wwpLeosVplsEncapTunnelRowStatus

WWP-LEOS-VPLS-MIB · .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
Setting this object to 'createAndGo' will create the entry
in the table.
Setting this object to 'destroy' will delete the entry
from the table.
Refer to description of wwpLeosVplsEncapTunnelTable for details of
creating and deleting entries in the table.

Context

MIB
WWP-LEOS-VPLS-MIB
OID
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16
Type
column
Access
readwrite
Status
current
Parent
wwpLeosVplsEncapTunnelEntry
Table
wwpLeosVplsEncapTunnelTable
Siblings
23

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wwpLeosVplsEncapTunnelId
This object specifies the unique index used in the table.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.1
wwpLeosVplsEncapTunnelProtType
Setting this object at the time of entry creation will specify the type of Protocol to be used for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dy…
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.10
wwpLeosVplsEncapTunnelDestResolvedMac
This object specifies the resolved mac address for given destination IP (wwpLeosVplsEncapTunnelDestIp).
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.11
wwpLeosVplsEncapTunnelOperStatus
This mib object represents the operational status of tunnel.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.12
wwpLeosVplsEncapTunnelAdminStatus
This mib object represents the administrative status of tunnel.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13
wwpLeosVplsEncapTunnelDestResolvedPort
This mib object represents the resolved port number to destination.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.14
wwpLeosVplsEncapTunnelDestResolvedVlan
This mib object represents the resolved transport vlan to destination.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.15
wwpLeosVplsEncapTunnelFastReroute
This object specifies if the backup tunnel should provide link or node protection. This object should only be specified if wwpLeosVplsEncapTunnelType = dynamic and wwpLeosVplsEnca…
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.17
wwpLeosVplsEncapTunnelLspType
This object specifies if the tunnel lsp is primary or backup tunnel.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.18
wwpLeosVplsEncapTunnelPartnerTunnelId
This object specifies if the partner tunnel ID.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.19
wwpLeosVplsEncapTunnelName
This object specfies the name assigned to this tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.…
columnOctetString.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.2
wwpLeosVplsEncapTunnelBVID
This object specifies the provider backbone bridge vlan. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.
columnVlanId.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.20
wwpLeosVplsEncapTunnelDestBridgeIndex
This object specifies the provider backbone bridge index. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored. …
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.21
wwpLeosVplsEncapTunnelEgressPort
This object specifies the provider backbone bridge port. This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object will be ignored.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.22
wwpLeosVplsEncapTunnelEncapFixedPCP
This object specifies the encap fixed PCP assigned to this tunnel.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.23
wwpLeosVplsEncapTunnelActive
This object specifes if the tunnel is active, and it is only valid if TunnelType is staticPbt.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.24
wwpLeosVplsEncapTunnelType
This object specifies the type of tunnel. This object can only be specified while creating entry in the table and cannot be modified after the entry has been created.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.3
wwpLeosVplsEncapTunnelDestAddr
This object specifies the IP address used to resolve this tunnel. This object is only applicable if wwpLeosVplsEncapTunnelType not equal to staticPbt.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.4
wwpLeosVplsEncapTunnelPathIndex
This object specifies the path that this tunnel is supposed to use signal labels for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.5
wwpLeosVplsEncapTunnelEncapCosPolicy
This object specifies the PBT encapsulated cos policy assigned to this tunnel. inheritVC and inheritVs options are deprecated and should not be used. rcos-mapped option should be …
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.6
wwpLeosVplsEncapTunnelEncapFixedExp
This object specifies the encap fixed EXP assigned to this tunnel.
columnInteger32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.7
wwpLeosVplsEncapTunnelTTLPolicy
This object specifies the TTL policy for given tunnel.
columnEnumeration.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.8
wwpLeosVplsEncapTunnelEncapLabel
This mib object specifies the encap label assigned to this tunnel. If the label is not yet known (signaling in process), the object should return a value of 0xFFFF.
columnUnsigned32.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.9