channelWidth
WNAP320 ·
.1.3.6.1.4.1.4526.100.7.9.2.1.1.17
Object
column
r/w
Enumeration
This attribute shall set the CWM mode to 20Mhz or 40Mhz or automatically switches between 20 and 40 based on channel conditions. For 11ng mode, the default value is static20Mhz(0), when the channel is auto.
Context
- MIB
- WNAP320
- OID
.1.3.6.1.4.1.4526.100.7.9.2.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wlanSettingEntry
- Table
- wlanSettingTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | static20Mhz |
1 | static40Mhz |
2 | dynamic20-40 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlanIndex Specifies one of the 2 wireless profiles. | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.1 |
| dtimInterval This attribute shall indicate the beacon delivery traffic
indication message period in multiples of beaconInterval.
The default value is 3. | column | Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.10 |
| preambleType This attribute shall indicate the preamble setting.
This setting is only applicable to 802.11b, 802.11bg
and 802.11ng modes. When set to auto(0), depending on
the station type, A… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.11 |
| txPower This attribute shall indicate the transmit power.
The default value is full(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.12 |
| accessControlMode The field indicates whether the access control list is
enabled and the source of the database of the access
control list. | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.13 |
| rogueApDetection This attribute shall indicate the status of Rogue AP detection.
The default value is disable(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.14 |
| mcsRate This attribute shall indicate the transmit rate to be used
in case of 11ng modes. Rate index of 0 means 15 Mbps
when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps
whe… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.15 |
| guardInterval This attribute shall indicate the guard interval. When set to auto(0),
depending on the station type, AP selects 400ns or 800ns guard interval.
The default value is auto(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.16 |
| ampdu This attribute shall enable or disable AMPDU aggregation.
It is enabled by default. | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.18 |
| ampduAggrLength This attribute shall set the AMPDU aggregation length.
The default value is 65535. | column | Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.19 |
| operateMode This attribute shall indicate the desired wireless operating mode.
The option are:
dot11b - All 802.11b wireless stations can be used.
802.11g wireless stations can still be use… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.2 |
| rifsTransmission This attribute sets the status of rifsTransmission.
The default value of the attribute is disable(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.20 |
| apMode Specifies the device operation mode.
ap: device operates as an Access Point
p2p: device operates as a point-to-point wireless bridge
No STA are associated to the device in t… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.21 |
| uapsdStatus This attribute shall indicate whether wmm power save.
The default value is enable(1) . | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.22 |
| maxClientAssociations This attribute shall indicates the max wireless clients that allowed to
associated.When the value is set 0,and the wireless clients are not limited | column | Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.23 |
| rogueApDetectionPolicy This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP.
If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggr… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.24 |
| clientIsolation This attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.25 |
| radioStatus This attribute shall indicate the status of radio.
The default value is enable(1). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.3 |
| channel This attribute shall indicate the channel number to be
used. The default value is auto(0). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.4 |
| dataRate This attribute shall indicate the transmit rate applicable to
802.11b, 802.11bg and 802.11n modes. When the operateMode is:
dot11b(0) - can set to 0:best, 2:1Mb/s,… | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.5 |
| wmmSupport This field indicates the status of WMM(Wireless Multimedia) suport.
The default value is enable(1). | column | Enumeration | .1.3.6.1.4.1.4526.100.7.9.2.1.1.6 |
| beaconInterval This attribute shall indicate the Beacon Interval.
The default value is 100. | column | 1024 microsecond Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.7 |
| rtsThreshold This attribute shall indicate the RTS threshold.
The default value is 2347. | column | Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.8 |
| fragLength This attribute shall indicate the fragmentation threshold.
The default value is 2346. | column | Integer32 | .1.3.6.1.4.1.4526.100.7.9.2.1.1.9 |