wwpLeosVplsEncapTunnelTable

WWP-LEOS-VPLS-MIB · .1.3.6.1.4.1.6141.2.60.28.1.1.13

Object

table

This table represents the encap tunnels for VPLS.
To create STATIC encap tunnel following objects must be set
Encap and Decap Tunnel name cannot be same but indexes can be
wwpLeosVplsEncapTunnelName must be specified.
wwpLeosVplsEncapTunnelEncapLabel must be specified (0, 32..1023)
wwpLeosVplsEncapTunnelType must be set to static
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo

To create DYNAMIC encap tunnel following objects must be set
wwpLeosVplsEncapTunnelName must be specified
wwpLeosVplsEncapTunnelType must be set to dynamic
wwpLeosVplsEncapTunnelProtType must be set to rsvp
wwpLeosVplsEncapTunnelPathName must be specified, this path must
exist in wwpLeosVplsMplsPathTable
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo.
wwpLeosVplsEncapTunnelFastReroute must be set if wanted to use fast reroute
wwpLeosVplsEncapTunnelLspType must be specified, if not specified then it will be assumed primary

To create DYNAMIC encap backup tunnel following objects must be set
wwpLeosVplsEncapTunnelName must be set to primary tunnel name that this tunnel is backing up.
wwpLeosVplsEncapTunnelType must be set to dynamic
wwpLeosVplsEncapTunnelProtType must be set to rsvp
wwpLeosVplsEncapTunnelPathName must be specified, this path must
exist in wwpLeosVplsMplsPathTable
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo.

To create static PBT encap tunnel following objects must be set
wwpLeosVplsEncapTunnelName must be specified
wwpLeosVplsEncapTunnelType must be set to staticPbt
wwpLeosVplsEncapTunnelBVID must be specified
wwpLeosVplsEncapTunnelRowStatus must be set to createAndGo.
wwpLeosVplsEncapTunnelDestBridgeIndex must be set
wwpLeosVplsEncapTunnelEgressPort must be specified

Context

MIB: WWP-LEOS-VPLS-MIB
OID: .1.3.6.1.4.1.6141.2.60.28.1.1.13
Type: table
Status: current
Parent: wwpLeosVpls
Siblings: 36
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wwpLeosVplsVirtualCircuitTable deprecated The (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be used because following MIB objects needs to be set while creatin…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.1`
wwpLeosVplsMplsPathTable Mpls Path table used to represent the explicit path for RSVP tunnels.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.10`
wwpLeosVplsMplsPathMemberTable Table specifies the list of IP addresses (Hops) to get to the destination PE.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.11`
wwpLeosVplsRsvpAttrTable RSVP Attr Table used by MPLS wwpLeosVplsEncapTunnelTable Tunnels when wwpLeosVplsEncapTunnelProtType = rsvp. Whenever entry is created in the wwpLeosVplsEncapTunnelTable table wit…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.12`
wwpLeosVplsDecapTunnelTable This table represents the Decap tunnels for VPLS wwpLeosVplsDecapTunnelType If not set will default to static To create STATIC Decap tunnel following objects…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.14`
wwpLeosVplsVirtualCircuitMplsTable The (conceptual) table listing the mpls virtual circuit table. To create entry use SNMP, multiple set operation must be used. Following Mib objects must be specified while creatin…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.15`
wwpLeosVplsVirtualCircuitMplsStatsTable The (conceptual) table listing the mpls virtual circuit stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.16`
wwpLeosVplsVirtualCircuitEthTable The (conceptual) table listing the virtual circuit table. To create entry use SNMP, multiple set operation must be usedd because following mib objects needs to be set while creati…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.17`
wwpLeosVplsVirtualCircuitEtherTypeTable The (conceptual) table listing the ether type to be used for each port.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.18`
wwpLeosVplsVirtualCircuitEthStatsTable The (conceptual) table listing the virtual circuit stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.19`
wwpLeosVplsVirtualSwitchMplsTable This table is used to manage virtual switch entries on the device.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.20`
wwpLeosVplsVirtualSwitchMplsMemberTable deprecated This table is used to create mpls virtual switch subscriber port-vlan membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.21`
wwpLeosVplsVirtualSwitchMplsMemberStatsTable deprecated The (conceptual) table listing the virtual switch member stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.22`
wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable This table is used to create mpls virtual switch mesh-vc membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.23`
wwpLeosVplsVirtualSwitchMplsMemberAcVcTable This table is used to create mpls virtual switch mesh-vc membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.24`
wwpLeosVplsSwitchMplsCtrlProtocolTable The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.25`
wwpLeosVplsVirtualSwitchEthTable This table is used to manage virtual switch entries on the device.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.26`
wwpLeosVplsVirtualSwitchEthMemberTable deprecated This table is used to create virtual switch membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.27`
wwpLeosVplsVirtualSwitchEthMemberStatsTable deprecated The (conceptual) table listing the virtual switch member stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.28`
wwpLeosVplsSwitchEthCtrlProtocolTable The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.29`
wwpLeosVplsVirtualSwitchEtypeTranslationTable This table controls the global Ethertype translation functions. Only two entries are allowed. Creating more than two entries will return an error. The control is bi-directional.…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.30`
wwpLeosVplsTunnelPairTable This table allows creating tunnel pairs. Having a tunnel pair will force the device to accept pbt encapsulated frames on given pair of tunnels ports and not on any port. This tabl…	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.31`
wwpLeosVplsVirtualSwitchMplsEvplMemberTable This table is used to create mpls virtual switch subscriber port-vlan membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.32`
wwpLeosVplsVirtualSwitchMplsEvplMemberStatsTable The (conceptual) table listing the virtual switch member stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.33`
wwpLeosVplsVirtualSwitchEthEvplMemberTable This table is used to create virtual switch membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.34`
wwpLeosVplsVirtualSwitchEthEvplMemberStatsTable The (conceptual) table listing the virtual switch member stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.35`
wwpLeosVplsVirtualCircuitEthTotalStatsTable The (conceptual) table listing the virtual circuit stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.36`
wwpLeosVplsVirtualCircuitMplsTotalStatsTable The (conceptual) table listing the mpls virtual circuit stats table.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.37`
wwpLeosVplsVirtualSwitchEthL2CftProtocolTable Table of Virtual Switch L2 CFT protocols.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.49`
wwpLeosVplsVirtualSwitchTable deprecated This table is used to manage virtual switch entries on the device.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.5`
wwpLeosVplsVirtualSwitchCFTProtoStatsTable The (conceptual) table listing the l2 control frame protocol stats for a given vlan.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.50`
wwpLeosVplsVirtualSwitchCFTProtoTotalStatsTable The (conceptual) table listing the l2 control frame protocol stats for a given vlan.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.51`
wwpLeosVplsVirtualSwitchMemberTable deprecated This table is used to create virtual switch membership entry.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.6`
wwpLeosVplsSwitchCtrlProtocolTable deprecated The (conceptual) table listing the l2 virtual switch control frame protocol status tunnel for a given Vpls.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.7`
wwpLeosVplsSwitchReservedVlanTable The (conceptual) table listing the reserved Vlans used for virtual switch.	table	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.8`
wwpLeosVplsGlobalAttrs	node	-	`.1.3.6.1.4.1.6141.2.60.28.1.1.9`

Child Objects