoEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.20.1
A conceptual row of dhcpSnoopingAckBindingInfoTable.
Column Syntax OID
dhcpSnoopingAckBindingIPThe one IP address just only identifies one ack binding entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.1
dhcpSnoopingAckBindingMACShow the MAC address of the ack binding.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.2
dhcpSnoopingAckBindingPortShow the port index information of the ack binding.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.3
dhcpSnoopingAckBindingVidShow the Vid information of the ack bidning.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.4
dhcpSnoopingAckBindingLeaseShow the lease of the ack binding. The lease of static binding is infinite, the lease of dynamic binding comes from the DHCP
reply packets of dhcp server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.5
dhcpSnoopingAckBindingFlagShow the type of the ack binding. The flag 'S' indentifies the static type binding, 'D' indentifies the dynamic type binding,
'U' indentifies that bindings are uploaded from the server, 'O' indentifies that DHCP request…
OctetString
Constraints:
range: 1-10
.1.3.6.1.4.1.7840.2.1.100.13.3.20.1.6
.1.3.6.1.4.1.7840.2.1.100.13.3.21 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingRequestBindingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingRequestBindingInfoTable'
Show the specified bindings after received the DHCP request packets.
dhcpSnoopingRequestBindingInfoEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.21.1
A conceptual row of dhcpSnoopingRequestBindingInfoTable.
Column Syntax OID
dhcpSnoopingRequestBindingIPThe one IP address just only identifies one Request binding entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.13.3.21.1.1
dhcpSnoopingRequestBindingMACShow the MAC address of the Request binding.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.13.3.21.1.2
dhcpSnoopingRequestBindingPortShow the port index information of the Request binding.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.21.1.3
dhcpSnoopingRequestBindingVidShow the Vid information of the Request binding.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.21.1.4
dhcpSnoopingRequestBindingLeaseShow the lease of the Request binding.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.13.3.21.1.5
.1.3.6.1.4.1.7840.2.1.100.13.3.22 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dhcpSnoopingAlarmInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dhcpSnoopingAlarmInfoTable'
Show the dhcp snooping alarm information.
dhcpSnoopingAlarmInfoEntry row .1.3.6.1.4.1.7840.2.1.100.13.3.22.1
A conceptual row of dhcpSnoopingAlarmInfoTable.
Column Syntax OID
dhcpSnoopingAlarmInfoPortIndexThe port sequence of the alarm events.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.1
dhcpSnoopingAlarmInfoNumThe sequence of the alarm events on a port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.2
dhcpSnoopingAlarmInfoTypeShow the type information of the alarm event.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.3
dhcpSnoopingAlarmInfoBlackholeMACShow the blackhole mac address of the alarm event.OctetString.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.4
dhcpSnoopingAlarmInfoRecoveryTimeShow the recovery time of the alarm event.DisplayString.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.5
dhcpSnoopingAlarmInfoRecoveryActionStatusShow the status of the recovery action.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.13.3.22.1.6
.1.3.6.1.4.1.7840.2.1.100.14.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portGroupTable'
This table contains port group information associated 
with the local system known to this agent.
portGroupEntry row .1.3.6.1.4.1.7840.2.1.100.14.2.1
Configure the port group information.
Indexes
Column Syntax OID
portGroupIndexPort group number.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.14.2.1.1
portGroupMemberCountThe number of port group member.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.14.2.1.2
loadBalanceLoad balancing method:
dst-src-mac(1):destination and source mac address;
dst-src-ip(2):destination and source ip address;
src-mac(3):source mac address;
dst-mac(4):destination mac address;
src-ip(5):source ip address;
…
Enumerationr/w
Enumerated Values:
1dst-src-mac
2dst-src-ip
3src-mac
4dst-mac
5src-ip
6dst-ip
7dst-src-mac-ip
.1.3.6.1.4.1.7840.2.1.100.14.2.1.3
portGroupInfoPort group brief information. Format is ID, Mode, Partner ID, Ports and Load-balance.
If there is no member in the port group, the value is empty.
DisplayString.1.3.6.1.4.1.7840.2.1.100.14.2.1.4
.1.3.6.1.4.1.7840.2.1.100.14.3 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portGroupPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portGroupPortListTable'
This table contains port group member information associated 
with the local system known to this agent.
portGroupPortListEntry row .1.3.6.1.4.1.7840.2.1.100.14.3.1
Configure the port group member information.
Column Syntax OID
portGroupMemberIndexPort group member index. Format is group number and port index of member.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.14.3.1.1
portGroupMemberNameThe name of port group member.DisplayString.1.3.6.1.4.1.7840.2.1.100.14.3.1.2
portGroupMemberModeThe mode of port group member.Enumeration
Enumerated Values:
1on
2active
3passive
.1.3.6.1.4.1.7840.2.1.100.14.3.1.3
portGroupMemberPriorityThe port priority of port group member. If the port group mode is on, the value is -1.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.7840.2.1.100.14.3.1.4
portGroupMemberTimeoutThe timeout mode of port group member. If the port group mode is on, the value is -1.Enumeration
Enumerated Values:
0long
1short
.1.3.6.1.4.1.7840.2.1.100.14.3.1.5
portGroupMemberStatusThe status of port group member. If the port group mode is on, the value is -1.Enumeration
Enumerated Values:
0unselected
1selected
2standby
.1.3.6.1.4.1.7840.2.1.100.14.3.1.6
.1.3.6.1.4.1.7840.2.1.100.15.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk securityIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::securityIpTable'
A list of snmp securityIp entries.
securityIpEntry row .1.3.6.1.4.1.7840.2.1.100.15.4.1
Configure the secure IP address which is
allowed to access the switch on the NMS;
Indexes
Column Syntax OID
securityIpIndexIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.15.4.1.1
securityIpAddressThe address of security.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.15.4.1.2
securityIpStatusWriting this to active(1) creates an entry.
Writing this to destroy(2) destroys an entry.
Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.15.4.1.3
.1.3.6.1.4.1.7840.2.1.100.15.5 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk trapDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::trapDestTable'
A list of trap destination entries.
trapDestEntry row .1.3.6.1.4.1.7840.2.1.100.15.5.1
This entry includes a destination IP address to which to send
traps for this community.
Indexes
Column Syntax OID
trapDestIndexIndexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.15.5.1.1
trapDestAddressThe address to send traps.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.15.5.1.2
trapDestVersionThis variables represent the version of the Trap we wish to send to trap Receiver.
If the value is 0, mean we wish to send Version 1 trap. If the value is 1,
mean we wish to send version 2 trap.
Enumerationr/w
Enumerated Values:
0version1
1version2
.1.3.6.1.4.1.7840.2.1.100.15.5.1.3
trapDestCommunityA community to which this destination address belongs.OctetStringr/w
Constraints:
range: 1-255
.1.3.6.1.4.1.7840.2.1.100.15.5.1.4
trapDestStatusWriting this to active(1) creates an entry.
Writing this to destroy(2) destroys an entry.
Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.15.5.1.5
.1.3.6.1.4.1.7840.2.1.100.16.1.6 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk arpSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::arpSecurityTable'
arp security table
arpsecurityEntry row .1.3.6.1.4.1.7840.2.1.100.16.1.6.1
index is L3 interface index
Column Syntax OID
arpSecurityIfindexL3 interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.1.6.1.1
arpSecurityUpdateProtectenable or disable arp security update protect on the current portEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.16.1.6.1.2
arpSecurityLearnProtectenable or disable arp security learn protect on the current portEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.16.1.6.1.3
arpSecurityConvertconvert dynamic arp-cache to static arp item on the port.enable mean convert,get OPS is nosenseEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.16.1.6.1.4
.1.3.6.1.4.1.7840.2.1.100.16.1.7 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk arpProxyArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::arpProxyArpTable'
configure arp proxy list
arpProxyArpEntry row .1.3.6.1.4.1.7840.2.1.100.16.1.7.1
index is L3 interface index
Column Syntax OID
arpProxyArpIfIndexL3 interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.1.7.1.1
arpProxyArpStatusarp proxy enableEnumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.16.1.7.1.2
.1.3.6.1.4.1.7840.2.1.100.16.1.8 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk arpStacticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::arpStacticTable'
static state arp configuration list
arpStaticEntry row .1.3.6.1.4.1.7840.2.1.100.16.1.8.1
index is 'arpProxyArpIfIndex.arpStaticIpaddress'.
Column Syntax OID
arpStaticIfindexL3 interface indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.1.8.1.1
arpStaticIpaddressip addressSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.1.8.1.2
arpStaticMacthe Mac address of the arp itemOctetStringr/w
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.16.1.8.1.3
arpStaticPortIndexthe port index of the arp itemSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.1.8.1.4
arpStaticStatusvalid(1),this is a active arp when get/getnext; when set,mean create the static arp item
invalid(2); when set, mean destory the current arp item
waitingforset(3); reserved
Enumerationr/w
Enumerated Values:
1valid
2invalid
3waitingforset
.1.3.6.1.4.1.7840.2.1.100.16.1.8.1.5
.1.3.6.1.4.1.7840.2.1.100.16.2.1 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ipStaticRouteExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ipStaticRouteExtTable'
static route configuration list
ipStaticRouteExtEntry row .1.3.6.1.4.1.7840.2.1.100.16.2.1.1
The index of this table is ip.mask
Column Syntax OID
ipStaticRouteExtDeststatic route of intention net segmentSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.2.1.1.1
ipStaticRouteExtMaskmaskSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.2.1.1.2
ipStaticRouteExtNextHopnext step ipSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.2.1.1.3
ipStaticRouteExtMetricManage distance/PRIInteger32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.7840.2.1.100.16.2.1.1.4
ipStaticRouteExtStatusWhen you get/getnext one entry, the meaning of 'valid' is that the static route which you get is
valid (or active); when you want to configure one static route, 'valid/creating' stand for setting one
entry, and 'inval…
Enumerationr/w
Enumerated Values:
1valid
2invalid
3waitingforset
.1.3.6.1.4.1.7840.2.1.100.16.2.1.1.5
.1.3.6.1.4.1.7840.2.1.100.16.3.4 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ripInstabilityPreventingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ripInstabilityPreventingTable'
A list of RIP instability preventing status
ripInstabilityPreventingEntry row .1.3.6.1.4.1.7840.2.1.100.16.3.4.1
An entry in the table, containing information
about RIP instability preventing configuration.
The ifIndex index is a VLAN's ifIndex
Indexes
Column Syntax OID
ripVlanIndexThis is defined as a VLAN interface.
A routing interface is a VLAN binds a IP
subnet.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.3.4.1.1
ripSplitHorizonStatusEnable or Disable RIP instability preventing status on an interfaceEnumerationr/w
Enumerated Values:
0poisonReverse
1none
2splitHorizon
.1.3.6.1.4.1.7840.2.1.100.16.3.4.1.2
.1.3.6.1.4.1.7840.2.1.100.16.3.6 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ripNetworkInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ripNetworkInterfaceTable'
ripNetworkInterfaceEntry row .1.3.6.1.4.1.7840.2.1.100.16.3.6.1
Column Syntax OID
ripNetworkInterfaceAddressThe RIP Network address(the ip address of the interface).SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.3.6.1.1
ripNetworkInterfaceStatusSet this variable to create or destroy a RIP network address.
ValidStatus:
A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two valu…
ValidStatusr/w
Type Values:
0invalid
1valid
.1.3.6.1.4.1.7840.2.1.100.16.3.6.1.2
.1.3.6.1.4.1.7840.2.1.100.16.3.7 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ripNetworkAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ripNetworkAddrTable'
ripNetworkAddrEntry row .1.3.6.1.4.1.7840.2.1.100.16.3.7.1
Column Syntax OID
ripNetworkAddrAddressThe RIP Network address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.3.7.1.1
ripNetworkAddrPrefixLenThe RIP Network prefix length of address.Integer32
Constraints:
range: 0-32
.1.3.6.1.4.1.7840.2.1.100.16.3.7.1.2
ripNetworkAddrStatusSet this variable to create or destroy a RIP network address.
ValidStatus:
A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two valu…
Enumerationr/w
Enumerated Values:
0invalid
1valid
.1.3.6.1.4.1.7840.2.1.100.16.3.7.1.3
.1.3.6.1.4.1.7840.2.1.100.16.4.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ospfNssaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ospfNssaTable'
A conceptually table for ospfNssaEntry.
ospfNssaEntry row .1.3.6.1.4.1.7840.2.1.100.16.4.2.1
A conceptually row for ospfNssaTable.
Indexes
Column Syntax OID
ospfNssaAreaIdThe 32-bit identifier for the NSSA. On creation,
this can be derived from the instance.
OspfAreaID.1.3.6.1.4.1.7840.2.1.100.16.4.2.1.1
ospfNssaStatusThe status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
EnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.2.1.2
ospfNssaRedistributeStatusEnabled or disabled to import routes only into the normal areas,
but not into the NSSA area.
EnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.2.1.3
ospfNssaOriginateDefaultInfoStatusEnable or disable to generate a Type 7 default into the NSSA area.EnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.2.1.4
.1.3.6.1.4.1.7840.2.1.100.16.4.3 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ospfRedistributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ospfRedistributeTable'
The conceptual table of all of ospfRedistributeEntry.
ospfRedistributeEntry row .1.3.6.1.4.1.7840.2.1.100.16.4.3.1
The conceptual row for ospfRedistributeTable.
Column Syntax OID
ospfRedistributeProtocolProtocol ID.Enumeration
Enumerated Values:
1kernel
2connect
3static
4rip
6ospf
8bgp
9isis
.1.3.6.1.4.1.7840.2.1.100.16.4.3.1.1
ospfRedistributeStatusenable-- redistribute the specific route,disable--- does not redistribute the specific route.For example
when the ospfRedistributeProtocol is equal to rip, 'enable' stands for redistribute the route from rip.
EnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.3.1.2
ospfRedistributeMetricTypeMetric type.Enumerationr/w
Enumerated Values:
1type1
2type2
.1.3.6.1.4.1.7840.2.1.100.16.4.3.1.3
ospfRedistributeMetricMetric value.OspfBigMetricr/w
Type Constraints:
range: 0..16777214
.1.3.6.1.4.1.7840.2.1.100.16.4.3.1.4
.1.3.6.1.4.1.7840.2.1.100.16.4.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ospfSummaryAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ospfSummaryAddressTable'
The conceptual table of all of ospfSummaryAddressEntry.
ospfSummaryAddressEntry row .1.3.6.1.4.1.7840.2.1.100.16.4.4.1
The conceptual row for ospfSummaryAddressTable.
Column Syntax OID
ospfSummaryAddressSummary address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.4.4.1.1
ospfSummaryMaskSummary mask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.4.4.1.2
ospfSummaryStatusvalid/enable--- define a summary, invalid/disable destory the summary from the routerEnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.4.1.3
.1.3.6.1.4.1.7840.2.1.100.16.4.5 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ospfNetworkAreaAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ospfNetworkAreaAddressTable'
The conceptual table of all of ospfNetworkAreaAddressEntry.
ospfNetworkAreaAddressEntry row .1.3.6.1.4.1.7840.2.1.100.16.4.5.1
The conceptual row for ospfNetworkAreaAddressTable.
Column Syntax OID
ospfNetworkAareaAddressNetworkArea address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.4.5.1.1
ospfNetworkAreaMaskNetworkArea mask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.4.5.1.2
ospfNetworkAreaAreaIdNetworkArea area ID.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.4.5.1.3
ospfNetworkAreaStatusenabled(1), disabled(0).
valid/enable--- run the ospf on the interfaces,which match the ipaddr/mask;
invalid/disable--disable the ospf.
ValidStatus:
A simple status value for the object to create and destroy
a table en…
EnabledStatusPrivater/w
Type Values:
0disabled
1enabled
.1.3.6.1.4.1.7840.2.1.100.16.4.5.1.4
.1.3.6.1.4.1.7840.2.1.100.16.5.2 · 1 row entry · 10 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dvmrpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dvmrpInterfaceTable'
The (conceptual) table listing the router's multicast-
capable interfaces.
dvmrpInterfaceEntry row .1.3.6.1.4.1.7840.2.1.100.16.5.2.1
An entry (conceptual row) in the dvmrpInterfaceTable. This
row augments ipMRouteInterfaceEntry in the IP Multicast MIB,
where the threshold object resides.
Column Syntax OID
dvmrpInterfaceIndexThe ifIndex value of the interface for which DVMRP is
enabled.
InterfaceIndex
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.1
dvmrpInterfaceLocalAddressThe IP address this system will use as a source address on
this interface. On unnumbered interfaces, it must be the
same value as dvmrpInterfaceLocalAddress for some interface
on the system.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.2
dvmrpInterfaceMetricThe distance metric for this interface which is used to
calculate distance vectors.
Integer32r/w
Constraints:
range: 1-31
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.3
dvmrpInterfaceStatusThe status of this entry. Creating the entry enables DVMRP
on the virtual interface; destroying the entry or setting it
to notInService disables DVMRP on the virtual interface.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.4
dvmrpInterfaceRcvBadPktsThe number of DVMRP messages received on the interface by
the DVMRP process which were subsequently discarded as
invalid (e.g. invalid packet format, or a route report from
an unknown neighbor).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.5
dvmrpInterfaceRcvBadRoutesThe number of routes, in valid DVMRP packets, which were
ignored because the entry was invalid.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.6
dvmrpInterfaceSentRoutesThe number of routes, in DVMRP Report packets, which have
been sent on this interface. Together with
dvmrpNeighborRcvRoutes at a peer, this object is useful for
detecting routes being lost.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.7
dvmrpInterfaceKeyThe (shared) key for authenticating neighbors on this
interface. This object is intended solely for the purpose
of setting the interface key, and MUST be accessible only
via requests using both authentication and priva…
SnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.8
dvmrpInterfaceKeyVersionThe highest version number of all known interface keys for
this interface used for authenticating neighbors.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.9
dvmrpInterfaceGenerationIdThe generation identifier for the interface. This is used
by neighboring routers to detect whether the DVMRP routing
table should be resent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.2.1.10
.1.3.6.1.4.1.7840.2.1.100.16.5.3 · 1 row entry · 12 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dvmrpNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dvmrpNeighborTable'
The (conceptual) table listing the router's DVMRP
neighbors, as discovered by receiving DVMRP messages.
dvmrpNeighborEntry row .1.3.6.1.4.1.7840.2.1.100.16.5.3.1
An entry (conceptual row) in the dvmrpNeighborTable.
Column Syntax OID
dvmrpNeighborIfIndexThe value of ifIndex for the virtual interface used to
reach this DVMRP neighbor.
InterfaceIndex
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.1
dvmrpNeighborAddressThe IP address of the DVMRP neighbor for which this entry
contains information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.2
dvmrpNeighborUpTimeThe time since this DVMRP neighbor (last) became a neighbor
of the local router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.3
dvmrpNeighborExpiryTimeThe minimum time remaining before this DVMRP neighbor will
be aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.4
dvmrpNeighborGenerationIdThe neighboring router's generation identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.5
dvmrpNeighborMajorVersionThe neighboring router's major DVMRP version number.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.6
dvmrpNeighborMinorVersionThe neighboring router's minor DVMRP version number.Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.7
dvmrpNeighborCapabilitiesThis object describes the neighboring router's
capabilities. The leaf bit indicates that the neighbor has
only one interface with neighbors. The prune bit indicates
that the neighbor supports pruning. The generationI…
Bits
Enumerated Values:
0leaf
1prune
2generationID
3mtrace
4snmp
5netmask
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.8
dvmrpNeighborRcvRoutesThe total number of routes received in valid DVMRP packets
received from this neighbor. This can be used to diagnose
problems such as unicast route injection, as well as giving
an indication of the level of DVMRP route…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.9
dvmrpNeighborRcvBadPktsThe number of packet received from this neighbor which were
discarded as invalid.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.10
dvmrpNeighborRcvBadRoutesThe number of routes, in valid DVMRP packets received from
this neighbor, which were ignored because the entry was
invalid.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.11
dvmrpNeighborStateState of the neighbor adjacency.Enumeration
Enumerated Values:
1oneway
2active
3ignoring
4down
.1.3.6.1.4.1.7840.2.1.100.16.5.3.1.12
.1.3.6.1.4.1.7840.2.1.100.16.5.4 · 1 row entry · 7 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dvmrpRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dvmrpRouteTable'
The table of routes learned through DVMRP route exchange.
dvmrpRouteEntry row .1.3.6.1.4.1.7840.2.1.100.16.5.4.1
An entry (conceptual row) containing the multicast routing
information used by DVMRP in place of the unicast routing
information.
Column Syntax OID
dvmrpRouteSourceThe network address which when combined with the
corresponding value of dvmrpRouteSourceMask identifies the
sources for which this entry contains multicast routing
information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.1
dvmrpRouteSourceMaskThe network mask which when combined with the corresponding
value of dvmrpRouteSource identifies the sources for which
this entry contains multicast routing information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.2
dvmrpRouteUpstreamNeighborThe address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources are received.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.3
dvmrpRouteIfIndexThe value of ifIndex for the interface on which IP
datagrams sent by these sources are received. A value of 0
typically means the route is an aggregate for which no next-
hop interface exists.
InterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.4
dvmrpRouteMetricThe distance in hops to the source subnet.Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.5
dvmrpRouteExpiryTimeThe minimum amount of time remaining before this entry will
be aged out.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.6
dvmrpRouteUpTimeThe time since the route represented by this entry was
learned by the router.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.4.1.7
.1.3.6.1.4.1.7840.2.1.100.16.5.5 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dvmrpRouteNextHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dvmrpRouteNextHopTable'
The (conceptual) table containing information on the next
hops on outgoing interfaces for routing IP multicast
datagrams.
dvmrpRouteNextHopEntry row .1.3.6.1.4.1.7840.2.1.100.16.5.5.1
An entry (conceptual row) in the list of next hops on
outgoing interfaces to which IP multicast datagrams from
particular sources are routed.
Column Syntax OID
dvmrpRouteNextHopSourceThe network address which when combined with the
corresponding value of dvmrpRouteNextHopSourceMask
identifies the sources for which this entry specifies a next
hop on an outgoing interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.5.1.1
dvmrpRouteNextHopSourceMaskThe network mask which when combined with the corresponding
value of dvmrpRouteNextHopSource identifies the sources for
which this entry specifies a next hop on an outgoing
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.5.1.2
dvmrpRouteNextHopIfIndexThe ifIndex value of the interface for the outgoing
interface for this next hop.
InterfaceIndex
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.7840.2.1.100.16.5.5.1.3
dvmrpRouteNextHopTypeType is leaf if no downstream dependent neighbors exist on
the outgoing virtual interface. Otherwise, type is branch.
Enumeration
Enumerated Values:
1leaf
2branch
.1.3.6.1.4.1.7840.2.1.100.16.5.5.1.4
.1.3.6.1.4.1.7840.2.1.100.16.5.6 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dvmrpPruneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dvmrpPruneTable'
The (conceptual) table listing the router's upstream prune
state.
dvmrpPruneEntry row .1.3.6.1.4.1.7840.2.1.100.16.5.6.1
An entry (conceptual row) in the dvmrpPruneTable.
Column Syntax OID
dvmrpPruneGroupThe group address which has been pruned.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.6.1.1
dvmrpPruneSourceThe address of the source or source network which has been
pruned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.6.1.2
dvmrpPruneSourceMaskThe address of the source or source network which has been
pruned. The mask must either be all 1's, or else
dvmrpPruneSource and dvmrpPruneSourceMask must match
dvmrpRouteSource and dvmrpRouteSourceMask for some entry …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.16.5.6.1.3
dvmrpPruneExpiryTimeThe amount of time remaining before this prune should
expire at the upstream neighbor. This value should be the
minimum of the default prune lifetime and the remaining
prune lifetimes of the local router's downstream n…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.16.5.6.1.4
.1.3.6.1.4.1.7840.2.1.100.17.2 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sntpServerTable'
The ipv4 sntp server configration table.
sntpServerEntry row .1.3.6.1.4.1.7840.2.1.100.17.2.1
A set of configuration parameters for a ipv4 sntp server.
Column Syntax OID
sntpServerVersionThe version of ipv4 sntp server.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.17.2.1.1
sntpServerAddressThe ipv4 address of the sntp server.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.17.2.1.2
sntpServerStatusNow state.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.17.2.1.3
.1.3.6.1.4.1.7840.2.1.100.17.3 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk sntpServer6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::sntpServer6Table'
The ipv6 sntp server configration table.
sntpServer6Entry row .1.3.6.1.4.1.7840.2.1.100.17.3.1
A set of configuration parameters for a ipv6 sntp server.
Column Syntax OID
sntpServer6VersionThe version of ipv6 sntp server.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.7840.2.1.100.17.3.1.1
sntpServer6AddressThe IP address of the ipv6 sntp server.Ipv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.7840.2.1.100.17.3.1.2
sntpServer6StatusNow state.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.17.3.1.3
.1.3.6.1.4.1.7840.2.1.100.18.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk urpfPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::urpfPortTable'
The URPF port configration table.
urpfPortEntry row .1.3.6.1.4.1.7840.2.1.100.18.2.1
The index of this table is port index.
Indexes
Column Syntax OID
urpfPortIndexPort Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.18.2.1.1
urpfPortModeConfigration of the URPF mode on the port.Enumerationr/w
Enumerated Values:
0strict
1loose
.1.3.6.1.4.1.7840.2.1.100.18.2.1.2
urpfPortAllowDefaultAllow or not allow default route of URPF.Enumerationr/w
Enumerated Values:
0noallowdefaultroute
1allowdefaultroute
.1.3.6.1.4.1.7840.2.1.100.18.2.1.3
urpfPortStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.18.2.1.4
.1.3.6.1.4.1.7840.2.1.100.20.3 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscmVMacbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscmVMacbindingTable'
dcscm destination control multicast, Acl is binded to VMac
dcscmVMacbindingEntry row .1.3.6.1.4.1.7840.2.1.100.20.3.1
The index of this table is Vlanid,MacAddress
Column Syntax OID
dcscmVMacbindingVlanidDcscm destination control multicast,The vlanid of ruleInteger32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.20.3.1.1
dcscmVMacbindingMacAddrDcscm destination control multicast,The Mac Address of ruleOctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.20.3.1.2
dcscmVMacbindingAclNumberDcscm destination control multicast,The Acl number of rule ; 0 means del the rule binded to vmacInteger32r/w
Constraints:
range: 0-0
range: 6000-7999
.1.3.6.1.4.1.7840.2.1.100.20.3.1.3
.1.3.6.1.4.1.7840.2.1.100.20.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscmSipbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscmSipbindingTable'
dcscm destination control multicast, Acl is binded to Sip
dcscmSipbindingEntry row .1.3.6.1.4.1.7840.2.1.100.20.4.1
The index of this table is Sourceip,SourceMask
Column Syntax OID
dcscmSipbindingSipAddressDcscm destination control multicast,The Source ip of ruleSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.20.4.1.1
dcscmSipbindingSipMaskDcscm destination control multicast,The Source ip mask len of ruleSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.20.4.1.2
dcscmSipbindingAclNumberDcscm destination control multicast,The Acl number of rule;0 means del the rule binded to sipInteger32r/w
Constraints:
range: 0-0
range: 6000-7999
.1.3.6.1.4.1.7840.2.1.100.20.4.1.3
.1.3.6.1.4.1.7840.2.1.100.20.5 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscmdcPortbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscmdcPortbindingTable'
dcscm destination control multicast, Acl is binded to Port
dcscmdcPortbindingEntry row .1.3.6.1.4.1.7840.2.1.100.20.5.1
The index of this table is PortName
Column Syntax OID
dcscmdcPortbindingPortNameDcscm destination control multicast,The Port index of ruleSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.20.5.1.1
dcscmdcPortbindingAclNumberDcscm destination control multicast,The Acl number of rule;0 means del the rule binded to portInteger32r/w
Constraints:
range: 0-0
range: 6000-7999
.1.3.6.1.4.1.7840.2.1.100.20.5.1.2
.1.3.6.1.4.1.7840.2.1.100.20.8 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscmscPortbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscmscPortbindingTable'
dcscm destination control multicast, Acl is binded to Port
dcscmscPortbindingEntry row .1.3.6.1.4.1.7840.2.1.100.20.8.1
The index of this table is PortName
Column Syntax OID
dcscmscPortbindingPortNameDcscm source control multicast,The Port Number of ruleSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.20.8.1.1
dcscmscPortbindingAclNumberDcscm source control multicast,The Acl number of rule ; 0 means to del the rule binded to portInteger32r/w
Constraints:
range: 0-0
range: 5000-5099
.1.3.6.1.4.1.7840.2.1.100.20.8.1.2

dcscmpcTable

table
.1.3.6.1.4.1.7840.2.1.100.20.9 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscmpcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscmpcTable'
dcscm policy multicast table
dcscmpcEntry row .1.3.6.1.4.1.7840.2.1.100.20.9.1
The index of this table is dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen
Column Syntax OID
dcscmpcSourceIpsource ip address of policy multicastSNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.20.9.1.1
dcscmpcSourceMasklenMask length of source IpSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.20.9.1.2
dcscmpcDestinationIpDestination ip address of policy multicast,the destination ip must be a valid multicast group address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.20.9.1.3
dcscmpcDestinationMasklenMask length of destination IpSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.20.9.1.4
dcscmpccoscos value of policy multicast; between 0 and 7 ;8 means to del the policyInteger32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.7840.2.1.100.20.9.1.5
.1.3.6.1.4.1.7840.2.1.100.21.3 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscm6VMacbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscm6VMacbindingTable'
dcscm6 destination control multicast, Acl is binded to VMac
dcscm6VMacbindingEntry row .1.3.6.1.4.1.7840.2.1.100.21.3.1
The index of this table is Vlanid,MacAddress
Column Syntax OID
dcscm6VMacbindingVlanidDcscm6 destination control multicast,The vlanid of ruleInteger32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.21.3.1.1
dcscm6VMacbindingMacAddrDcscm6 destination control multicast,The Mac Address of ruleOctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.21.3.1.2
dcscm6VMacbindingAclNumberDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to vmacInteger32r/w
Constraints:
range: 0-0
range: 9000-10999
.1.3.6.1.4.1.7840.2.1.100.21.3.1.3
.1.3.6.1.4.1.7840.2.1.100.21.4 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscm6SipbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscm6SipbindingTable'
dcscm6 destination control multicast, Acl is binded to Sip
dcscm6SipbindingEntry row .1.3.6.1.4.1.7840.2.1.100.21.4.1
The index of this table is Sourceip,SourceMaskLen
Column Syntax OID
dcscm6SipbindingSipAddressDcscm6 destination control multicast,The Source ip of ruleIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.7840.2.1.100.21.4.1.1
dcscm6SipbindingSipMaskLenDcscm6 destination control multicast,The Source ip mask len of ruleInteger32
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.21.4.1.2
dcscm6SipbindingAclNumberDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to sipInteger32r/w
Constraints:
range: 0-0
range: 9000-10999
.1.3.6.1.4.1.7840.2.1.100.21.4.1.3
.1.3.6.1.4.1.7840.2.1.100.21.5 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscm6dcPortbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscm6dcPortbindingTable'
dcscm6 destination control multicast, Acl is binded to Port
dcscm6dcPortbindingEntry row .1.3.6.1.4.1.7840.2.1.100.21.5.1
The index of this table is PortName
Column Syntax OID
dcscm6dcPortbindingPortNameDcscm6 destination control multicast,The Port Number of ruleSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.21.5.1.1
dcscm6dcPortbindingAclNumberDcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to portInteger32r/w
Constraints:
range: 0-0
range: 9000-10999
.1.3.6.1.4.1.7840.2.1.100.21.5.1.2
.1.3.6.1.4.1.7840.2.1.100.21.8 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscm6scPortbindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscm6scPortbindingTable'
dcscm6 destination control multicast, Acl is binded to Port
dcscm6scPortbindingEntry row .1.3.6.1.4.1.7840.2.1.100.21.8.1
The index of this table is PortName
Column Syntax OID
dcscm6scPortbindingPortNameDcscm6 source control multicast,The Port Number of ruleSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.21.8.1.1
dcscm6scPortbindingAclNumberDcscm6 source control multicast,The Acl number of rule,0 means to del the rule binded to portInteger32r/w
Constraints:
range: 0-0
range: 8000-8099
.1.3.6.1.4.1.7840.2.1.100.21.8.1.2
.1.3.6.1.4.1.7840.2.1.100.21.9 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dcscm6pcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dcscm6pcTable'
dcscm6 policy multicast table
dcscm6pcEntry row .1.3.6.1.4.1.7840.2.1.100.21.9.1
The index of this table is dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask
Column Syntax OID
dcscm6pcSourceIpsource ip address of policy multicastIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.7840.2.1.100.21.9.1.1
dcscm6pcSourceMaskSource MaskLen of policy multicastInteger32
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.21.9.1.2
dcscm6pcDestinationIpDestination ip address of policy multicastIpv6Address
Type Constraints:
range: 16
.1.3.6.1.4.1.7840.2.1.100.21.9.1.3
dcscm6pcDestinationMaskDestination MaskLen of policy multicastInteger32
Constraints:
range: 8-128
.1.3.6.1.4.1.7840.2.1.100.21.9.1.4
dcscm6pccoscos value of policy multicast; between 0 and 7 ;8 means to del the policyInteger32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.7840.2.1.100.21.9.1.5
.1.3.6.1.4.1.7840.2.1.100.22.4.3 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk clusterv2MemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::clusterv2MemberTable'
This table contains one row per cluster member,
including the command switch,read only on commander.
clusterv2MemberEntry row .1.3.6.1.4.1.7840.2.1.100.22.4.3.1
An entry containing cluster management information
applicable to a particular cluster member.
Column Syntax OID
clusterv2MemberNumberAn arbitrary value which uniquely identifies the
cluster member switch number. It ranges from 1 to
clusterv2StatusMaxNumberOfMembers,read only on commander.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.1
clusterv2MemberIpAddressThe management ip address of the member device.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.2
clusterv2MemberOperStatusThe status of cluster management connectivity between
the command switch and a cluster member. Cluster management
connectivity is determined by the exchange of cluster
management messages between the command switch and …
Enumeration
Enumerated Values:
1notMember
2inactiveMember
3memberTobe
4activeMember
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.3
clusterv2MemberMacAddressThe management MAC address of the member device.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.4
clusterv2MemberHostNameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.5
clusterv2MemberDeviceTypedeviceType such as 5526S, 2008A etcOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.22.4.3.1.6
.1.3.6.1.4.1.7840.2.1.100.22.4.5 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk clusterv2CandidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::clusterv2CandidateTable'
This table contains one row per cluster candidate,
A cluster candidate is a device that is currently
eligible to be added to the cluster of a command
switch.  A device is eligible if it satisfies the
following conditions:
1. It start the cluster func.
2. It is in a same L2 LAN with commander switch
          
The entries in this table and the entries in 
clusterMemberTable are mutually exclusive at all
times.  That is, any device that is a cluster
member never shows up in the clusterCandidateTable
or is never a candidate at the same time .  Also, any 
candidate that shows up in clusterCandidateTable should not
appear in clusterMemberTable.
clusterv2CandidateEntry row .1.3.6.1.4.1.7840.2.1.100.22.4.5.1
An entry pertaining to a single candidate device.
Column Syntax OID
clusterv2CandidateIdThe candidate id.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.22.4.5.1.1
clusterv2CandidateMacAddressThe MAC address of a device qualified to
to be a cluster member of the command switch
cluster.
OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.22.4.5.1.2
clusterv2CandidateHostNameOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.22.4.5.1.3
clusterv2CandidateDeviceTypeOctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.22.4.5.1.4
.1.3.6.1.4.1.7840.2.1.100.23.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dnsServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dnsServerTable'
The dns server list table which consists of a sequence of 'dnsServerEntry' items which describe
the configured dns server IP information.
dnsServerEntry row .1.3.6.1.4.1.7840.2.1.100.23.2.1
An entry in the dnsServerTable containing the dns server IP.
Column Syntax OID
dnsServerInetAddrTypeThe IP address type of dnsServerEntry. This value applies to dnsServerIpAddr.InetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
.1.3.6.1.4.1.7840.2.1.100.23.2.1.1
dnsServerIpAddrThe dns server IP address with 'dnsServerInetAddrType' to indicate the IP address type(IPv4 or IPv6).InetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.7840.2.1.100.23.2.1.2
dnsServerPriorityCurrent Priority of the dns server.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.7840.2.1.100.23.2.1.3
dnsServerStatusCurrent state of the dns server.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.23.2.1.4
.1.3.6.1.4.1.7840.2.1.100.23.3 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dnsDomainSuffixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dnsDomainSuffixTable'
The dns domain suffix table which consists of a sequence of 'dnsDomainSuffixEntry' items which describe
the configured dns domain suffix information.
dnsDomainSuffixEntry row .1.3.6.1.4.1.7840.2.1.100.23.3.1
An entry in the dnsDomainSuffixTable containing the dns domain suffix.
Indexes
Column Syntax OID
dnsDomainSuffixThe dns domain suffix(e.g. commpany.com).DisplayString.1.3.6.1.4.1.7840.2.1.100.23.3.1.1
dnsDomainSuffixStatusCurrent state of the dns domain suffix.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.23.3.1.2
.1.3.6.1.4.1.7840.2.1.100.23.4 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dnsDynHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dnsDynHostTable'
The dns dynamic host table which consists of a sequence of 'dnsDynHostEntry' items which describe
the resolved dns dynamic host information.
dnsDynHostEntry row .1.3.6.1.4.1.7840.2.1.100.23.4.1
An entry in the dnsDynHostTable containing the dns dynamic host information.
Indexes
Column Syntax OID
dnsDynHostIndexIndex of position in the cacheSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.23.4.1.1
dnsDynHostNameThe dns dynamic host name(e.g. www.sina.com.cn).DisplayString.1.3.6.1.4.1.7840.2.1.100.23.4.1.2
dnsDynHostIpAddrThe dns dynamic host's IP address with 'dnsDynHostInetAddrType' to indicate the IP address type(IPv4 or IPv6).InetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.7840.2.1.100.23.4.1.3
dnsDynHostTtlThe dns dynamic host's living time(seconds).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.23.4.1.4
.1.3.6.1.4.1.7840.2.1.100.26.10 · 1 row entry · 9 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk poePortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::poePortConfigTable'
The power inline port configuration table
poePortConfigEntry row .1.3.6.1.4.1.7840.2.1.100.26.10.1
The power inline configuration in port.
Indexes
Column Syntax OID
poePortIndexThe power inline port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.26.10.1.1
poePortStatusThe power inline port switch. Enable expresses it is turned on, while disable indicates that off.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.26.10.1.2
poePortPriorityThe power inline port priority.Enumerationr/w
Enumerated Values:
0critical
1high
2low
.1.3.6.1.4.1.7840.2.1.100.26.10.1.3
poePortMaxPowerThe power inline port available power whitch cannot be exceeded by the connected PD.Integer32r/w
Constraints:
range: 1-31000
.1.3.6.1.4.1.7840.2.1.100.26.10.1.4
poePortCurrentPowerThe power inline port used power. It is a real time value.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.26.10.1.5
poePortCurrentCurrentThe power inline port export current. It is a real time value.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.26.10.1.6
poePortCurrentVoltageThe power inline port export voltage. It is a real time value.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.26.10.1.7
poePortPdStatusThe power inline detect status. on(1):PD is connected and natural powered, off(2):PD is not connected,
faulty(3):error, deny(4):power is low or high.
Enumeration
Enumerated Values:
1on
2off
3faulty
4deny
.1.3.6.1.4.1.7840.2.1.100.26.10.1.8
poePortPdClassThe connected PD class of power inlineSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.26.10.1.9
.1.3.6.1.4.1.7840.2.1.100.27.1.12 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk qos2ServicePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::qos2ServicePolicyTable'
QoS service policy table.
qos2ServicePolicyEntry row .1.3.6.1.4.1.7840.2.1.100.27.1.12.1
QoS service policy table.
Column Syntax OID
qos2PolicyMapNamePolicy map name<1-64>.OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.7840.2.1.100.27.1.12.1.1
qos2ServicePolicyVlanListVlan list.DisplayString.1.3.6.1.4.1.7840.2.1.100.27.1.12.1.2
qos2ServicePolicyStatusSetting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.Enumerationr/w
Enumerated Values:
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.27.1.12.1.3
.1.3.6.1.4.1.7840.2.1.100.28.1 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk mabOnlineUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::mabOnlineUserTable'
Show the information of MAB users.
mabOnlineUserEntry row .1.3.6.1.4.1.7840.2.1.100.28.1.1
Column Syntax OID
mabOnlineUserIndexThe index of MAB user.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.28.1.1.1
mabOnlineUserMacThe mac of MAB user.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.28.1.1.2
mabOnlineUserNameThe username of MAB user.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.28.1.1.3
mabOnlineUserPortThe port for MAB user.OctetString
Constraints:
range: 1-14
.1.3.6.1.4.1.7840.2.1.100.28.1.1.4
mabOnlineUserStateThe state of MAB user.OctetString
Constraints:
range: 1-18
.1.3.6.1.4.1.7840.2.1.100.28.1.1.5
.1.3.6.1.4.1.7840.2.1.100.28.3 · 1 row entry · 8 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk dot1xOnlineUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::dot1xOnlineUserTable'
Show the information of dot1x users.
dot1xOnlineUserEntry row .1.3.6.1.4.1.7840.2.1.100.28.3.1
Column Syntax OID
dot1xOnlineUserIndexThe index of dot1x user.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.28.3.1.1
dot1xOnlineUserMacThe mac of dot1x user.OctetString
Constraints:
range: 17-17
.1.3.6.1.4.1.7840.2.1.100.28.3.1.2
dot1xOnlineUserNameThe name of dot1x user.OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.7840.2.1.100.28.3.1.3
dot1xOnlineUserPortThe port for dot1x user.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.28.3.1.4
dot1xOnlineUserPortVlanidThe vlan id of dot1x user.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.28.3.1.5
dot1xOnlineUserPortMethodThe port method dot1x user.OctetString
Constraints:
range: 1-20
.1.3.6.1.4.1.7840.2.1.100.28.3.1.6
dot1xOnlineUserPortControlThe port control for dot1x user.OctetString
Constraints:
range: 1-20
.1.3.6.1.4.1.7840.2.1.100.28.3.1.7
dot1xOnlineUserStateThe state of dot1x user.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.28.3.1.8
.1.3.6.1.4.1.7840.2.1.100.29.1 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portMacCountLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portMacCountLimitTable'
The Port Mac Count Limit information table.
portMacCountLimitEntry row .1.3.6.1.4.1.7840.2.1.100.29.1.1
The index of this table is port index.
Column Syntax OID
portMacCountLimitPortIndexPort Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.29.1.1.1
portMacCountLimitConfigNumConfigration of the maxmum dynamic mac can be learned on the port.Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.29.1.1.2
portMacCountLimitCurNumThe current number of the dynamic mac learned on the port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.29.1.1.3
portMacCountLimitDisableThe disable state of mac count limit on the port.the disable state can be set,but enable state is notEnumerationr/w
Enumerated Values:
0not-disable
1disable
.1.3.6.1.4.1.7840.2.1.100.29.1.1.4
portMacCountLimitViolationModeThe violation mode of port mac count reach the threshold.The default mode is protect,if you want to disable violation mode,you can
config protect mode.
Enumerationr/w
Enumerated Values:
1protect
2shutdown
4replace
.1.3.6.1.4.1.7840.2.1.100.29.1.1.5
portMacCountLimitShutRecoveryTimeThe recovery time of violation shutdown mode, the recovery time range is <5-3600>, the value 0 is to cancel recovery time, the value <1-4> is not allowed to config.Integer32r/w
Constraints:
range: 0-3600
.1.3.6.1.4.1.7840.2.1.100.29.1.1.6
.1.3.6.1.4.1.7840.2.1.100.30.1 · 1 row entry · 26 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ddmTranscDiagnosisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ddmTranscDiagnosisTable'
A list of  ddm transceiver diagnosis information.
ddmTranscDiagnosisEntry row .1.3.6.1.4.1.7840.2.1.100.30.1.1
entry for ddm transceiver diagnosis information.
Column Syntax OID
ddmDiagnosisIfIndexinterface NO.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.30.1.1.1
ddmDiagnosisTemperaturecurrent Temperature of the port,and the unit is C.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.30.1.1.2
ddmDiagTempHighAlarmThresholdHigh alarm threshold of Temperature.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.3
ddmDiagTempLowAlarmThresholdLow alarm threshold of Temperature.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.4
ddmDiagTempHighWarnThresholdHigh warn threshold of Temperature.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.5
ddmDiagTempLowWarnThresholdLow warn threshold of Temperature.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.6
ddmDiagnosisVoltagevoltage of the port,and the unit is V.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.30.1.1.7
ddmDiagVoltHighAlarmThresholdHigh alarm threshold of Voltage.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.8
ddmDiagVoltLowAlarmThresholdLow alarm threshold of Voltage.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.9
ddmDiagVoltHighWarnThresholdHigh warn threshold of Voltage.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.10
ddmDiagVoltLowWarnThresholdLow warn threshold of Voltage.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.11
ddmDiagnosisBiasbias of the port,the unit is mA.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.30.1.1.12
ddmDiagBiasHighAlarmThresholdHigh alarm threshold of Bias.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.13
ddmDiagBiasLowAlarmThresholdLow alarm threshold of Bias.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.14
ddmDiagBiasHighWarnThresholdHigh warn threshold of Bias.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.15
ddmDiagBiasLowWarnThresholdLow warn threshold of Bias.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.16
ddmDiagnosisRXPowerRXPower of the port,and the unit is dBM,if the value of RXPower is infinitesimal,then set it to '-'.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.30.1.1.17
ddmDiagRXPowerHighAlarmThresholdHigh alarm threshold of RXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.18
ddmDiagRXPowerLowAlarmThresholdLow alarm threshold of RXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.19
ddmDiagRXPowerHighWarnThresholdHigh warn threshold of RXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.20
ddmDiagRXPowerLowWarnThresholdLow warn threshold of RXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.21
ddmDiagnosisTXPowerTXPower of the port,and the unit is dBM,if the value of TXPoweris infinitesimal,then set it to '-'.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.7840.2.1.100.30.1.1.22
ddmDiagTXPowerHighAlarmThresholdHigh alarm threshold of TXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.23
ddmDiagTXPowerLowAlarmThresholdk=Low alarm threshold of TXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.24
ddmDiagTXPowerHighWarnThresholdHigh warn threshold of TXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.25
ddmDiagTXPowerLowWarnThresholdLow warn threshold of TXPower.OctetString
Constraints:
range: 1-16
.1.3.6.1.4.1.7840.2.1.100.30.1.1.26
.1.3.6.1.4.1.7840.2.1.100.30.2 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk ddmTranscAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::ddmTranscAlarmTable'
A list of  ddm transceiver alarm information.
ddmTranscAlarmEntry row .1.3.6.1.4.1.7840.2.1.100.30.2.1
entry for ddm transceiver alarm information.
Indexes
Column Syntax OID
ddmAlarmIfIndexinterface NO.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.30.2.1.1
ddmAlarmInfoddm transceiver alarm information.OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.7840.2.1.100.30.2.1.2
.1.3.6.1.4.1.7840.2.1.100.31.8 · 1 row entry · 6 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk priPppoeIaPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::priPppoeIaPortTable'
Pppoe-ia configuration in port.
priPppoeIaEntry row .1.3.6.1.4.1.7840.2.1.100.31.8.1
Pppoe-ia configuration in port.
Column Syntax OID
priPppoeIaPortIDThis value is port's ID.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.31.8.1.1
priPppoeIaPortEnableEnable or disable the pppoe-ia function of the port in the switch. Default:0.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.31.8.1.2
priPppoeIaPortCircuitIDConfig circuitId for the port. Default:NULL.OctetStringr/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.31.8.1.3
priPppoeIaPortRemoteIDConfig remoteId for the port. Default:NULL.OctetStringr/w
Constraints:
range: 0-63
.1.3.6.1.4.1.7840.2.1.100.31.8.1.4
priPppoeIaPortTrustEnable or disable the pppoe-ia trust function of the port in the switch. Default:0Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.31.8.1.5
priPppoeIaPortVendorTagStripEnable or disable the pppoe-ia vendorTag strip function of the port in the switch. Default:0Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.31.8.1.6
.1.3.6.1.4.1.7840.2.1.100.32.1 · 1 row entry · 11 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk newPortSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::newPortSecurityTable'
The Port Security information table.
newPortSecurityEntry row .1.3.6.1.4.1.7840.2.1.100.32.1.1
The index of this table is port index.
Column Syntax OID
portSecurityPortIndexSecure Port Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.32.1.1.1
portSecurityStateenable or disable port security on this port.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.32.1.1.2
portSecurityStickyenable or disable port security sticky on this port.If enable it,the port converts all the dynamic secure
MAC addresses, including those that were dynamically learned before sticky learning was enabled,to sticky
secur…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.7840.2.1.100.32.1.1.3
portSecurityMaxMacNumThe maximum number of security mac can be set or learned on the secure port.Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.32.1.1.4
portSecurityCurMacNumThe number of the current security mac on the secure port.Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.32.1.1.5
portSecurityCfgMacNumThe number of security mac can be set on the secure port.Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.32.1.1.6
portSecurityVioMacNumThe violation number of mac received on the secure port.Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.32.1.1.7
portSecurityAgingTimeThe aging time for secure address entries on the secure port.Integer32r/w
Constraints:
range: 1-1440
.1.3.6.1.4.1.7840.2.1.100.32.1.1.8
portSecurityAgingTypeThe aging type for secure address entries on the secure port.If you want to disable inactivity or static aging type,you can config default type.Enumerationr/w
Enumerated Values:
0default
1absolute
2inactivity
4static
5absolute-static
6inactivity-static
.1.3.6.1.4.1.7840.2.1.100.32.1.1.9
portSecurityVioModeThe violation mode of secure port mac count reach the threshold.The default mode is shutdown,if you want to disable violation mode,you can
config shutdown mode.
Enumerationr/w
Enumerated Values:
1protect
2restrict
3shutdown
.1.3.6.1.4.1.7840.2.1.100.32.1.1.10
portSecurityVioShutRecoveryTimeThe recovery time of violation shutdown mode, the recovery time range is <5-3600>, the value 0 is to cancel recovery time, the value <1-4> is not allowed to config.Integer32r/w
Constraints:
range: 0-3600
.1.3.6.1.4.1.7840.2.1.100.32.1.1.11
.1.3.6.1.4.1.7840.2.1.100.32.2 · 1 row entry · 4 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portSecurityVlanMaxNumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portSecurityVlanMaxNumTable'
Table of maximum mac number with vlan on security port, and the secure port must be on trunk mode.
portSecurityVlanMaxNumEntry row .1.3.6.1.4.1.7840.2.1.100.32.2.1
An entry in the port security maximum mac number with vlan table.
Column Syntax OID
portSecurityVlanPortIndexSecure Port Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.32.2.1.1
portSecurityVlanIndexThe vlan index on the secure port.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.32.2.1.2
portSecurityVlanMaxMacNumThe maximum number of security mac can be set or learned in the vlan on the secure port,
the maximum range is <1-4096>, the value 0 is to cancel maximum in this vlan,
and when you set the maximum number with one vlan th…
Integer32r/w
Constraints:
range: 0-4096
.1.3.6.1.4.1.7840.2.1.100.32.2.1.3
portSecurityVlanCurMacNumThe current number of security mac set or learned in the vlan on the secure port.Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.7840.2.1.100.32.2.1.4
.1.3.6.1.4.1.7840.2.1.100.32.3 · 1 row entry · 5 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk portSecurityMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::portSecurityMacAddressTable'
Table of mac address on security port.
portSecurityMacAddressEntry row .1.3.6.1.4.1.7840.2.1.100.32.3.1
An entry in the port security mac address table.
Column Syntax OID
portSecurityMacAddressPortIndexSecure Port Index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.7840.2.1.100.32.3.1.1
portSecurityMacAddressVlanIndexThe vlan index on the secure port.When set mac address,the vlan index must be zero if the port is on access mode.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.7840.2.1.100.32.3.1.2
portSecurityMacAddressSecure mac address on this secure portOctetString
Constraints:
range: 6-6
.1.3.6.1.4.1.7840.2.1.100.32.3.1.3
portSecurityMacTypeThe type of mac address on the secure port.Enumerationr/w
Enumerated Values:
16secured
32secures
64securec
.1.3.6.1.4.1.7840.2.1.100.32.3.1.4
portSecurityMacStatusCurrent state of the mac address.Enumerationr/w
Enumerated Values:
0createAndGo
1active
2destroy
.1.3.6.1.4.1.7840.2.1.100.32.3.1.5
.1.3.6.1.4.1.7840.2.1.100.33.1.1.8 · 1 row entry · 3 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk macNotificationHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::macNotificationHistoryTable'
This table will archive the MAC change notification events 
generated by this device. The MAC change notification
events are archived here even if macNotificationMacChangesNotifications 
are not actually sent.
macNotificationHistoryEntry row .1.3.6.1.4.1.7840.2.1.100.33.1.1.8.1
A MAC change notification message that was previously
generated by this device. Each entry is indexed by a message
index.
Column Syntax OID
macNotificationHistIndexAn index that uniquely identifies a MAC change notification
event previously generated by the device. This index starts at
1 and increases by one when a MAC change notification is
generated. When it reaches the maximu…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.7840.2.1.100.33.1.1.8.1.1
macNotificationHistMacChangedMsgThis object contains the information of a MAC change
notification event. It consists of several tuples packed
together in the format of '<tuple1><tuple2>...'.

Each tuple consist of 11 octets in the format…
OctetString
Constraints:
range: 1-254
.1.3.6.1.4.1.7840.2.1.100.33.1.1.8.1.2
macNotificationHistTimestampThe value of sysUpTime when the macNotificationMacChangedNotification
containing the information denoted by the macNotificationHistMacChangedMsg
object in this entry was generated.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.7840.2.1.100.33.1.1.8.1.3
.1.3.6.1.4.1.7840.2.1.100.33.1.2.1 · 1 row entry · 2 columns
Uses the zelax variant from /opt/observium/mibs/zelax.
Command help
Walk macNotificationIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZELAX-MIB' -M '/opt/observium/mibs/zelax:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZELAX-MIB::macNotificationIfConfigTable'
This table enables or disables the generation of notification
at each interface when MAC address is learnt or removed.
macNotificationIfConfigEntry row .1.3.6.1.4.1.7840.2.1.100.33.1.2.1.1
Each entry contains the configuration for enabling the
MAC notification at each interface that supports this
feature.
Indexes
ifIndex
Column Syntax OID
macNotificationMacAddrLearntEnableIndicates whether this interface is enabled to send
macNotificationMacChangedNotification when it learns a new MAC address. This
variable has no effect when the value of macNotificationGlobalFeatureEnabled
object is fa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7840.2.1.100.33.1.2.1.1.1
macNotificationMacAddrRemovedEnableIndicates whether this interface is enabled to send
macNotificationMacChangedNotification when a MAC address which it learnt
previously is removed from the forwarding table. This variable
has no effect when the value o…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.7840.2.1.100.33.1.2.1.1.2