wwpLeosVplsEncapTunnelAdminStatus
WWP-LEOS-VPLS-MIB ·
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13
Object
column
r/w
Enumeration
This mib object represents the administrative status of tunnel.
Context
- MIB
- WWP-LEOS-VPLS-MIB
- OID
.1.3.6.1.4.1.6141.2.60.28.1.1.13.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosVplsEncapTunnelEntry
- Table
- wwpLeosVplsEncapTunnelTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsEncapTunnelId This object specifies the unique index used in the table. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.1 |
| wwpLeosVplsEncapTunnelProtType Setting this object at the time of entry creation will specify the type of Protocol
to be used for this tunnel. This object is only used if wwpLeosVplsEncapTunnelType
is set to dy… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.10 |
| wwpLeosVplsEncapTunnelDestResolvedMac This object specifies the resolved mac address for given destination IP
(wwpLeosVplsEncapTunnelDestIp). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.11 |
| wwpLeosVplsEncapTunnelOperStatus This mib object represents the operational status of tunnel. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.12 |
| wwpLeosVplsEncapTunnelDestResolvedPort This mib object represents the resolved port number
to destination. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.14 |
| wwpLeosVplsEncapTunnelDestResolvedVlan This mib object represents the resolved transport vlan
to destination. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.15 |
| wwpLeosVplsEncapTunnelRowStatus Setting this object to 'createAndGo' will create the entry
in the table.
Setting this object to 'destroy' will delete the entry
from the table.
Refer to description of wwpLeosVpls… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.16 |
| wwpLeosVplsEncapTunnelFastReroute This object specifies if the backup tunnel should provide link or node protection.
This object should only be specified if wwpLeosVplsEncapTunnelType = dynamic and
wwpLeosVplsEnca… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.17 |
| wwpLeosVplsEncapTunnelLspType This object specifies if the tunnel lsp is primary or backup tunnel. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.18 |
| wwpLeosVplsEncapTunnelPartnerTunnelId This object specifies if the partner tunnel ID. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.19 |
| wwpLeosVplsEncapTunnelName This object specfies the name assigned to this tunnel.
This object can only be specified while creating entry in the table
and cannot be modified after the entry has been created.… | column | OctetString | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.2 |
| wwpLeosVplsEncapTunnelBVID This object specifies the provider backbone bridge vlan.
This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object
will be ignored. | column | VlanId | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.20 |
| wwpLeosVplsEncapTunnelDestBridgeIndex This object specifies the provider backbone bridge index.
This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object
will be ignored.
… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.21 |
| wwpLeosVplsEncapTunnelEgressPort This object specifies the provider backbone bridge port.
This object is only applicable if wwpLeosVplsEncapTunnelType is set to staticPbt otherwise this object
will be ignored. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.22 |
| wwpLeosVplsEncapTunnelEncapFixedPCP This object specifies the encap fixed PCP assigned to this tunnel. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.23 |
| wwpLeosVplsEncapTunnelActive This object specifes if the tunnel is active, and it is only valid
if TunnelType is staticPbt. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.24 |
| wwpLeosVplsEncapTunnelType This object specifies the type of tunnel.
This object can only be specified while creating entry in the table
and cannot be modified after the entry has been created. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.3 |
| wwpLeosVplsEncapTunnelDestAddr This object specifies the IP address used to resolve this tunnel.
This object is only applicable if wwpLeosVplsEncapTunnelType not equal to
staticPbt. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.4 |
| wwpLeosVplsEncapTunnelPathIndex This object specifies the path that this tunnel is supposed to use
signal labels for this tunnel.
This object is only used if wwpLeosVplsEncapTunnelType is set to dynamic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.5 |
| wwpLeosVplsEncapTunnelEncapCosPolicy This object specifies the PBT encapsulated cos policy assigned to this tunnel. inheritVC
and inheritVs options are deprecated and should not be used. rcos-mapped option should
be … | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.6 |
| wwpLeosVplsEncapTunnelEncapFixedExp This object specifies the encap fixed EXP assigned to this tunnel. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.7 |
| wwpLeosVplsEncapTunnelTTLPolicy This object specifies the TTL policy for given tunnel. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.8 |
| wwpLeosVplsEncapTunnelEncapLabel This mib object specifies the encap label assigned to this tunnel.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF. | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.13.1.9 |