wwpOamErrFrameSecsEvNotifEnable
WWP-OAM-MIB ·
.1.3.6.1.4.1.6141.2.400.1.2.6.1.10
Object
column
r/w
Enumeration
Indicates whether the occurence of an Errored Frame Seconds
Summary Event should result in an Event Notification OAMPDU
generated by the OAM layer.
By default, this object should have the value disabled(2) for
Ethernet like interfaces that support OAM. If the OAM layer
does not support event notifications (as indicated via the
wwpOamFunctionsSupported attribute), this value is ignored.
Context
- MIB
- WWP-OAM-MIB
- OID
.1.3.6.1.4.1.6141.2.400.1.2.6.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpOamEventConfigEntry
- Table
- wwpOamEventConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpOamEventPort An Ethernet port on the switch | column | Integer32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.1 |
| wwpOamDyingGaspEnable Indicates whether the local device should attempt to indicate
a dying gasp fault via the OAMPDU flags field to its peer OAM
entity. If the system does not support dying gasp capa… | column | Enumeration | .1.3.6.1.4.1.6141.2.400.1.2.6.1.11 |
| wwpOamCriticalEventEnable Indicates whether the local device should attempt to indicate
a critical event fault via the OAMPDU flags field to its peer
OAM entity. If the system does not support critical ev… | column | Enumeration | .1.3.6.1.4.1.6141.2.400.1.2.6.1.12 |
| wwpOamErrFramePeriodWindow The number of frames over which the threshold is defined.
The default value of the window is the number of minimum size
Ethernet frames that can be received over the physical lay… | column | frames SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.2 |
| wwpOamErrFramePeriodThreshold The number of frame errors that must occur for this event to
be triggered. The default value is one frame error.
If wwpOamErrFramePeriodThreshold… | column | frames SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.3 |
| wwpOamErrFramePeriodEvNotifEnable Indicates whether the occurence of an Errored Frame Period
Event should result in an Event Notification OAMPDU generated
by the OAM layer.
By defa… | column | Enumeration | .1.3.6.1.4.1.6141.2.400.1.2.6.1.4 |
| wwpOamErrFrameWindow The amount of time (in 100ms increments) over which the
threshold is defined. The default value is 10 (1 second).
If wwpOamErrFrameThreshold fram… | column | tenths of a second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.5 |
| wwpOamErrFrameThreshold The number of frame errors that must occur for this event to
be triggered. The default value is one frame error.
If wwpOamErrFrameThreshold frame… | column | frames SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.6 |
| wwpOamErrFrameEvNotifEnable Indicates whether the occurence of an Errored Frame Event
should result in an Event Notification OAMPDU generated by the
OAM layer.
By default, th… | column | Enumeration | .1.3.6.1.4.1.6141.2.400.1.2.6.1.7 |
| wwpOamErrFrameSecsSummaryWindow The amount of time (in 100ms intervals) over which the
threshold is defined. The default value is 600 (60 seconds).
If wwpOamErrFrameSecsSummaryT… | column | tenths of a second Integer32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.8 |
| wwpOamErrFrameSecsSummaryThreshold The number of errored frame seconds that must occur for this
event to be triggered. The default value is one errored frame
second.
If wwpOamErrFr… | column | errored frame seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.400.1.2.6.1.9 |