wlsxPsePortStatus
WLSX-POE-MIB ·
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4
Object
column
Enumeration
This object indicates the status of the port.
unknown(1) - indicates either a state of off with the
reason being not known or the state is
on.
offAdmin(2) - indicates the port is administratively
disabled.
offPowerManagement(3) - indicates the port is off due to power
management.
offIllegalClass(4) - indicates the port is off because the PD
is of illegal class.
offDetectionProgress(5)- indicates the port is off because the PD
detection is in progress.
offHardwareError(6) - indicates the port is off because of
hardware error.
offNonStandardPd(7) - indicates the port is off because the PD
is a non standard one.
Context
- MIB
- WLSX-POE-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsxPsePortEntry
- Table
- wlsxPsePortTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | offAdmin |
3 | offPowerManagement |
4 | offIllegalClass |
5 | offDetectionProgress |
6 | offHardwareError |
7 | offNonStandardPd |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlsxPsePortIndex This variable uniquely identifies the power
ethernet port for which this entry
is populated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1 |
| wlsxPsePortDefaultPowerMax This object indicates the default maximum power available
on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10 |
| wlsxPsePortPowerAllocated This object indicates the configured power allocation
on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11 |
| wlsxPsePortPowerConsumed This object gives the power consumption by the PD on this port. | column | milliwatts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12 |
| wlsxPsePortVoltage This object indicates the voltage on this port. | column | milliVolts SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13 |
| wlsxPsePortCurrent This object indicates the current on this port. | column | milliAmps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14 |
| wlsxPsePortAdminStatus Admin status of a power ethernet port.
A value of enable(1) means that the port
has PSE functions enabled on it.
A value of disable(2) means that the… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2 |
| wlsxPsePortState This object indicates the status of the port.
The reason for these states is indicated by wlsxPsePortStatus.
on(1) - indicates that PSE is sourcing power.
off(2) -… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3 |
| wlsxPsePortDiscoveryMode This object indicates the method of discovery used
by the system for the detection of the Powered Device(PD).
A value of unknown(0) means that the discovery method… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 |
| wlsxPsePortIsPdDetected This object indicates if a Powered Device(PD) is
detected on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6 |
| wlsxPsePortIsIeeePd This object indicates the IEEE compliance of a
Powered Device(PD).
A value of true(1) means the Powered Device(PD)
is IEEE compliant.
A value of fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7 |
| wlsxPsePortPdClass This object indicates the Power classification of the
Powered Device(PD) connected on the port.
A value of 'class0(1)' indicates that the power
classification of … | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8 |
| wlsxPsePortPriority This object indicates the configured priority for this port.
low(1) - indicates the priority of the port is low.
high(2) - indicates the priority of the po… | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9 |