WNAP320 Table View

Table-centric layout grouping table, row, and column objects.

Tables
14
Rows
14
Columns
182
.1.3.6.1.4.1.4526.100.7.9.2.1 · 1 row entry · 25 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wlanSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wlanSettingTable'
wireless interface settings table.
wlanSettingEntry row .1.3.6.1.4.1.4526.100.7.9.2.1.1
An entry in the wlanSettingTable. Each wlanSettingEntry represents
a wireless profile of 2.4GHz band .
Indexes
Column Syntax OID
wlanIndexSpecifies one of the 2 wireless profiles.Enumeration
Enumerated Values:
24band2dot4GHz
.1.3.6.1.4.1.4526.100.7.9.2.1.1.1
operateModeThis attribute shall indicate the desired wireless operating mode.
The option are:
dot11b - All 802.11b wireless stations can be used.
802.11g wireless stations can still be used
if they can operate in 802.11b mode.…
Enumerationr/w
Enumerated Values:
0dot11b
1dot11bg
2dot11ng
.1.3.6.1.4.1.4526.100.7.9.2.1.1.2
radioStatusThis attribute shall indicate the status of radio.
The default value is enable(1).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.3
channelThis attribute shall indicate the channel number to be
used. The default value is auto(0).
Enumerationr/w
Enumerated Values:
0auto
1ch1
2ch2
3ch3
4ch4
5ch5
6ch6
7ch7
8ch8
9ch9
10ch10
11ch11
12ch12
13ch13
14ch14
.1.3.6.1.4.1.4526.100.7.9.2.1.1.4
dataRateThis attribute shall indicate the transmit rate applicable to
802.11b, 802.11bg and 802.11n modes. When the operateMode is:

dot11b(0) - can set to 0:best, 2:1Mb/s, 4:2Mb/s,
11:5.5Mb/s, and 22:11 Mb/s.
…
Enumerationr/w
Enumerated Values:
0best
2rate1Mbps
4rate2Mbps
11rate5dot5Mbps
12rate6Mbps
18rate9Mbps
22rate11Mbps
24rate12Mbps
36rate18Mbps
48rate24Mbps
72rate36Mbps
96rate48Mbps
108rate54Mbps
.1.3.6.1.4.1.4526.100.7.9.2.1.1.5
wmmSupportThis field indicates the status of WMM(Wireless Multimedia) suport.
The default value is enable(1).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.6
beaconIntervalThis attribute shall indicate the Beacon Interval.
The default value is 100.
1024 microsecondInteger32r/w
Constraints:
range: 100-1000
.1.3.6.1.4.1.4526.100.7.9.2.1.1.7
rtsThresholdThis attribute shall indicate the RTS threshold.
The default value is 2347.
Integer32r/w
Constraints:
range: 0-2347
.1.3.6.1.4.1.4526.100.7.9.2.1.1.8
fragLengthThis attribute shall indicate the fragmentation threshold.
The default value is 2346.
Integer32r/w
Constraints:
range: 256-2346
.1.3.6.1.4.1.4526.100.7.9.2.1.1.9
dtimIntervalThis attribute shall indicate the beacon delivery traffic
indication message period in multiples of beaconInterval.
The default value is 3.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.4526.100.7.9.2.1.1.10
preambleTypeThis attribute shall indicate the preamble setting.
This setting is only applicable to 802.11b, 802.11bg
and 802.11ng modes. When set to auto(0), depending on
the station type, AP selects short or long preamble.
The de…
Enumerationr/w
Enumerated Values:
0auto
1long
.1.3.6.1.4.1.4526.100.7.9.2.1.1.11
txPowerThis attribute shall indicate the transmit power.
The default value is full(0).
Enumerationr/w
Enumerated Values:
0full
1half
2quarter
3eighth
4min
.1.3.6.1.4.1.4526.100.7.9.2.1.1.12
accessControlModeThe field indicates whether the access control list is
enabled and the source of the database of the access
control list.
Enumerationr/w
Enumerated Values:
0disable
1local
2server
.1.3.6.1.4.1.4526.100.7.9.2.1.1.13
rogueApDetectionThis attribute shall indicate the status of Rogue AP detection.
The default value is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.14
mcsRateThis attribute shall indicate the transmit rate to be used
in case of 11ng modes. Rate index of 0 means 15 Mbps
when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps
when the channel width is 20Mhz. Every rate…
Enumerationr/w
Enumerated Values:
0mcs0
1mcs1
2mcs2
3mcs3
4mcs4
5mcs5
6mcs6
7mcs7
8mcs8
9mcs9
10mcs10
11mcs11
12mcs12
13mcs13
14mcs14
15mcs15
99best
.1.3.6.1.4.1.4526.100.7.9.2.1.1.15
guardIntervalThis attribute shall indicate the guard interval. When set to auto(0),
depending on the station type, AP selects 400ns or 800ns guard interval.
The default value is auto(0).
Enumerationr/w
Enumerated Values:
0auto
800long
.1.3.6.1.4.1.4526.100.7.9.2.1.1.16
channelWidthThis attribute shall set the CWM mode to 20Mhz or 40Mhz
or automatically switches between 20 and 40 based on
channel conditions.
For 11ng mode, the default value is static20Mhz(0), when the channel is auto.
Enumerationr/w
Enumerated Values:
0static20Mhz
1static40Mhz
2dynamic20-40
.1.3.6.1.4.1.4526.100.7.9.2.1.1.17
ampduThis attribute shall enable or disable AMPDU aggregation.
It is enabled by default.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.18
ampduAggrLengthThis attribute shall set the AMPDU aggregation length.
The default value is 65535.
Integer32r/w
Constraints:
range: 1024-65535
.1.3.6.1.4.1.4526.100.7.9.2.1.1.19
rifsTransmissionThis attribute sets the status of rifsTransmission.
The default value of the attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.20
apModeSpecifies the device operation mode.
ap: device operates as an Access Point
p2p: device operates as a point-to-point wireless bridge
No STA are associated to the device in this mode
p2p_ap: device operates as a p…
Enumerationr/w
Enumerated Values:
0ap
1p2p
2p2p-ap
3p2mp-ap
4p2mp
5clientMode
.1.3.6.1.4.1.4526.100.7.9.2.1.1.21
uapsdStatusThis attribute shall indicate whether wmm power save.
The default value is enable(1) .
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.22
maxClientAssociationsThis attribute shall indicates the max wireless clients that allowed to
associated.When the value is set 0,and the wireless clients are not limited
Integer32r/w
Constraints:
range: 0-64
.1.3.6.1.4.1.4526.100.7.9.2.1.1.23
rogueApDetectionPolicyThis attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP.
If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec.
The default value …
Enumerationr/w
Enumerated Values:
1aggressive
5moderate
10mild
.1.3.6.1.4.1.4526.100.7.9.2.1.1.24
clientIsolationThis attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.2.1.1.25
.1.3.6.1.4.1.4526.100.7.9.3.1 · 1 row entry · 20 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vapSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::vapSettingTable'
VAP attributes setting table.
vapSettingEntry row .1.3.6.1.4.1.4526.100.7.9.3.1.1
VAP attributes setting table entry.
Column Syntax OID
vapIndexSpecifies one of the 8 VAP profiles.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.4526.100.7.9.3.1.1.1
vapProfileNameName of this VAP profile.OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4526.100.7.9.3.1.1.2
vapProfileStatusThis attribute shall indicate the status of this VAP profile.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.3.1.1.3
ssidThis attribute shall indicate SSID.Its length can't be larger than 32 .OctetStringr/w
Constraints:
range: 2-32
.1.3.6.1.4.1.4526.100.7.9.3.1.1.4
hideNetworkNameThis attribute shall indicate whether to broadcast wireless
network Name (SSID).
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.3.1.1.5
dynamicVlanThe field indicates the vlan Type
disable(0) : when disable vlan type is static.
optional(1) : dynamic vlan is enabled but if radius server do not return vlanId still allow station to connect.
required(2) : dynamic vla…
Enumerationr/w
Enumerated Values:
0disable
1optional
2required
.1.3.6.1.4.1.4526.100.7.9.3.1.1.6
vlanIDThis attribute shall indicate the VLAN ID of the VAP.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.4526.100.7.9.3.1.1.7
accessControlThis is enabled only for Static VLAN feature, that is when Dynamic VLAN is set to Disable.
This specifies to enable or disable access control on the profile.
Default value is Disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.3.1.1.8
accessControlPolicyThis is enabled only for Static VLAN feature, that is when Dynamic VLAN is set to Disable.
This define whether to connect the STA to default configured VLAN or just send disconnect to the STA,
if the vlan id returned f…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.3.1.1.9
clientSecuritySeperationThis attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.3.1.1.10
authenticationTypeThe field indicates how to authenticate the station.Enumerationr/w
Enumerated Values:
0open
1shared
2legacy802dot1x
4wpa
8wpa2
12wpaORwpa2
16wpapsk
32wpa2psk
48wpapskORwpa2psk
.1.3.6.1.4.1.4526.100.7.9.3.1.1.11
encryptionThe field indicates how to encrypt the packets sent to a station.Enumerationr/w
Enumerated Values:
0none
1wep
2tkip
4aes
6tkipORaes
.1.3.6.1.4.1.4526.100.7.9.3.1.1.12
presharedKeyThis attribute shall indicate preshared key used in the following
authenticationtype:
wpapsk(16),
wpa2psk(32),
wpapskORwpa2psk(48).
OctetStringr/w
Constraints:
range: 8-63
.1.3.6.1.4.1.4526.100.7.9.3.1.1.13
wepKeyTypeThe field shall indicate the type of WEP key.Enumerationr/w
Enumerated Values:
64hex64
128hex128
152hex152
.1.3.6.1.4.1.4526.100.7.9.3.1.1.14
wepKeyNoThe field indicates the number of default wep key.Enumerationr/w
Enumerated Values:
1wepKey1
2wepKey2
3wepKey3
4wepKey4
.1.3.6.1.4.1.4526.100.7.9.3.1.1.15
wepKey1The field indicates the key value of the first default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.3.1.1.16
wepKey2The field indicates the key value of the second default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.3.1.1.17
wepKey3The field indicates the key value of the third default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.3.1.1.18
wepKey4The field indicates the key value of the fourth default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.3.1.1.19
wepPassPhraseThis attribute shall indicate WEP pass phrase, used to
generate four WEP keys.
OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.4526.100.7.9.3.1.1.20
.1.3.6.1.4.1.4526.100.7.9.4.1 · 1 row entry · 10 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wdsSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wdsSettingTable'
WDS attributes in tablular form to allow for multiple
instances of wds setting profile.
wdsSettingEntry row .1.3.6.1.4.1.4526.100.7.9.4.1.1
An entry in the wdsTable.
Column Syntax OID
wdsIndexSpecifies one of the 4 wireless bridge profiles.Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4526.100.7.9.4.1.1.1
wdsProfileNameName of the wireless bridge profile.OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.4526.100.7.9.4.1.1.2
wdsProfileStatusThis attribute shall indicate the status of this wireless
bridge profile.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.4.1.1.3
remoteMacAddressThis attribute shall indicate the link partner's MAC address.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.4.1.1.4
wdsAuthenticationtypeThe field indicates how to authenticate the link partner.Enumerationr/w
Enumerated Values:
0open
2wpapsk
4wpa2psk
.1.3.6.1.4.1.4526.100.7.9.4.1.1.5
wdsEncryptionThe field indicates how to encrypt the packets sent to link partner.Enumerationr/w
Enumerated Values:
0none
1wep
2tkip
4aes
.1.3.6.1.4.1.4526.100.7.9.4.1.1.6
wdsPresharedKeyThis attribute shall indicate preshared key used by wpapsk or wpa2psk.OctetStringr/w
Constraints:
range: 8-63
.1.3.6.1.4.1.4526.100.7.9.4.1.1.7
wdsWepKeyTypeThe field shall indicate the type of WEP key.Enumerationr/w
Enumerated Values:
64hex64
128hex128
152hex152
.1.3.6.1.4.1.4526.100.7.9.4.1.1.8
wdsWepKeyThe field indicates the value of the WEP key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.4.1.1.9
wdsWepPassPhraseThis attribute shall indicate WEP pass phrase, used to
generate the WEP key.
OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.4526.100.7.9.4.1.1.10
.1.3.6.1.4.1.4526.100.7.9.5.1 · 1 row entry · 6 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wmmApEdcaSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wmmApEdcaSettingTable'
WMM settings for AP EDCA.
wmmApEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.9.5.1.1
AP Enhanced Distribution Channel Access Parameters
Column Syntax OID
wmmApEdcaQIndexSpecifies one of the 4 AP EDCA queues.
1: AC_BE
2: AC_BK
3: AC_VI
4: AC_VO
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4526.100.7.9.5.1.1.1
wmmApEdcaQNameQueues are defined for different types of data
(video or voice or data) transmitted from AP to station.
AC_BE (best effort) IP data is sent to this queue.
AC_BK (Background) Bulk data that requires maximum throughput a…
OctetString
Constraints:
range: 5-5
.1.3.6.1.4.1.4526.100.7.9.5.1.1.2
wmmApEdcaAifsThe Arbitration Inter-Frame Spacing (AIFS) specifies the wait time
(in microseconds) for data frames.
0: 0us
1: 32us
2: 64us
3: 96us
4: 128us
5: 160us
6: 192us
7: 224us
8: 255us
Integer32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.4526.100.7.9.5.1.1.3
wmmApEdcaCwMinThis parameter is input to the algorithm that determines
the initial random backoff wait time ('window') for retry of a
transmission. The value specified here in the Minimum Contention
Window is the upper limit (in m…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
.1.3.6.1.4.1.4526.100.7.9.5.1.1.4
wmmApEdcaCwMaxThe value specified here in the Maximum Contention Window
is the upper limit (in microseconds) for the doubling of the
random backoff value. This doubling continues until either the data
frame is sent or the Maximum …
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
.1.3.6.1.4.1.4526.100.7.9.5.1.1.5
wmmApEdcaMaxBurstThis value specifies (in microseconds) the Maximum
Burst Length allowed for packet bursts on the wireless
network. A packet burst is a collection of multiple
frames transmitted without header information. The decreas…
Integer32r/w
Constraints:
range: 0-8192
.1.3.6.1.4.1.4526.100.7.9.5.1.1.6
.1.3.6.1.4.1.4526.100.7.9.5.2 · 1 row entry · 6 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wmmStaEdcaSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wmmStaEdcaSettingTable'
WMM settings for STA EDCA.
wmmStaEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.9.5.2.1
Station Enhanced Distributed Channel Access (EDCA)
Parameters affect traffic flowing from the client station
to the access point
Column Syntax OID
wmmStaEdcaQIndexSpecifies one of the 4 STA EDCA Queues.
1: AC_BE
2: AC_BK
3: AC_VI
4: AC_VO
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.4526.100.7.9.5.2.1.1
wmmStaEdcaQNameQueues are defined for different types of data
(video or voice or data) transmitted from station-to-AP.
AC_BE (best effort) IP data is sent to this queue.
AC_BK (Background) Bulk data that requires maximum throughput a…
OctetString
Constraints:
range: 5-5
.1.3.6.1.4.1.4526.100.7.9.5.2.1.2
wmmStaEdcaAifsThe Arbitration Inter-Frame Spacing (AIFS) specifies the wait time
(in microseconds) for data frames.
0: 0us
1: 32us
2: 64us
3: 96us
4: 128us
5: 160us
6: 192us
7: 224us
8: 255us
Integer32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.4526.100.7.9.5.2.1.3
wmmStaEdcaCwMinThis parameter is input to the algorithm that determines the
initial random backoff wait time ('window') for retry of a transmission.
The value specified here in the Minimum Contention Window is the
upper limit (in mi…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
.1.3.6.1.4.1.4526.100.7.9.5.2.1.4
wmmStaEdcaCwMaxThe value specified here in the Maximum Contention Window is the
upper limit (in microseconds) for the doubling of the random
backoff value. This doubling continues until either the data frame
is sent or the Maximum C…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
.1.3.6.1.4.1.4526.100.7.9.5.2.1.5
wmmStaEdcaTxopLimitThe Transmission Opportunity (TXOP) is an interval of time
when a WMM client station has the right to initiate transmissions
onto the wireless medium (WM). This value specifies (in microseconds)
the Transmission Oppor…
Integer32r/w
Constraints:
range: 0-8192
.1.3.6.1.4.1.4526.100.7.9.5.2.1.6
.1.3.6.1.4.1.4526.100.7.9.7.2 · 1 row entry · 11 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wirelessStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wirelessStatTable'
Wireless interface statistics table.
wirelessStatEntry row .1.3.6.1.4.1.4526.100.7.9.7.2.1
Wireless interface statistics.
Indexes
Column Syntax OID
wlanRecvUnicastPacketthe field indicates the sum of received unicast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.1
wlanTransUnicastPacketthe field indicates the sum of transmitted unicast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.2
wlanRecvBroadcastPacketthe field indicates the sum of received broadcast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.3
wlanTransBroadcastPacketthe field indicates the sum of transmitted broadcast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.4
wlanRecvMulticastPacketthe field indicates the sum of received multicast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.5
wlanTransMulticastPacketthe field indicates the sum of transmitted multicast packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.6
wlanRecvPacketthe field indicates the sum of received packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.7
wlanTransPacketthe field indicates the sum of transmitted packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.8
wlanRecvBytesthe field indicates the sum of received bytes.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.9
wlanTransBytesthe field indicates the sum of transmitted bytes.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.10
wlanWrongSTAPacketsthe field indicates the sum of wlan wrong station packets.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.2.1.11
.1.3.6.1.4.1.4526.100.7.9.7.4 · 1 row entry · 25 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk radioStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::radioStatusTable'
List of virtual access point in a tabular form.
radioStatusEntry row .1.3.6.1.4.1.4526.100.7.9.7.4.1
An entry in the radioStatusTable.
Indexes
Column Syntax OID
numberOfStationsThis field indicates number of stations associated with wlan .Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.7.4.1.1
wlanRxPacketsTotalThe field indicates the total sum of the packets received.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.2
wlanRxBytesTotalThe field indicates the total sum of the bytes received.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4526.100.7.9.7.4.1.3
wlanTxPacketsTotalThe field indicates the total sum of the packets sent.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.4
wlanTxBytesTotalThe field indicates the total sum of the bytes sent.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4526.100.7.9.7.4.1.5
wlanDiscardPacketsTotalThe field indicates the total sum of the packets discard.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.6
wlanTxPacketFailTotalThe field indicates the total sum of the packets which failed to send.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.7
wlanTxRetryTotalThe field indicates the total sum of the packets which retry to send.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.8
wlanFcsFailCntTotalThe field indicates the total sum of the packets receved which FCS is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.9
wlanRtsFailCntTotalThe field indicates the total sum of the packets receved which RTS is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.10
wlanAckFailCntTotalThe field indicates the total sum of the packets receved which ACK is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.11
wlanCrcErrorTotalThe field indicates the total sum of the packets receved which CRC is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.12
wlanPhyErrorTotalThe field indicates the total sum of the packets receved which PHY is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.13
wlanMicErrorTotalThe field indicates the total sum of the packets receved which MIC is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.14
wlanKeyErrorTotalThe field indicates the total sum of the packets receved which KEY is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.15
wlanTxFifoErrorTotalThe field indicates the total sum of the packets transmit which FIFO is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.16
wlanRxFifoErrorTotalThe field indicates the total sum of the packets recieved which FIFO is error.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.17
wlanTxPayloadBytesTotalThe field indicates the total sum of the wlan packets sent excluding from the ap.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.18
wlanRxPayloadBytesTotalThe field indicates the total sum of the wlan packets received excluding to the ap.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.19
wlanPacketErrorRateTotalThe field indicates the total sum of the received error wlan packets rate.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.4526.100.7.9.7.4.1.20
wlanAuthRequestTotalThe field indicates the total sum of the authentiacation request from the station.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.4526.100.7.9.7.4.1.21
wlanAuthResponseTotalThe field indicates the total sum of the authentiacation response to the station.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.22
wlanSuccessConnectTotalThe field indicates the total sum of the successful connection .SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.23
wlanAbnormalDisconnectTotalThe filed indicates the total sum of the abnormal disconnect.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.24
wlanNormalDisconnectTotalThe filed indicates the total sum of the normal disconnect.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.4.1.25
.1.3.6.1.4.1.4526.100.7.9.7.5 · 1 row entry · 13 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vapStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::vapStatusTable'
List of virtual access point in a tabular form.
vapStatusEntry row .1.3.6.1.4.1.4526.100.7.9.7.5.1
An entry in the vapStatusTable.
Column Syntax OID
vapStatIndexSpecifies one of the 8 VAP profiles.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.4526.100.7.9.7.5.1.1
txByteCountThis attribute shall indicate transmitted bytes by the VAP .SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.2
txFrameCountThis attribute shall indicate transmitted frames by the VAP .SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.3
rxByteCountThis attribute shall indicate the recieved bytes by the VAP .SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.4
rxFrameCountThis attribute shall indicate the recieved bytes by the VAP .SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.5
txPayloadBytesthe field indicates the sum of send bytes excluding from the ap.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.6
rxPayloadBytesthe field indicates the sum of received bytes excluding to the ap.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.7
numberOfClientsThis attribute shall indicate number of clients associated with VAP .Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.7.5.1.8
clientsAuthRequestTotalThe field indicates the total sum of the authentiacation request from the station.Integer32
Constraints:
range: 1-100
.1.3.6.1.4.1.4526.100.7.9.7.5.1.9
clientsAuthResponseTotalThe field indicates the total sum of the authentiacation response to the station.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.10
clientsSuccessConnectTotalThe field indicates the total sum of the successful connection .SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.11
clientsAbnormalDisconnectTotalThe filed indicates the total sum of the abnormal disconnect.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.12
clientsNormalDisconnectTotalThe filed indicates the total sum of the normal disconnect.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.4526.100.7.9.7.5.1.13
.1.3.6.1.4.1.4526.100.7.9.8.1 · 1 row entry · 23 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk stationListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::stationListTable'
List of associated stations in a tabular form.
stationListEntry row .1.3.6.1.4.1.4526.100.7.9.8.1.1
An entry in the stationListTable.
Column Syntax OID
macAddressThis attribute shall indicate MAC address of the
associated stationID.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.1
clientIpaddrThis attribute shall indicate IP address of the associated stationID.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4526.100.7.9.8.1.1.2
associationTimeThis attribute shall indicate the time a station has been associated.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.3
clientWirelessModeThis attribute shall indicate the wireless mode of the
associated stationID.
Enumeration
Enumerated Values:
0dot11b
1dot11bg
2dot11ng
.1.3.6.1.4.1.4526.100.7.9.8.1.1.4
associatedSsidThis attribute shall indicate ssid of the VAP to which the
station is associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.5
associatedBssidThis attribute shall indicate bssid of the VAP to which the
station is associated.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.6
associatedSNRThis attribute shall indicate the noise margin of Ap
with respect to the its recieved signal from station.
0.25dBmInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.7
clientChannelWidthThis attribute shall indicate the channel width for the
associated station in 11n mode. Not applicable for a station
in 11b/g mode.
Enumeration
Enumerated Values:
0none
1static20MHz
2static40MHz
.1.3.6.1.4.1.4526.100.7.9.8.1.1.8
stationStatusThis attribute shall indicate the status of station.Enumeration
Enumerated Values:
0none
1authenticating
2authenticated
3associating
4associated
.1.3.6.1.4.1.4526.100.7.9.8.1.1.9
stationRssiReceive Signal Strength Indicator. This attribute shall indicate
the strength of an incomming signal of station.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.10
idleTimeThis attribute shall indicate the Idle time of station.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.11
stationChannelThis attribute shall indicate the channel number used.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.12
txDataRateThis attribute shall indicate the TX DataRate.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.13
rxDataRateThis attribute shall indicate the Rx DataRate.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.14
stationStateThis attribute shall indicate the station State.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.15
stationAuthenticationTypeThis attribute shall indicates how to authenticate the station.Enumeration
Enumerated Values:
0none
1open
2shared
3legacy8021x
4auto
5wpa
6wpa2
.1.3.6.1.4.1.4526.100.7.9.8.1.1.16
stationAIDThis attribute shall indicate the association ID value assigned
by the AP to identify the association.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.17
stationTxSeqThis attribute shall indicate the Transmit Sequence of the station.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.18
stationRxSeqThis attribute shall indicate the Receive Sequence of the station.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.19
stationCapabilityThis attribute shall indicate the capability of station associated.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.20
stationCipherThis attribute shall indicate the Cipher of station associated.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.8.1.1.21
stationRecvPayloadBytesThis attribute shall indicate the count of the payload bytes received
from the wireless client.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.22
stationTransPayloadBytesThis attribute shall indicate the count of the payload bytes sent
to the wireless client.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.8.1.1.23
.1.3.6.1.4.1.4526.100.7.9.15.1 · 1 row entry · 9 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk detectedApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::detectedApTable'
detectedAp Table shows list of detected neighbouring APs.
detectedApEntry row .1.3.6.1.4.1.4526.100.7.9.15.1.1
An entry in the detectedApTable.
Indexes
Column Syntax OID
apMacThis attribute shall indicate MAC address of the
detected AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.15.1.1.1
apSsidThis attribute shall indicate ssid of the detected AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.1.1.2
apPrivacyThis attribute shall indicate whether privacy is enabled.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4526.100.7.9.15.1.1.3
apBandThis attribute shall indicate the operating band of detected AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.1.1.4
apChannelThis attribute shall indicate the channel number used.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.1.1.5
apRateThis attribute shall indicate the rate.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.1.1.6
apBeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.1.1.7
apNumBeaconsThis attribute shall indicate the number of beacons received.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.1.1.8
apLastBeaconThis attribute shall indicate the time of the last beacon.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.1.1.9

knownApTable

table
.1.3.6.1.4.1.4526.100.7.9.15.2 · 1 row entry · 10 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk knownApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::knownApTable'
knownAp Table shows list of known APs.
knownApEntry row .1.3.6.1.4.1.4526.100.7.9.15.2.1
An entry in the knownApTable.
Column Syntax OID
knownApMacThis attribute shall indicate MAC address of the
known AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.15.2.1.1
knownApSsidThis attribute shall indicate ssid of the known AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.2.1.2
knownApPrivacyThis attribute shall indicate whether privacy is enabled.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4526.100.7.9.15.2.1.3
knownApBandThis attribute shall indicate the operating band of known AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.2.1.4
knownApChannelThis attribute shall indicate the channel number used.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.2.1.5
knownApRateThis attribute shall indicate the rate.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.2.1.6
knownApBeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.2.1.7
knownApNumBeaconsThis attribute shall indicate the number of beacons received.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.2.1.8
knownApLastBeaconThis attribute shall indicate the time of the last beacon.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.2.1.9
knownApEntryStatusThe Known AP Entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4526.100.7.9.15.2.1.10
.1.3.6.1.4.1.4526.100.7.9.15.3 · 1 row entry · 9 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk unknownApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::unknownApTable'
unknownAp Table shows list of unknown APs.
unknownApEntry row .1.3.6.1.4.1.4526.100.7.9.15.3.1
An entry in the unknownApTable.
Column Syntax OID
unknownApMacThis attribute shall indicate MAC address of the
unknown AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.15.3.1.1
unknownApSsidThis attribute shall indicate ssid of the unknown AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.3.1.2
unknownApPrivacyThis attribute shall indicate whether privacy is enabled.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4526.100.7.9.15.3.1.3
unknownApBandThis attribute shall indicate the operating band of unknown AP.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.3.1.4
unknownApChannelThis attribute shall indicate the channel number used.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.3.1.5
unknownApRateThis attribute shall indicate the rate.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.3.1.6
unknownApBeaconIntervalThis attribute shall indicate the beacon interval in kus (1.024 ms).Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.3.1.7
unknownApNumBeaconsThis attribute shall indicate the number of beacons received.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4526.100.7.9.15.3.1.8
unknownApLastBeaconThis attribute shall indicate the time of the last beacon.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.4526.100.7.9.15.3.1.9
.1.3.6.1.4.1.4526.100.7.9.16.1 · 1 row entry · 2 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wlanAccessControlLocalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::wlanAccessControlLocalTable'
ACL attributes in tablular form to allow for multiple
instances on an agent.
wlanAccessControlLocalEntry row .1.3.6.1.4.1.4526.100.7.9.16.1.1
An entry in the wlanAccessControlLocalTable.
Indexes
Column Syntax OID
aclMACThis field should indicate an MAC address entry in the
access control local database.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.16.1.1.1
aclMacStatusThe ACL Mac status.

Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4526.100.7.9.16.1.1.2
.1.3.6.1.4.1.4526.100.7.9.18.1 · 1 row entry · 13 columns
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk staSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNAP320' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNAP320::staSettingTable'
station attributes setting table.
staSettingEntry row .1.3.6.1.4.1.4526.100.7.9.18.1.1
station attributes setting table entry.
Indexes
Column Syntax OID
staSsidThis attribute shall indicate the station SSID.Its length can't be larger than 32 .OctetStringr/w
Constraints:
range: 2-32
.1.3.6.1.4.1.4526.100.7.9.18.1.1.1
staAuthenticationTypeThe field indicates how to authenticate the station.Enumerationr/w
Enumerated Values:
0open
1shared
16wpapsk
32wpa2psk
.1.3.6.1.4.1.4526.100.7.9.18.1.1.2
staEncryptionThe field indicates how to encrypt the packets sent to a station.Enumerationr/w
Enumerated Values:
0none
1wep
2tkip
4aes
.1.3.6.1.4.1.4526.100.7.9.18.1.1.3
staPresharedKeyThis attribute shall indicate preshared key used in the following
authenticationtype:
wpapsk(16),
wpa2psk(32),
wpapskORwpa2psk(48).
OctetStringr/w
Constraints:
range: 8-63
.1.3.6.1.4.1.4526.100.7.9.18.1.1.4
staWepKeyTypeThe field shall indicate the type of WEP key.Enumerationr/w
Enumerated Values:
64hex64
128hex128
152hex152
.1.3.6.1.4.1.4526.100.7.9.18.1.1.5
staWepKeyNoThe field indicates the number of default wep key.Enumerationr/w
Enumerated Values:
1wepKey1
2wepKey2
3wepKey3
4wepKey4
.1.3.6.1.4.1.4526.100.7.9.18.1.1.6
staWepKey1The field indicates the key value of the first default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.18.1.1.7
staWepKey2The field indicates the key value of the second default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.18.1.1.8
staWepKey3The field indicates the key value of the third default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.18.1.1.9
staWepKey4The field indicates the key value of the fourth default wep key.OctetStringr/w
Constraints:
range: 1-40
.1.3.6.1.4.1.4526.100.7.9.18.1.1.10
staWepPassPhraseThis attribute shall indicate WEP pass phrase, used to
generate four WEP keys.
OctetStringr/w
Constraints:
range: 1-39
.1.3.6.1.4.1.4526.100.7.9.18.1.1.11
staMacCloneThis option appears only in client mode. Use it to configure a new MAC address if desired.
Default value is Disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.4526.100.7.9.18.1.1.12
staMacCloneAddrIf the MAC Clone option has been enabled enter the new MAC address in hexadecimal format.
It will be used by the AP client in place of its default physical address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.4526.100.7.9.18.1.1.13